Acer TravelMate 7720 7320 User Manual
Here you can view all the pages of manual Acer TravelMate 7720 7320 User Manual. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 71
Chapter 361 External Module Disassembly Process External Modules Disassembly Flowchart The flowchart below gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order. Screw List ScrewPart No. A M2.5 x L6 86.00E33.736 B M2 x L4 86.00A02.140 C M2 x L4 86.9A552.4R0 G M3 x L4...
Page 72
62Chapter 3 Removing the Battery Pack 1.Turn base unit over. 2.Slide the battery lock/unlock latch to the unlock position. 3.Slide and hold the battery release latch to the release position, then remove the battery from the main unit. SG_Tangiz.book Page 62 Tuesday, July 10, 2007 11:01 AM
Page 73
Chapter 363 Removing the SD dummy card 1.Push the SD dummy card all the way in to eject it (1, 2). 2.Pull it out from the slot (2). Removing the PC and ExpressCard dummy cards 1.Press the eject button to pop out the button. SG_Tangiz.book Page 63 Tuesday, July 10, 2007 11:01 AM
Page 74
64Chapter 3 2.Press it again (1) to pop out the PC dummy card (2). Remove the PC dummy card from the slot. 3.Push the ExpressCard dummy card all the way in to eject it. 4.Pull it out from the slot. Removing the Lower Cover 1.See “Removing the Battery Pack” on page 62. SG_Tangiz.book Page 64 Tuesday, July 10, 2007 11:01 AM
Page 75
Chapter 365 2.See “Removing the SD dummy card” on page 63. 3.See “Removing the PC and ExpressCard dummy cards” on page 63. 4.Loosen the nine screws (B) on the lower cover. 5.Use a plastic screw driver to carefully pry open the lower cover. 6.Remove the lower cover from the lower case. Removing the Secondary HDD Cover 1.See “Removing the Battery Pack” on page 62. 2.See “Removing the SD dummy card” on page 63. 3.See “Removing the PC and ExpressCard dummy cards” on page 63. 4.See “Removing the Lower...
Page 76
66Chapter 3 5.Loosen the two screws (B) from the secondary HDD cover. 6.Use a plastic screw driver to pry open the secondary HDD cover. 7.Remove the secondary HDD cover from the lower case. Removing the Secondary HDD Bracket and Connector 1.See “Removing the Battery Pack” on page 62. 2.See “Removing the Secondary HDD Cover” on page 65. StepSize (Quantity)ColorTo r q u e 1~2 M2 x L4 (2) Black 1.6 kgf-cm SG_Tangiz.book Page 66 Tuesday, July 10, 2007 11:01 AM
Page 77
Chapter 367 3.Remove the HDD Bracket from the slot. 4.Disconnect the SATA power connector. 5.Disconnect the SATA connector. 6.Remove the aluminium tape together with the connector. SG_Tangiz.book Page 67 Tuesday, July 10, 2007 11:01 AM
Page 78
68Chapter 3 Removing the DIMM 1.See “Removing the Battery Pack” on page 62. 2.See “Removing the SD dummy card” on page 63. 3.See “Removing the PC and ExpressCard dummy cards” on page 63. 4.See “Removing the Lower Cover” on page 64. 5.See “Removing the Secondary HDD Cover” on page 65. 6.Push out the latches on both sides of the DIMM socket to release the DIMM. 7.Remove the DIMM module. Removing the WLAN Board Modules 1.See “Removing the Battery Pack” on page 62. 2.See “Removing the SD dummy card” on...
Page 79
Chapter 369 6.Disconnect the antenna cables from the WLAN board. 7.Move the antenna away from the WLAN board and remove the two screws (C) on the WLAN board to release the WLAN board. 8.Detach the WLAN board from the WLAN socket. NOTE: When attaching the antenna back to the WLAN board, make sure the cable are arranged properly. Removing the Hard Disk Drive Module 1.See “Removing the Battery Pack” on page 62. 2.See “Removing the SD dummy card” on page 63. 3.See “Removing the PC and ExpressCard...
Page 80
70Chapter 3 5.Disconnect the hard disk module from the connector by pulling on the mylar tab on the hard disk module. 6.Remove the hard disk module. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it. 7.Remove the four screws (G) as shown. 8.Remove the hard disk drive from the bracket. Removing the Optical Drive Module 1.See “Removing the Battery Pack” on page 62. StepSize (Quantity)ColorTo r q u e 1~4 M3 x L4 (4) Silver 1.8 kgf-cm SG_Tangiz.book Page...