Acer Travelmate 630 Service Guide

Chapter 251
The screen below appears if you select Multi Test.
Specify the desired number of tests and press 
e
ee e.
After you specify the number of tests to perform, the screen shows a list of test items (see below).
Move the highlight bar from one item to another. Press Space to enable or disable the item. Press 
e
ee e to 
view the available options of each selected item. Press 
|
|| | to close the submenu.
The right corner screen information gives you the available function keys and the specified...

52Chapter 2 

Chapter 353
This chapter contains step-by-step procedures on how to disassemble the notebook computer for 
maintenance and troubleshooting.
To disassemble the computer, you need the following tools:
!Wrist grounding strap and conductive mat for preventing electrostatic discharge
!Flat screw driver
!Phillips screw driver
!Plastic Poker
!Hex screw driver
!Plastic flat screw driver
NOTE: The screws for the different components vary in size. During the disassembly process, group the 
screws with the...

54Chapter 3
General Information
Before You Begin
Before proceeding with the disassembly procedure, make sure that you do the following:
1.
Turn off the power to the system and all peripherals.
2.
Unplug the AC adapter and all power and signal cables from the system.
3.
Remove the battery pack. 

Chapter 355
Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence 
and instructs you on the components that need to be removed during servicing. For example, if you want to 
remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in 
that order.
START
Battery
HDD Cover
HDD Module
HDD
DIMM Cover
Modem BoardDIMM
HDD Bracket
Cx1
Hx1Ax2
Middle CoverKeyboard
Coaxial CableRTC...

56Chapter 3
Screw List
ItemDescription
A Screw M2 X L4 (Black)
B Screw M2.5 X L6 (Black)
C Screw M2.5 X L8 ((Black)
D Screw M2 X L3.5 (Silver)
E Screw M2 X L5 (Black)
F Screw DIMM Cover Steel Nagana-1 (Black)
G Screw M2 X L3 (Silver)
H Screw M3x4 (Silver)
I CD-ROM SPECIAL SCREW
J HEX SCREW
K CPU HEAT SINK SPECIAL SCREW
L Screw M2x10 (Silver)
M Screw M2.5x5 (Silver)
N Screw M2x4 (Black)
O Screw M2.5x4 (Black)
LCD Module
LCD Bezel
Inverter BoardLCD HIngesLCD Latch
Ox2Bx4
LCD
LCD Brackets
LCD Panel
Gx6Dx4...

Chapter 357
Removing the Battery Pack
1.
Push the battery release button inward.
2.
Slide the battery pack out from the main unit.
  

58Chapter 3
Removing the External DIMM Module
1.
See “Removing the Battery Pack” on page 57
2.
Remove the 2 screws on the DIMM cover, then remove the DIMM cover from the lower case.
3.
Push out the latches on both sides of the DIMM socket and then remove the DIMM module.
   

Chapter 359
Removing the External Modem Combo Card
1.
See “Removing the Battery Pack” on page 57.
2.
Remove the 2 screws on the DIMM cover and remove the DIMM cover from the lower case.
3.
Remove the 2 screws on the modem board and remove the modem board from the main board.  
Disconnect the modem power from the modem board. 

60Chapter 3
Removing the CD-ROM/DVD-ROM Module
1.
See “Removing the Battery Pack” on page 57
2.
Push the CD-ROM module release button inward.
3.
Slide the CD-ROM module out from the main unit.