Acumen Camera Dome Series AiPP53N User Manual

							Chapter 3-4-3 HTTP & RTSP Service  HTTP protocol is a reliable protocol for sending video streaming. Port forwarding technology can be used for sending video over Internet. The detail is described in the appendix. For changing HTTP service’s port number, please consult available port number from your network administrator. Change the port number at the port field and click on “Submit” button. 
 
  
 
 
 Chapter 3-4-4 SMTP Service  Alarm  or  motion  notification  feature can  send  an  alarm  or  motion  detection snapshot to  an  E-mail  account.  To  enable  alarm  or  motion  sending  E-mail feature, please setup the following email accounts. 
  
 
  
 
  
 
  
 
  
 
  
 
 20  
						

							 E-mail receiver setting 
E-mail address— E-mail address of the recipient 
 E-mail sender setting E-mail address— E-mail address of the sender  Auto  E-mail  sent  with  snapshot—constantly  send  JPEG  snapshot  within  E-mail dwell time.  SMTP server— Sender’s SMTP server 
Authorization— SMTP server’s authorization option if applicable Authorization account— Account of the SMTP server Authorization password— Password of the account 
 To send a testing snapshot to a SMTP server, please click “Send” button to test and to verify the connection of the SMTP server. 
 Chapter 3-4-5 FTP Service  Alarm or motion notification feature can send alarm or motion detection snapshot to an FTP account. To enable alarm or motion sending FTP feature, please setup the following FTP account information. 
  
 
  
 
  
 
  
 
  
 
  
 
 21  
						

							 FTP server IP/DNS— IP address or domain name of the FTP server  Account— Account of the FTP server  Password— Password of the account  Directory—File path for storing the JPEG snapshots  Prefix—Prefix of the JPEG filename  Date format—Date format string for the JPEG filename  Postfix—Postfix of the JPEG filename  Auto FTP sent—Constantly send JPEG snapshot within FTP dwell time.  FTP sent time—Schedule FTP snapshot at specific time 
 Chapter 3-4-6 DDNS Settings  DNS stands for domain name server, it provides domain name translation service for a device’s IP. Basically, domain name is easier to remember than numeric values (IP). DNS service requires service registration and subscription. DynDNS (DDNS) provides domain name service without subscription. 
 
 
  
 
  
 
  
 Note: DDNS feature requires Internet connection. 
 To use  www.ddnsipcam.com, you can use the last 6 digits of the MAC address as the host  name  with  default  account,  the  last  6  digits  of  the  MAC  address,  and  the  default password, pass, if the AiP camera is on Internet with global IP address.  The AiP camera tries to automatically register to  www.ddnsipcam.com without further registering. For example, type “24094f.ddnsipcam.com” in a browser with login name “24094f” and password “pass” for login into the AiP camera, if the AiP camera is on Internet.  22  
						

							Chapter 3-5 Video Settings  This section describes the details in setting the H.264 FULL HD video’s attributes. Bit rate control, video input, and video resolution, settings can be configured. 
 Chapter 3-5-1 Video General  For transmitting H.264 FULL HD video over low bandwidth network such as Internet, please set the bit rate close to network upload bandwidth. H.264 FULL HD can encode frames based on the bit rate setting. 
 
 
  
 
  
 
  
 
  
 
  
 
  
 
  Profiles: Selections of streaming combination  Profile Name: Description of the profile  Compression: compression type of the profile  Resolution: the resolution of the compression  VBR/CBR:  VBR:  Video  quality  encoding  mode/constant  bit  rate  encoding mode.  23  
						

							 Bit Rate: Maximum bit rate available for a network connection  Output Frame Rate: the frame rate of the profile  GOP: I frame period per second  Video Output: NTSC/PAL video system  Power line frequency: 60Hz/50Hz lighting power frequency 
 Chapter 3-5-2 Weighted Streaming Mode  W eighted streaming mode is activated when an alarm went off. The streaming goes to the maximum speed, for example 30 FPS. If there is no alarm activity, the streaming stays one frame per second for saving bandwidth and storage. 
 Alarm Interval  
 
  
 Chapter 3-5-3 Video Quality  To  setup  video  quality,  please  adjust  brightness,  contrast,  hue, saturation,  and sharpness  accordingly.  The  AiP  camera  can  be  set  for  day  and/or  night  video quality for best video quality. 
 Day or Night Video Quality Mode  Day or night video quality can be fine tuned separately; the quality setting is scheduled based on the IR Cut scheduling table.  
 
  
 
  
 
 
 24  
						

							To setup Exposure Control, Automatic Gain Control, W hite Balance Control, please adjust the value accordingly.  
 
  
 
  
 
  
 
  
 To increase, the sensitivity at nights, please adjust Sense Up feature.  Exposure Va lue: Adjust the va lue of the  image e xposure  WDR: Enable or disable wide dynamic range feature.  Black-light Compensation: Increase the exposure to the darker object.  Shutter limited: Min and max shutter range  W hite  Balance  Control:  Automatically  adjust  itself  depending  on  the ambient light including tungsten, indoor, fluorescents, or outdoor.  Mirror: Video mirroring  Flip: Video flipping 
 MoonLight function   Auto Gain Control, AGC (MoonLight function): Increase the gain of the video signal. If AGC can not still gain enough light, please set the Sense-Up feature. However, Sense-Up feature might cause motion blur at night.  3D Noise Reduction: Reduce noise at night.  Sense-Up:  Slow  shutter  feature  for  increasing  CMOS  sensitivity  at night. 
 
 
 25  
						

							No Sense-Up 3 Frame Sense-Up  
  
 
  
 
 Chapter 3-5-4 MoonLight function  MoonLight function feature is for low-light and high sensitivity DSP control enabling outstanding video quality at difficult environment. MoonLight function technology can be used for both black-n-white and/or color video mode. To do so, please first enable Auto Gain Control (AGC) setting. However, the combinational use of 3D noise reduction (3D DNR) can even reduce noise at low light environment. AGC and 3D DNR do not cause motion blur. If the sensitivity is still not good for the environment, Sense-Up feature can then be used. However, the drawback can cause motion blur at low light condition.  Chapter 3-5-5 Privacy Mask  Each  AiP  camera  has  four  privacy  masks.  A  user can  define the  privacy  mask  for security  reason.  To  use  it, simply  select  the  mask  number and  drag  the  mask  on video area. 
  
 
  
 
  
 
  
 
 26  
						

							Chapter 3-5-6 Region of Interest (ROI)  Region  of  interest  (ROI)  feature  is  for  sub-stream  (D1  or  CIF)  video  buffer  to scale  and  to  crop  on  main  video  buffer  (1080P)  to  meet  best-fit  video  area.  The major purpose is to use sub-stream for saving storage or bandwidth. 
 
Not Important Area  
  
 
 Crop & Scale to D1   
 
 To  enable  ROI  feature,  please  first  select  “Enable  ROI”. Click  on  Zoom  Out  or  In button to get best-fit video area.   
 
  
 
  
 
  
 
  
 
  
 27  
						

							Chapter 3-6 IR Cut Removable  IR Cut removable allows to schedule IR activation by (1) auto, (2) day, (3) night, or (4) schedule. W hen the setting is set to "Auto", IR activation is determined by the light sensor. "Night" setting means that the IR cut filter is removed. "Day" setting means that the IR cut filter is forced to be always on. W hen activation schedule is enabled, IR cut filter can be scheduled based on a specific time frame. For example, a user can set the IR cut activation time starting from 19:00 pm (day to night time) until 6:00 am (night to day time). 
  
 
  
 
  
 
 Chapter 3-7 SD Card Recording  To record video on SD Card, please insert SD card into the SD card slot. Enable SD card recording feature. The AiP camera can start to record video into the SD card. 
 Chapter 3-7-1 SD Card Recording Setting  For SD card recording setting, please see the following for detail.  
 
  
 
  
 
  
 
 28  
						

							 SD Recording: Enable SD card recording.  Alar m/Motion  Triggering: Digital  input,  face  detection,  tampering detection, and motion detection SD card recording.  Recording Time: Post a lar m recording time .  Continuous: Continuous recording mode  No  Network  Activity: If there is no network connection, perform SD recording.  Recording Format: Recording resolution  SD System Status: SD Linux mounting status.  SD Card State: SD card inserting status  SD Card Capacity: SD card total capacity  SD Card Free Space: SD card free space 
 To  un-mount  the  SD  card,  please  click  “un-mount  SD  Card”  button.  It  might crash the file system of the SD card, if a user does not un-mount the SD card properly. 
 
 
  
 
  
 
  
 
  
 
  
 
  
 
 29