Acumen Camera Dome Series AiPR24K User Manual

Chapter 3 Start Using H.264 FULL HD AiP camera Network Features  
  After  login  H.264  FULL  HD  AiP  camera  as  administrator,  there  are two  main 
features —system  operation  and  configuration.  Operation  and  configuration 
features are described as follows:  
 
Chapter 3 -1 AiP camera Operational HTML Page 
 
H.264 FULL HD Series operational HTML page layout  
  3. 
 
 
  1. 
 
  4. 
  2. 
 
 
 
 
 
 
  1. Control panel —AiP camera control panel.   
 
2. AI  Universal  ActiveX  control...

Chapter 3-2 -1 ePTZ  
  To operate AiP camera DSP’s ePTZ, please enable ePTZ feature on the main 
page. A user can operate up, down, left, right, zoom in, zoom out, and presets 
on main page.  
 
 
  W hen ePTZ is off, AI Universal ActiveX control also provides ePTZ (electronicall y 
pan, tilt, and zoom) feature. To perform ActiveX ePTZ feature, please use a 
computer mouse to drag on the ActiveX control.  
 
 
 
 
 
 
 
 
 
 
 
  AI Universal ActiveX control becomes eZoom mode....

Please use computer mouse pointing to the sub-window of PI P view. Dragging 
the sub-window can perform ePan and eTilt. Using mouse scroll button can 
perform zoom in and out features. 
  Performing right -mouse click on the video can disable ePTZ feature.  
 
Chapter 3 -2 -2 Region of Interest (ROI)  
 
For D1 and below resolution, ROI feature can apply to the main video stream. 
Main video stream remains the biggest video resolution such as 1080P.  The sub-
stream can be cropped and scaled based on the...

 Perform zoom in and out operations for ePTZ or ROI.   
Speed 7KH 37= VSHHG RI DERYH RSHUDWLRQV.   
 
Chapter 3-2 -4 Two -way Audio  
 
  For two -way audio, please click on Microphone icon for speaking to the remote 
site. To stop speaking to the remote site, please click on Microphone icon again.  
  To listen to the remote site, please click Speaker icon for listening to the remote site. 
To stop listening to the remote site, please click on Speaker icon again.  
  Note : Only IP camera models with...

Chapter 3-3 -1 Server Settings  
  Server settings contain H.264 FULL HD  AiP camera server’s system information 
such as MAC address, firmware version, users, system timer, and other system 
settings. To change or to use these options, please follow the instructions at this 
section.  
 
 
 
 
 
 
 
 
 
 
 
 
 
  Firmware Version  
 
Firmware update allows a user to upgrade H.264 FULL HD AiP camera’s 
firmware remotely. A user can use firmware version to verify if the device has 
the latest version....

Chapter 3-3 -2 User Settings  
  There are ten user accounts allowed for the system. Each account can be 
configured for its access rights. To add/edit a user, please click on Add/Edit 
User button. To access H.264 FULL HD AiP camera without authentication, set 
Bypass Logon radio button to ON.  
 
 
 
 
 
 
 
  To  change  account  name,  please  type  new  account  name  in  Account  edit  box.  
To  change  new  password,  please  type  the  new  password  in  the  New  Password 
edit  box.  Click  on...

Chapter 3-3 -3 Timer  
  H.264 FULL HD AiP camera allows a user to change system timer via standard 
HTML web page. To change H.264 FULL HD AiP camera’s system timer,  please 
enter the date and time in the edit boxes. Click on Submit button to apply this 
operation.  
 
 
 
 
 
 
 
 
  Synchronize with NTP  
 
To synchronize Internet time system, check Auto Synchronize option to “Every 
Hour”.  H.264  FULL  HD  AiP  camera  synchronizes  its  system  timer  with  a  time 
server every hour.  
  Note:...

To update firmware of H.264 FULL HD AiP camera, please click 
on Firmware 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  17   

Update hyper link. Locate “flasham.bin” in your computer by clicking the Browse 
button. Click Submit button to finish firmware upgrade. To ensure the quality of 
transmission, please make sure that there is no user accessing H.264 FULL HD 
AiP camera during firmware upgrade.  
 
 
 
 
 
 
 
 
 
 
Chapter 3 -4 Network  
  H.264 FULL HD AiP camera provides Internet protocols including IP, DHCP, and 
DDNS.  A  user  can  configure  these  Internet  protocol  settings.  To  setup  above, 
please read the...

 
 
 
 
 
 For Internet access configuration, please contact your local ISP for global IP 
address. Once the physical Internet connection gets installed, enter IP address 
(global), Subnet Mask, and Gateway IP from the ISP.  
    Default  DNS  IP  Address —First  Domain  Name  Server,  the  IP  address  of 
the  domain name server  

  Second  DNS  IP  Address —Second  Domain  Name  Server,  the  IP  address  of 
the domain name server, a backup DNS server for default DNS  

  PPPoE Account...