Acer Xs X13 Users Guide

21
EnglishImage
Projection
• Front-Desktop: The factory default setting.
• Front-Ceiling: When you select this function, the 
projector inverts the image for ceiling-mounted 
projection.
• Rear-Desktop: When you select this function, the 
projector reverses the image so that you can project 
behind a translucent screen.
• Rear-Ceiling: When you select this function, the 
projector reverses an d inverts the image at same time. 
You can project from behind a translucent screen with 
ceiling mounted...

22
English
SharpnessAdjusts the sharpness of the image.•Press   to decrease the sharpness.
•Press   to increase the sharpness.
H. Position 
(Horizontal 
Position)
•Press   to move the image left.
•Press   to move the image right.
V. Position 
(Vertical 
Position)
•Press   to move the image down.
•Press   to move the image up.
FrequencyChanges the projector’s refresh rate to match the frequency 
of your computer’s graphics card. If you experience a vertical 
flickering bar in the projected image, use this...

23
English
Note: H. Position, V. Position, Frequency and Tracking functions 
are not supported under video mode.
Note: Sharpness function is not supported under computer mode.
Note: Supported 3D signal timings:
It needs correct settings on graphics card 3D application program for correct 
3D display.
The SW players, such as Stereoscopic Player and DDD TriDef Media Player 
can support 3D format files. You can download these players on the web 
page below.
- Stereoscopic Player (Trial):...

24
English
Setting
Menu LocationChooses the OSD menu locati on on the display screen.
HDMI Color 
Range 
(S1210Hn/
S1213Hn/
T212DT/XS-
X13HG/
S1310WHn/
S1313WHn) Adjusts the color range of the HDMI image data to prevent 
color display error.
•Auto: Automatically adjusts the color range by 
information from the player.
•Limited Range: Processes the input image as limited color 
range data.
•Full Range: Processes the input image as full color range 
data.
HDMI Scan Info 
(S1210Hn/
S1213Hn/
T212DT/XS-...

25
English
SecuritySecurity
This projector provides a usef
ul security function for the 
administrator to manage the projector.
Press   to change the Security setting. If the security 
function is enabled, your  must enter Administrator 
Password first before changing the security setting.
The factory default of Administrator Password is 
1234.
•Select On to enable the se curity function. You have to 
enter password depending on the Security Mode. 
Please refer to User Password section for details.
•If...

26
English
Administrator Password
You can enter Administrator Password when the Enter 
Administrator Password or Enter Password dialogue box 
displays.
•Press   to change Administrator Password.
•The factory default of Administrator Password is 
1234.
If you forget your administrator password, do the following 
to retrieve the administrator password:
•Enter the unique 6-digit Universal Password which is 
printed on the Security Card that came with your 
projector. This unique password will be accepted by...

27
English
LAN Setting
(for S1210Hn/
S1213Hn/
T212DT/XS-
X13HG/
S1310WHn/
S1313WHn)To connect your projector to the network:
1 Take a RJ45 cable and connect one end to the LAN input 
jack of the projector and the other end to the RJ45 port.
2 Enter the LAN Setting menu. The Enter Administrator 
Password dialogue box is displayed.
3 Enter Administrator Password. The next level menu 
is displayed.
The factory default of Administrator Password is 
1234. You can change it in the Setting > Security >...

28
English
Note: HDMI Color Range is only available when the input signal is HDMI.
About LAN Setting (for S1210H n/S1213Hn/T212DT/XS-X13HG/S1310WHn/
S1313WHn)
Note 1 :  An overview of the re mote network operation page
Note 2 :  An overview of the Tools page
Note 3:  The Info page shows the projector information and status.
To switch 
input signals, 
click your 
desired 
signal.These buttons 
function the 
same as those 
on the OSD 
menus, 
projector 
control panel, 
or remote 
control.
See Note 2 and...

29
EnglishManagement
ECO ModeChoose On to dim the projector lamp, which will also 
lower the power consumption, reduce noise, and extend 
the lamp life. Choose Off to return to the normal mode.
High AltitudeChoose On to turn on the High Altitude mode. When 
this function is turned on, the projector fans operate at full 
speed continuously to cool down the projector’s 
temperature.
Turn Off Mode
•Instant Off: Enables you to turn off the projector 
immediately without fan cooling process by pressing 
the...

30
English
Audio
Timer
Volume•Press   to decrease the volume.
•Press   to increase the volume.
Mute
•Choose On to turn mute on.
•Choose Off to turn mute off.
Timer LocationSets the location of the timer on the screen.
Timer Start (or 
Stop)Press   to start or stop the timer.
Timer Period 
(Minutes)Press   to adjust the timer period.
Timer VolumeSelect this function to adjust the notification volume 
when the timer function is enabled and time is up.
Timer Display
Press   to choose a timer display mode....