Acer Xb270h Users Guide
Have a look at the manual Acer Xb270h Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
8 English Standard timing table 1 640×480@60Hz 2 720×480@60Hz 3 720×576@50Hz 4 800×600@60Hz 5 1024×768@60Hz 6 1280×720@60Hz 7 1280×720@50Hz 8 1920×1080@30Hz 9 1920×1080@60Hz 10 1920×1080@50Hz Mode Resolution *Only for MHL-Model 1VGA 640x480 60 Hz 2MAC 640x480 66.66 Hz 3VESA 720x400 70 Hz 4SVGA 800x600 56 Hz 5SVGA 800x600 60 Hz 6XGA 1024x768 60 Hz 7XGA 1024x768 70 Hz 8VESA 1152x864 75 Hz 9SXGA 1280x1024 60 Hz 10VESA 1280x720 60 Hz 11WXGA 1280x800 60 Hz 12WXGA+ 1440x900 60 Hz 13WSXGA+ 1680x1050 60 Hz 14UXGA 1920x1080 60 Hz 15UXGA 1920 1080 120Hz 16UXGA 1920x1080 144 Hz x
9EnglishInstallation To install the monitor on your host system, please follow the steps below: Steps 1 Connect the video cable a Make sure both the monitor and computer are switched off. b Connect the VGA video cable to the computer. c Connect the digital cable (only for dual-input models). (1) Make sure both the monitor and computer are switched off. (2) Connect one end of the 24-pin DVI cable to the back of the monitor and the other end to the computers port. 2 Connect the power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. dConnect the digital cable (only for DP models). (1) Make sure both the monitor and computer are switched off. (2) Connect one end of the 20-pin DP cable to the back of the monitor and the other end to the computers port. Optional:Connect the audio input socket(AUDIO IN) of the LCD monitor and the line-out port on the computer with the audio cable. Connect the Connect the USB Cable(Optional) USB 3.0 cable to port for fast charge. Connect the USB 3.0 cable to port. 3 4 5 6 Connect HDMI Cable (Only for HDMI-Input Model)(Optional) a. Make sure both the monitor and computer are powered-OFF. b. Connect t heHDMIcable tocomputer. Or connect MHL cableOr connect MHL cable(Only for MHL-Input Model)(Optional) to the portable device USB USB USB3.0 port-supporting fast charge USB3.0 port 2 e
EN-13
USER CONTROLS
Power Switch / Power LED:
To turn the monitor ON or OFF.
Lights up to indicate the power is turned ON.
Using the Shortcut Menu
Press the function button to open the shortcut menu. The shortcut menu lets you
quickly select the most commonly accessed settings.
Empowering:Press the Empowering Key to open the Acer eColor Management OSD and access
the scenario modes.
AUTOAuto Adjust:
Press this button to activate the Auto Adjustment function. The Auto Adjustment
function is used to set the HPos, VPos, Clock and Focus.
MENUOSD functions
Press this botton to activate the OSD menu.
INPUTInput Key
Use Input key to select from different video sources that may be connected to
your monitor.
(a) VGA input (b) DVI input (c) DP input
As you cycle through the sources you will see the following messages on right top
side of screen to indicate currently selected input source. It may take 1 or 2
seconds for the image to appear.
VGA or DVI or DP
If either VGA or DVI input is selected ,but the VGA and DVI cables are not con-
nected, a floating dialog box indicates:
“No Cable Connect” or “No Signal”
(d) HDMI(MHL) input
EN-14 Main Menu icon Sub Menu icon Sub Menu item Description N/AUser modeUser defined. Settings can be fine-tuned to suit any situation N/A N/AStandard mode Default Setting. Reflects native display capability N/AGrahpic mode Enhances colors and emphasize fine detail. Pictures and photographs appear in vibrant colors with sharp detail. N/AMovie mode Displays scenes in clearest detail. Presents great visuals, even in unsuitably-lit environments. Acer eColor Management Operation instructions Step 1: Press “ “ Key to open the Acer eColor Management OSD and access the scenario modes Step 2:Press “ “ or “ ” to select the mode Features and Benefits Step 3:Press “ AUTO “ Key to confirm the mode and exit the eColor menu. modeECOAdjusts thesettings to reduce power consumption.
EN-15 Adjusting the OSD settings -------------------------------------------------------------------- Note: The following content is for general reference only. Actual product specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. For advanced settings, please refer to following page: Adjusting the picture quality 1Press the MENU key to bring up the OSD. 2Using the / keys, select Picture from the OSD. Then navigate to the picture element you wish to adjust. 3Use the / keys to adjust the sliding scales. 4The Picture menu can be used to adjust the current Brightness, Contrast, Colour Temp, Auto Config and other image-related qualities. jown·oM()(S4romSYMnuM·Yon*torDVomSYMnuM·s
EN-16 Adjusting the OSD position 1Press the MENU key to bring up the OSD. 2Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust. jown·oM()(S4romSYMnuM·Yon*torDVomSYMnuM·s
EN-17 Adjusting the setting 1Press the MENU key to bring up the OSD. 2Using the / keys, select Setting from the OSD. Then navigate to the feature you wish to adjust. 3The Setting menu can be used to adjust the screen Menu Language and other important settings. 4Select Power-off USB charge ON/OFF to enable/disable Power-off USB charge function. 5 Select NVIDIA ® 3D LightBoostTM to adjust 3D® LightBoostTM level.
EN-18 Product information 1Press the MENU key to bring up the OSD. 2Using the / keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. 1920 x 1080 Information H:65KHz V:60Hz VGA Input S/N:ETL5309 1326350380B3742
15 EnglishTroubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. VGA mode ProblemLED statusRemedy No picture visible Blue Using the OSD, adjust brightness and contrast to maximum or reset to their default settings. Off Check the power switch. Check if the power cord is properly connected to the monitor. Amber Check if the video signal cable is properly connected at the back of monitor. Check if the computer system is switched on and in power saving/ standby mode. Unstable picture Check if the specification of graphics adapter and monitor is in compliance which may be causing the input signal frequency mismatch. Abnormal picture Image is missing, off-center, too large or too small on the screen.Using the OSD, adjust focus, clock, H- position and V-position with non- standard signals. Check the display setting on your system. In case of a missing image, please select another resolution or vertical refresh rate. Wait for a few seconds after adjusting the size of the image before changing or disconnecting the signal cable or switching off the monitor.
16 English DVI/DP/HDMI/MHL mode ProblemLED statusRemedy No picture visible Blue Using the OSD, adjust brightness and contrast to maximum or reset to their default settings. Off Check the power switch. Check if the AC power cord is properly connected to the monitor. Amber Check if the video signal cable is properly connected at the back of monitor. Check that the computer system is switched on and in power saving/ standby mode.