Acumen Camera Dome Series AiPP53N User Manual
Here you can view all the pages of manual Acumen Camera Dome Series AiPP53N User Manual. The Acumen manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 1
AirForce Dome Series H.264 HD AiP cameras INSTRUCTION MANUAL
Page 2
Executive Summary Full HD AiP cameras, AirForce Series, adopts the latest compression technologies providing 4-Streaming of H.264 and JPEG in different resolutions. 4-Streaming technologies allow transmitting digital video at various bitrate and frame rate to fit both high and low bandwidth network environment. Full HD AiP camera series are equipped with 2, 3, or 5 progressive mega-pixel CMOS providing superior video quality. The DSP technologies of the AiP cameras provide wide dynamic range (W DR),...
Page 3
Dynamic DNS (DDNS) supported Network time protocol (NTP) supported Support PCM/G.711 Support ONVIF protocol Support AIM Software HD 2.6 Trademark Acknowledgments Microsoft, W indows 2000, W indows XP, W indows Vista, W indows 7, ActiveX, and Internet Explorer are registered trademarks of Microsoft Corporation in the U.S. and/or other countries. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other...
Page 4
Other References Mobile phone For free mobile surveillance, please refer to eMobile document in the product CD or download the document from our company web site. AI Universal ActiveX Control Sample code and document are included in product CD and can be downloaded from our company web site. AI HTTP API For non-ONVIF integration, please see AI HTTP API document. W e adopt HTTP API document for all Full HD AiP cameras. Caution Do not drop or strike this equipment Do not install the...
Page 5
Table of Content Chapter 1 System Overview ................................................ 6 Chapter 2 Before Accessing AiP camera..................................... 7 Chapter 2-1 Configure IP Address Using IPScan Utility ...................... 7 Chapter 2-2 Configure IP Address Using HTML Page ....................... 8 Chapter 2-3 Internet Browser Setting & Software Component Required ....... 8 Chapter 2-4 Login ....................................................... 9 Chapter...
Page 6
Chapter 3-5-3 Video Quality .......................................... 24 Chapter 3-5-4 MoonLight function ..................................... 26 Chapter 3-5-5 Privacy Mask .......................................... 26 Chapter 3-5-6 Region of Interest (ROI) ................................. 27 Chapter 3-6 IR Cut Removable .......................................... 28 Chapter 3-7 SD Card Recording ......................................... 28 Chapter 3-7-1 SD Card Recording Setting...
Page 7
Chapter 1 System Overview Chapter 1-1 System Requirements The AiP camera’s Full HD H.264 video compression technology can provide high compression rate and superior video quality. However, the performance highly depends on both CPU computational power of a client PC and the network bandwidth for transmitting video streaming. The following sections specify system requirement for running Full HD H.264 AiP camera: Chapter 1-2 Software Requirements AI Universal ActiveX software components are required...
Page 8
Chapter 2 Before Accessing AiP camera Before accessing the AiP camera, make sure that the camera’s RJ-45 network cable, audio cable, and AiP camera’s power cable are properly installed. For setup IP address, please consult your network administrator for available IP addresses. The default IP address of AiP camera is 192.168.0.200. User can also use default IP address to verify AiP camera’s network connection. Chapter 2-1 Configure IP Address Using IPScan Utility To configure IP address using IPScan...
Page 9
Chapter 2-2 Configure IP Address Using HTML Page To change IP address using HTML page, please first type the default IP address, 192.168.0.200 in Internet browser and follow steps below: Logon H.264 FULL HD AiP camera using default username and password—“admin” and “pass”. Click on “Configure” hyper link. Click on “Network->General” hyper link. Type or modify edit box for IP address, subnet mask, gateway, or HTTP connection port. Click on Submit button. ...
Page 10
Chapter 2-4 Login There are two levels of user authentication including administrator and guest for accessing the H.264 FULL HD AiP camera. The default settings of username and password are described as follows: A dmi ni strator Guest Username admin guest Password pass guest To logon the H.264 FULL HD AiP camera, please type username and password in logon HTML page and click on Submit button to enter the system. 9