Acer Xs X13 Users Guide

1
EnglishIntroduction
Product Features
This product is a single-chip DLP® projector, including the following 
outstanding features:
•DLP® technology
•S1110/T200/XS-S10: Native 800 x 600 SVGA resolution
Auto / 4:3 / 16:9 aspect ratio supported
S1210/T210/XS-X10/S1210Hn/S1213/T212/XS-X13/S1213Hn/T212DT/XS-
X13HG: 
Native 1024 x 768 XGA resolution
Auto / 4:3 / 16:9 aspect ratio supported
S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn: Native 1280 x 800 
WXGA resolution
Auto/ Full / 4:3 /16:9 / L.Box aspect...

2
English
Package Overview
This projector comes with all the items shown below. Check to make sure you 
have them all. Contact your dealer immediately if any thing is missing.
Projector with lens cap Power cord VGA cable
Security card User’s guide (CD-ROM) Remote control
Quick start guide Battery x 2 Dust filter
(Optional)
Acer ProjectorSecurity Card
  
Acer ProjectorThis CD contains

® Reader®www.acer.com
PgDn PgUp
SD/USB A HDMI/DVI LAN/WiFi USB BENTERBACK
Quick Start Guide
Downloaded From...

3
EnglishProjector Overview
Projector Outlook
Front / upper side
Rear side
#Description#Description
1 Control panel 5 Power key and Power indicator LED
2 Projection lens 6 Focus ring
3 Elevator button 7 Remote control receiver
4Lens cap
#Description#Description
1 USB connector 8 Tilt adjusting wheel
2 Monitor loop-through output connector 9 Kensington™ lock port
3 PC analog signal/HDTV/component 
video input connector10 LAN (RJ45 port for 10/100M 
Ethernet)
4 RS232 connector 11 Remote control receiver
5...

4
English
Control Panel
#FunctionDescription
1 LAMP Lamp Indicator LED
2 Power key and Power 
indicator LEDRefer to the Turning the Projector On/
Off section.
3 Keystone Adjusts image distortion caused by tilting 
projection (±40 degrees).
4MENU
•Launches the Onscreen Display (OSD) 
menu, returns to the previous step for 
the OSD menu operation or exits the 
OSD menu.
•Confirms your selection of items.
5 HIDE Hides the screen picture.
6 TEMP Temp Indicator LED
7 SOURCE Chooses RGB, component video,...

5
EnglishRemote Control Layout
#FunctionDescription
1 POWER Refer to the Turning the Projector On/Off section.
2 ASPECT RATIO To choose the desired aspect ratio.
3 ZOOM Zooms the projector display in or out.
4 RESYNC Automatically synchronizes the projector to the input 
source.
5 Keystone Adjusts image distortion caused by tilting projection 
(±40 degrees).
Four 
directional 
select keysSelects items or makes adjustments to your selection.
6 Keypad 0~9 Press 0~9 to input a password in the Setting >...

6
English
13 FREEZE To pause the screen image.
14 HIDE Press HIDE to hide screen image; press again to 
display the image.
15 SOURCE Chooses RGB, component video, S-Video, composite 
video or HDTV source.
16 MENU
•Launches the Onscreen Display (OSD) menu, 
returns to the previous step for the OSD menu 
operation or exits the OSD menu.
•Confirms your selection of items.
17 PgUp/PgDn For computer mode only. Use this button to select the 
next or previous page. This function is only available 
when...

7
EnglishGetting Started
Connecting the Projector
•S1110/T200/XS-S10/S1210/T210/XS-X10/S1310W/T220/XS-W10
Note: To ensure the projector works well with your computer, 
please make sure the timing of the display mode is compatible 
with the projector.
#Description#Description
1Power cord 6S-Video cable
2 VGA cable 7 RS232 cable
3 VGA to component video/HDTV 
adapter8 USB cable
4 Composite video cable 9 3 RCA component cable
5 Audio cable
RS232
RS232
RB G RB G
HDTV adapterD-Sub
D-Sub
78
D-Sub
D-Sub
2
5
5...

8
English
•S1210Hn/S1213/T212/XS-X13/S1213Hn/T212DT/XS-X13HG/S1313W/
S1310WHn/S1313WHn
Note: To ensure the projector works well with your computer, 
please make sure the timing of the display mode is compatible 
with the projector.
#Description#Description
1 Power cord 7 RS232 cable
2 VGA cable 8 USB cable
3 VGA to component video/HDTV 
adapter9 3 RCA component cable
4 Composite video cable 10 RJ45 cable
5 Audio cable 11 HDMI cable
6S-Video cable
AUDIO-R
AUDIO-LAUDIO
 IN  1
AUDIO  
IN  2
AUDIO
OUT VGA IN...

9
EnglishTurning the Projector On/Off 
Turning On the Projector
1 Remove the lens cap.
2 Ensure that the power cord and signal cable are securely connected. 
The Power LED will light red.
3 Turn on the projector by pressing   (POWER) on the control panel or 
remote control, and the Power indicator LED will turn blue.
4 Turn on your source (computer, notebook, video player, etc.). The 
projector will detect your source automatically.
• If the screen displays No Signal, please make sure the signal cables...

10
English
Turning Off the Projector
1 To turn the projector off, press the power button. This message 
appears:
Please press the power button again to complete the shutdown process.
Press the power button again.
2 The LED power indicator will turn solid red to indicate standby mode.
3 It is now safe to unplug the power cord.
When Instant Resume is selected:
1 The LED power indicator will turn RED and blink rapidly after the 
projector is turned off, and the fan(s) will continue to operate for 
about 2...