Acer Xb270h Users Guide

8
English
Standard timing table
1 640×480@60Hz 
2 720×480@60Hz
3 720×576@50Hz
4 800×600@60Hz
5 1024×768@60Hz
6 1280×720@60Hz
7 1280×720@50Hz
8 1920×1080@30Hz
9 1920×1080@60Hz
10 1920×1080@50Hz 
 Mode Resolution  
*Only for MHL-Model 
1VGA  640x480 60 Hz  
2MAC 640x480 66.66 Hz 
3VESA 720x400 70 Hz 
4SVGA 800x600 56 Hz 
5SVGA 800x600 60 Hz 
6XGA 1024x768 60 Hz 
7XGA 1024x768 70 Hz 
8VESA 1152x864 75 Hz 
9SXGA 1280x1024 60 Hz 
10VESA 1280x720 60 Hz 
11WXGA 1280x800 60 Hz 
12WXGA+ 1440x900 60 Hz 
13WSXGA+...

9EnglishInstallation
To install the monitor on your host system, please follow the steps below:
Steps 
1 Connect the video cable
a Make sure both the monitor and computer are switched off. 
b Connect the VGA video cable to the computer.  
c Connect the digital cable (only for dual-input models).
(1) Make sure both the monitor and computer are switched off. 
(2) Connect one end of the 24-pin DVI cable to the back of the 
monitor and the other end to the computers port.
2 Connect the power cord
Connect the...

EN-13
USER CONTROLS
Power Switch / Power LED:
To turn the monitor ON or OFF.
Lights up to indicate the power is turned ON.
Using  the Shortcut Menu
Press the function button to open the shortcut menu. The shortcut menu lets you
quickly select the most commonly accessed settings.
Empowering:Press the Empowering Key to open the Acer eColor Management OSD and access
the scenario modes.
AUTOAuto Adjust:
Press this button to activate the Auto Adjustment function. The Auto Adjustment
function is used to set...

EN-14
Main
Menu
icon
Sub
Menu
icon
Sub
Menu
item
Description
N/AUser modeUser defined. Settings can be fine-tuned to
suit any situation
N/A 
N/AStandard
mode
Default Setting. Reflects native display
capability
N/AGrahpic
mode
Enhances colors and emphasize fine detail. 
Pictures and photographs appear in vibrant
colors with sharp detail.
N/AMovie
mode
Displays scenes in clearest detail.  Presents
great visuals, even in unsuitably-lit
environments.
Acer eColor Management 
Operation instructions 
Step 1:...

EN-15
Adjusting the OSD settings
-------------------------------------------------------------------- 
Note: The following content is for general reference only. Actual 
product specifications may vary.
The OSD can be used for adjusting the settings of your LCD Monitor.
Press the MENU key to open the OSD. You can use the OSD to adjust the
picture quality, OSD position and general settings. For advanced settings,
please refer to following page: 
Adjusting the picture quality 
1Press the MENU key to bring...

EN-16
Adjusting the OSD position
1Press the MENU key to bring up the OSD.
2Using the directional keys, select  OSD from the on screen display.
Then navigate to the feature you wish to adjust.
jown·oM()(S4romSYMnuM·Yon*torDVomSYMnuM·s 

EN-17
Adjusting the setting 
1Press the MENU key to bring up the OSD.
2Using the  /  keys, select  Setting from the OSD. Then navigate to
the feature you wish to adjust.
3The Setting menu can be used to adjust the screen Menu Language and
other important settings.
4Select Power-off USB charge ON/OFF to enable/disable Power-off USB 
charge function. 
5
Select NVIDIA ® 3D LightBoostTM to adjust 3D® LightBoostTM level.
 

EN-18
Product information 
1Press the MENU key to bring up the OSD.
2Using the   /   keys, select   Information from the OSD. Then the
basic information of LCD monitor will show up for current input.
1920 x 1080
Information
H:65KHz   V:60Hz
VGA Input
S/N:ETL5309 1326350380B3742
 

15
EnglishTroubleshooting
Before sending your LCD monitor for servicing, please check the 
troubleshooting list below to see if you can self-diagnose the problem.
VGA mode
ProblemLED statusRemedy
No picture visible Blue Using the OSD, adjust brightness and  contrast to maximum or reset to their 
default settings.
Off Check the power switch.
Check if the power cord is properly 
connected to the monitor.
Amber Check if the video signal cable is  properly connected at the back of 
monitor.
Check if the...

16
English
DVI/DP/HDMI/MHL mode
ProblemLED statusRemedy
No picture visible Blue Using the OSD, adjust brightness and 
contrast to maximum or reset to their  
default settings.
Off Check the power switch.
Check if the AC power cord is properly  connected to the monitor.
Amber Check if the video signal cable is properly connected at the back of  
monitor. 
Check that the computer system is  
switched on and in power saving/ standby mode.