Acer Travelmate 5330 Service Guide
Here you can view all the pages of manual Acer Travelmate 5330 Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 91
Chapter 385 18.Remove the left and right speaker modules from the upper case. Removing the Launch Board 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the SD dummy card” on page 55. 3.See “Removing the PC and ExpressCard dummy cards” on page 56. 4.See “Removing the Lower Cover” on page 57. 5.See “Removing the DIMM” on page 58. 6.See “Removing the WLAN Board Modules” on page 59. 7.See “Removing the Hard Disk Drive Module” on page 61. 8.See “Removing the Optical Drive Module” on page 62....
Page 92
86Chapter 3 17.Remove the one screw (1 x A) securing the launch board module. 18.Remove the launch board module from the upper case. Removing the Fingerprint and Touchpad Module 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the SD dummy card” on page 55. 3.See “Removing the PC and ExpressCard dummy cards” on page 56. 4.See “Removing the Lower Cover” on page 57. 5.See “Removing the DIMM” on page 58. 6.See “Removing the WLAN Board Modules” on page 59. 7.See “Removing the Hard Disk Drive...
Page 93
Chapter 387 14.See “Removing the VGA Board (Discrete Model only)” on page 73. 15.See “Removing the LCD Module” on page 74. 16.See “Separating the Upper Case from the Lower Case” on page 76. 17.Disconnect the touchpad cable from the touchpad board. 18.Disconnect the fingerprint cable from the fingerprint board.
Page 94
88Chapter 3 19.Remove the three screws (2 x F, 1 x A) securing the bracket to the upper case. 20.Remove the touchpad bracket. StepSize (Quantity)ColorTo r q u e 1~2 M2 x L3 (2) Silver 1.6 kgf-cm 3 M2 x L3 (2) Silver 1.6 kgf-cm
Page 95
Chapter 389 21.Remove the fingerprint board module. 22.Carefully pry loose and remove the touch pad board. WARNING:The touchpad board is glued to the upper case, only remove the touchpad board if it is defective. Removing the Modem Board 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the SD dummy card” on page 55.
Page 96
90Chapter 3 3.See “Removing the PC and ExpressCard dummy cards” on page 56. 4.See “Removing the Lower Cover” on page 57. 5.See “Removing the DIMM” on page 58. 6.See “Removing the WLAN Board Modules” on page 59. 7.See “Removing the Hard Disk Drive Module” on page 61. 8.See “Removing the Optical Drive Module” on page 62. 9.See “Removing the Middle Cover” on page 66. 10.See “Removing the Keyboard” on page 69. 11 .See “Removing the Heatsink Fan Module” on page 70. 12.See “Removing the CPU and VGA Heatsink...
Page 97
Chapter 391 19.Disconnect the cable from the modem board. Removing the USB Board Module 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the SD dummy card” on page 55. 3.See “Removing the PC and ExpressCard dummy cards” on page 56. 4.See “Removing the Lower Cover” on page 57. 5.See “Removing the DIMM” on page 58. 6.See “Removing the WLAN Board Modules” on page 59. 7.See “Removing the Hard Disk Drive Module” on page 61. 8.See “Removing the Optical Drive Module” on page 62. 9.See “Removing the...
Page 98
92Chapter 3 17.Remove the one screw (B) securing the USB board to the lower case. 18.Lift the USB board and disconnect the cable from USBCN1 on the USB board. Removing the Main Board 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the SD dummy card” on page 55. 3.See “Removing the PC and ExpressCard dummy cards” on page 56. 4.See “Removing the Lower Cover” on page 57. 5.See “Removing the DIMM” on page 58. 6.See “Removing the WLAN Board Modules” on page 59. 7.See “Removing the Hard Disk...
Page 99
Chapter 393 14.See “Removing the VGA Board (Discrete Model only)” on page 73. 15.See “Removing the LCD Module” on page 74. 16.See “Separating the Upper Case from the Lower Case” on page 76. 17.See “Removing the Modem Board” on page 85. 18.See “Removing the USB Board Module” on page 87. 19.Disconnect the Bluetooth cable from BLUE1 on the main board. 20.Disconnect the DC cable from the DC1 connector on the main board.
Page 100
94Chapter 3 21.Remove the three screws (B) securing the main board in place. 22.Carefully remove the main board. StepSize (Quantity)ColorTo r q u e 1~3 M2 x L4 (3) Silver 1.6 kgf-cm