Acumen Camera IP Speed Dome Series AiPE1H User Manual

 10 
 Auto Iris: Set the device to auto Iris mode. 
 
Focus +: Focus far 
Focus -: Focus near 
 Auto Focus: Set the device to auto focus mode. 
 OSD Enter: Enter PTZ device’s internal setting. 
 OSD Esc: Exit PTZ device’s internal setting. 
 Wide: Lens zoom out 
 Tele: Lens zoom in 
 Preset: Preset points recall 
 
  
Chapter 3-2-1    PT Mode There are four Pan and Tilt Modes (PT) for users to operate the PTZ device.    To select one of the PT modes, please click on the icon under PT Mode panel.   
 
PT...

 11 
Pan mode at absolute position 
 
Pan and tilt modes at absolute position 
 
Chapter 3-2-2 ePTZ To perform ActiveX ePTZ feature, please use a computer mouse to drag on the ActiveX control. 
 
AI Universal ActiveX control becomes eZoom mode. Please use computer mouse pointing to the sub-window of PIP view.    Dragging the sub-window can perform ePan and eTilt.    Using mouse scroll button can perform zoom in and out features.  Performing right-mouse click on the video can disable ePTZ feature....

 12 
Chapter 3-2-3 Camera Control Panel Control panel buttons are described as below: 
 
Chapter 3-2-4    Two-way Audio 
For two-way audio, please click on Microphone icon for speaking to the remote site.    To stop speaking to the remote site, please click on Microphone icon again. 
To listen to the remote site, please click on Speaker icon for listening to the remote site. To stop listening to the remote site, please click on Speaker icon again.   
 
Chapter 3-2-5 Record in a Local PC To record into a...

 13 
Chapter 3-3 Configurations H.264 D1 Video Server or AiP camera’s administrator can configure the device via standard HTML web pages.    This chapter explains the detail of each configuration setting.  
Chapter 3-3-1 Server Settings Server settings contain H.264 D1 video server or AiP camera server’s system information such as MAC address, firmware version, users, system timer, and other system settings.    To change or to use these options, please follow the instructions at this section. 
 
Mac...

 14 
radio button to ON.  
 To change account name, please type the new account name in Account edit box.    To change  new  password,  please  type  the  new  password  in  the  New  Password  edit  box.   Click  on Submit  button  to  update  the  user  settings.    To  delete  a  user,  please  click  on “Remove User” button. 
 
Administrator: Enable or disable setup mode for a user. Camera Control Panel: Enable or disable Control Panel for a user. PTZ: Enable or disable PTZ feature for a user....

 15 
 
Synchronize with a PC A user can synchronize the PC system timer to the AiP cameras system timer.  
Chapter 3-3-4    System Setting Load Default feature allows to load manufacturing default.    There are certain critical settings such as IP addresses and video system which are not affected by this operation.   To reboot H.264 D1 video server or AiP camera, click on Reboot System hyper link.    
 
To update firmware of H.264 D1 video server or AiP camera, please click on Firmware      Update hyper...

 16 
camera is 192.168.0.200.    A user can use this IP address to verify the network connection between a local PC and H.264 D1 video server or AiP camera using Web Browser.    
For local area network configuration, please enter, at least, IP address, Subnet Mask, and Gateway IP.    Click Submit button to update these settings. 
 
 Default DNS IP Address — Primary Domain Name Server, the IP address of the domain name server  Second DNS IP Address — Secondary Domain Name Server, the IP address of the...

 17 
     
Chapter 3-4-4 SMTP Service Alarm or motion notification feature can send an alarm or motion detection snapshot to an E-mail account.    To enable alarm or motion sending E-mail feature, please setup the following email accounts.   E-mail receiver setting E-mail address— E-mail address of the recipient  E-mail sender setting E-mail address— E-mail address of the sender  Auto E-mail sent snapshots—constantly send JPEG snapshots within E-mail dwell time.  SMTP server— Sender’s SMTP server...

 18 
 
Chapter 3-4-6 DDNS Settings DNS stands for domain name server, it provides domain name translation service for a device’s IP.    Basically, domain name is easier to remember than numeric values (IP).   DNS service requires service registration and subscription. DynDNS (DDNS) provides domain name service without subscription.  
 
 
 
To use www.ddnsipcam.com, you can use the last 6 digits of the MAC address for the host name and default account. The default password is pass. If the AiP camera is on...

 19 
Explorer, you can find cameras that are discovered by Windows via UPnP protocol. 
Chapter 3-5 Video Settings This section describes the details in setting the H.264 video’s attributes.    The settings of bit rate control, video input, and video resolution can be configured. 
Chapter 3-5-1 Video General For transmitting H.264 video over low bandwidth network such as Internet, please set the bit rate close to network upload bandwidth.    H.264 AiP camera can encode video frames based on the bit rate...