Acumen Camera Dome Series AiPR24K User Manual

AirForce Dome Series 
H.264 HD AiP cameras
INSTRUCTION MANUAL   

Executive Summary 
  Full HD AiP cameras, AirForce Series, adopts the latest compression 
technologies providing 4 -Streaming of H.264 and JPEG in different resolutions. 
4-Streaming technologies  allow transmitting digital video at various bitrate and 
frame rate to fit both high and low bandwidth network environment.  
  Full HD AiP camera series are equipped with 2, 3, or 5 progressive mega-pixel 
CMOS providing superior video quality. The DSP technologies of the AiP 
cameras provide wide dynamic...

  Dynamic DNS (DDNS) supported Network 
time protocol (NTP) supported  

  Support PCM/G.711  

  Support ONVIF protocol 
Support AIM Software HD 2.6  
 
Trademark Acknowledgments  
 
Microsoft, W indows 2000, W indows XP, W indows Vista, W indows 7, ActiveX, 
and Internet Explorer are registered t rademarks of Microsoft Corporation in the 
U.S. and/or other countries.  
  Java and all Java -based trademarks and logos are trademarks or registered 
trademarks of Sun Microsystems, Inc. in the...

Other References 
 
Mobile phone  
 
For free mobile surveillance, please  refer to eMobile document in the product CD 
or download the document from our company web site.  
 
AI Universal ActiveX Control  
 
Sample code and document are included in product CD and can be downloaded 
from our company web site.  
 
AI HTTP API  
 
For non-ONVIF integration, please see AI HTTP API document. W e adopt 
HTTP API document for all Full HD AiP cameras.  
 
Caution  
   Do not drop or strike this equipment  
...

Table of Content 
 
  Chapter 1   System Overvie w ................................ ................  6  
 
  Chapter 2   Before Accessing AiP camera................................ .....  7  
 
 Chapter 2 -1 Configure IP Address Using IPScan Utilit y ......................   7  
 
 Chapter 2 -2 Configure IP Address Using HTML Page  .......................  8  
 
 Chapter 2 -3 Internet Browser Setting & Software Component Require d .......   8  
 
 Chapter 2 -4 Login ...................................

 Chapter 3 -5-3 Video Qualit y ................................ ..........   2 4 
 
 Chapter 3 -5-4 MoonLight functio n ................................ .....   2 6 
 
 Chapter 3 -5-5 Privacy Mas k ................................ ..........   2 6 
 
 Chapter 3 -5-6 Region of Interest (ROI ) ................................ .   2 7 
 
 Chapter 3 -6 IR Cut Removabl e ................................ ..........   2 8 
 
 Chapter 3 -7 SD Card Recordin g ................................ .........   2 8...

Chapter 1 System Overview 
 
Chapter 1 -1 System Requirements  
 
The AiP camera’s  Full HD H.264 video compression technology can provide 
high compression rate and superior video quality. However, the performance 
highly depends on both CPU computational power of a client PC and the 
network bandwidth for transmitting video streaming. The  following sections 
specify system requirement for running Full HD H.264 AiP camera:  
 
Chapter 1 -2 Software Requirements 
 
AI Universal ActiveX software...

Chapter 2 Before Accessing AiP camera 
  Before accessing the AiP camera, make sure that the camera’s RJ -45 network 
cable, audio cable, and AiP camera’s power cable are properly installed. For 
setup IP address, please consult your network administr ator for available IP 
addresses. The default IP address of AiP camera is 192.168.0.200. User can 
also use default IP address to verify AiP camera’s network connection.  
 
Chapter 2 -1 Configure IP Address Using IPScan Utility  
  To configure IP address...

Chapter 2-2 Configure IP Address Using HTML Page  
  To change IP address using HTML page, please first type the default IP 
address, 192.168.0.200 in Internet browser and follow steps below:  
    Logon  H.264  FULL  HD  AiP  camera  using  default  username  and 
password —“admin” and “pass”.  

  Click on “Configure” hyper link.  

  Click on “Network ->General” hyper link.  

  Type  or  modify  edit  box  for  IP  address,  subnet  mask,  gateway,  or  HTTP  
connection port.  

  Click...

Chapter 2-4 Login  
  There are two levels of user authentication including administrator and guest 
for accessing the H.264 FULL HD AiP camera.  
 
 
 
 
 
 
 
 
 
 
 
 
 
The default settings of username and password are described as follows:  
 
 
A dmi ni strator *XHVW 
8VHUQDPH DGPLQ JXHVW 
3DVVZRUG SDVV JXHVW 
  To logon the H.264 FULL HD AiP camera, please type username and 
password in logon HTML page and click on Submit button to enter the system.  
 
 
 
 
 
 
 
 
 
 
  9