Acer Xs S10 Users Guide

							11
EnglishAdjusting the Projected Image
Adjusting the Height of the Projected Image
The projector is equipped with an elevator foot for adjusting the image height.
To raise the image:
1 Press the elevator button.
2 Raise the image to the desired height angle, then release the button 
to lock the elevator foot into position.
3 Use Tilt adjusting wheel to fine-tune the display angle.
To lower the image:
1 Press the elevator button.
2 Lower the image to the desired height angle, then release the button 
to lock the elevator foot into position.
3 Use Tilt adjusting wheel to fine-tune the display angle.
32
1
Tilt adjusting wheelElevator 
button
Elevator foot
Downloaded From projector-manual.com Acer Manuals 
						

							12
English
How to Optimize Image Size and Distance
Consult the table below to find the optimal image sizes achievable when the 
projector is positioned at a desired distance from the screen.
•S1110/T200/XS-S10/S1210/T210/XS-X10/S1210Hn/S1213/T212/XS-X13/
S1213Hn/T212DT/XS-X13HG
If the projector is 1 m from the screen, good image quality is possible for image 
sizes around 81.
Note: Remind as below figure, the space of 160 cm height is 
required when located at 1 m distance.
Desired
Distance 
(m)
< A >Screen Size
Diagonal 
(inch)
< B >W (cm) x H (cm)From base to 
top of image 
(cm) 
< C >
0.5 40 82 x 61 80
0.6 48 98 x 74 96
0.7 56 115 x 86 112
0.8 65 131 x 98 128
0.9 73 148 x 111 144
181164 x 123160
1.5 121 246 x 184 240
2 161 328 x 246 320
2.5 202 410 x 307 400
3 242 492 x 369  480
3.7 299 607 x 455 591
Zoom Ratio: 1.0 x
CA
B
1 m
Desired distance
Height:
160 cm
From 
base to 
top of 
image
81
Downloaded From projector-manual.com Acer Manuals 
						

							13
English•S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn
If the projector is 4 m from the screen, good image quality is possible for image 
sizes around 379.
Note: Remind as below figure, the space of 510 cm height is 
required when located at 2 m distance.
Desired
Distance 
(m)
< A >Screen Size
Diagonal 
(inch)
< B >W (cm) x H (cm)From base to 
top of image 
(cm) 
< C >
0.5 47 102 x 64 70
1 95 204 x 128 140
0.5 142 306 x 191 210
2 189 408 x 255 281
2.5 237 510 x 319 351
3 284 612 x 383 421
3.5 332 714 x 446 491
4379816 x 510561
4.5 426 918 x 574 631
5 474 1020 x 638  702
6 568 1224 x 765 842
Zoom Ratio: 1.0 x
CA
B
4 m
Desired distance
Height:
510 cm
From 
base to 
top of 
image
379
Downloaded From projector-manual.com Acer Manuals 
						

							14
English
How to Get a Preferred Image Size by Adjusting 
Distance and Zoom
The table below shows how to achieve a desired image size by adjusting either 
the position or the zoom ring.
•S1110/T200/XS-S10/S1210/T210/XS-X10/S1210Hn/S1213/T212/XS-X13/
S1213Hn/T212DT/XS-X13HG
To obtain an image size of 50 set the projector at a distance 0.6 m from the 
screen.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
< A >W (cm) x H (cm)Max zoom
< B >Min zoom
< C >From base to top of 
image < D >
30 61 x 46 0.4 0.4 59
40 81 x 61 0.5 0.5 79
50102 x 760.60.699
60 122 x 91 0.7 0.7 119
70 142 x 107 0.9 0.9 139
80 163 x 122 1.0 1.0 158
90 183 x 137 1.1 1.1 178
100 203 x 152 1.2 1.2 198
120 244 x 183 1.5 1.5 238
150 305 x 229 1.9 1.9 297
180 366 x 274 2.2 2.2 357
200 406 x 305 2.5 2.5 396
250 508 x 381 3.1 3.1 495
300 610 x 457 3.7 3.7 594
Zoom Ratio: 1.0 x
D
B&C
A
Desired distance
Height:
99 cm
From 
base to 
top of 
image
50
Desired
image size
0.6 m
Downloaded From projector-manual.com Acer Manuals 
						

							15
English
•S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn
To obtain an image size of 50 set the projector at a distance 0.5 m from the 
screen.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
< A >W (cm) x H (cm)Max zoom
< B >Min zoom
< C >From base to top of 
image < D >
30 65 x 40 0.3 0.3 44
40 86 x 54 0.4 0.4 59
50108 x 670.50.574
60 129 x 81 0.6 0.6 89
70 151 x 94 0.7 0.7 104
80 172 x 108 0.8 0.8 118
90 194 x 121 0.9 0.9 133
100 215 x 135 1.1 1.1 148
120 258 x 162 1.3 1.3 178
150 323 x 202 1.6 1.6 222
180 388 x 242 1.9 1.9 267
200 431 x 269 2.1 2.1 296
250 538 x 337 2.6 2.6 370
300 646 x 404 3.2 3.2 444
Zoom Ratio: 1.0 x
D
B&C
A
Desired distance
Height:
74 cm
From 
base to 
top of 
image
50
Desired
image size
0.5 m
Downloaded From projector-manual.com Acer Manuals 
						

							16
English
User Controls
Installation Menu
The Installation menu provides an onscreen display (OSD) for projector 
installation and ma intenance. Use the OSD only when the message No 
signal input is disp layed on the screen. 
1 Turn on the projector by pressing   (POWER) on the control panel or  remote control.
2 Press MENU on the control panel  or remote control to launch the 
OSD for projector install ation and maintenance.
3 The background pattern acts as a guide to adjusting the calibration  and alignment settings, such as sc reen size and distance, focus and 
more.
4 The Installation menu incl udes the following options:
• Projection method
• Menu location
• Keystone settings
• Language settings
• Reset to factory default functions
Use the up and down arrow keys to select an option, the left and right arrow keys to 
adjust selected option settings, and the right arrow key to enter a submenu for 
feature setting. The new settings will be  saved automatically upon exiting the menu.
5 Press MENU anytime to exit the menu and return to the Acer 
welcome screen.
(S1110/T200/XS-S10/S1210/T210/XS-
X10/S1213/T212/XS-X13/S1310W/
T220/XS-W10/S1313W) (S1210Hn/S1213Hn/T212DT/
XS-X13HG/S1310WHn
/
S1313WHn)
 
 
 
Downloaded From projector-manual.com Acer Manuals 
						

							17
EnglishAcer Empowering Technology
Empowering KeyAcer Empowering Key provides three 
Acer unique functions: Acer eView 
Management, Acer eTimer 
Management, and Acer ePower 
Management. Press   for more 
than one second to launch the 
Onscreen Display main menu to modify 
its function.
Acer eView ManagementPress   to launch Acer eView 
Management.
Acer eView Management is for 
display mode selection. Please refer to 
the Onscreen Display (OSD) Menus 
section for more details.
Acer eTimer ManagementPress   to launch Acer eTimer 
Management.
Acer eTimer Management provides 
the reminding function for 
presentation time control. Please refer 
to the Onscreen Display (OSD) Menus 
section for more details.
Acer ePower ManagementPress   to launch Acer ePower 
Management.
Acer ePower Managementprovides 
you one shortcut to save the lamp and 
projector’s life. Please refer to the 
Onscreen Display (OSD) Menus 
section for more details.
Downloaded From projector-manual.com Acer Manuals 
						

							18
English
Onscreen Display (OSD) Menus
The projector has multilingual Onscreen Display (OSD) menus that allow 
you to make image adjustments and change a variety of settings.
Using the OSD menus
•To open the OSD menu, press MENU on the control panel or remote 
control.
•When the OSD is displayed, use   to select an item in the main menu. 
After selecting the desired main menu item, press   to enter a submenu 
for feature setting.
•Use   to select the desired item and adjust the settings by using 
.
•Select the next item to be adjusted in the submenu and adjust as described 
above.
•Press MENU on the control panel or remote control, the screen will 
return to the main menu.
•To exit the OSD menu, press MENU on the control panel or remote 
control again. It will close and the projector will automatically save the 
new settings.
Main menu
Submenu
Setting
Downloaded From projector-manual.com Acer Manuals 
						

							19
EnglishColor
Display ModeThere are many factory presets optimized for various types 
of images.
•Bright: For brightness optimization.
•Presentation: For meeting presentation with higher 
brightness.
•Standard: For common environment.
•Video: For playing video in a bright environment.
•Picture: For graphic picture.
•Game: For game content.
•Education: For education environment.
•User: Memorize user’s settings.
Wall ColorUse this function to choose a proper color according to the 
wall. There are several choices, including White, Light 
Yellow, Light Blue, Pink and Dark Green. It will 
compensate the color deviation due to the wall color to 
show the correct image tone.
BrightnessAdjusts the brightness of the image.
•Press   to darken the image.
•Press   to lighten the image.
ContrastControls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast 
changes the amount of black and white in the image.
•Press   to decrease the contrast.
•Press   to increase the contrast.
(S1110/T200/XS-S10/S1210/T210/
XS-X10/S1210Hn/S1310W/T220/
XS-W10/S1310WHn)(S1213/T212/XS-X13/S1213Hn/
T212DT/XS-X13HG/S1313W/
S1313WHn)
Downloaded From projector-manual.com Acer Manuals 
						

							20
English
Note: Saturation and Tint functions are not supported under computer 
mode.
Color 
TemperatureAdjusts the color temperature. At higher color 
temperatures, the screen looks colder; at lower color 
temperatures, the screen looks warmer.
DegammaEffects the representation of dark scenery. With greater 
gamma value, dark scenery will look brighter.
Color RAdjusts the red color.
Color GAdjusts the green color.
Color BAdjusts the blue color.
SaturationAdjusts a video image from black and white to fully 
saturated colors.
•Press   to decrease the amount of color in the 
image.
•Press   to increase the amount of color in the 
image.
TintAdjusts the color balance of red and green.
•Press   to increase the amount of green in the 
image.
•Press   to increase the amount of red in the image.
Dynamic Black
(S1213/T212/XS-
X13/S1213Hn/
T212DT/XS-
X13HG/S1313W/
S1313WHn)If turned on, the projector dynamically adjusts the power 
consumption of the lamp according to the brightness of 
the image being projected. When projecting darker 
images the power consumption will be reduced and the 
contrast of the image will also be enhanced.
Downloaded From projector-manual.com Acer Manuals