Acer Travelmate 4530 Service Guide

Chapter 381
6.Remove the two securing screws from the Mainboard.
 
7.Lift the mainboard to expose the DC-IN jack and USB cable.
8.Remove the DC-IN jack and USB cable as shown.
StepSizeQuantityScrew Type
Mainboard M2.5*9 (NL)
Green Callout1
Mainboard M2.5*3 (NL)
Red Callout1 

82Chapter 3
9.Continue to lift the mainboard and remove from the lower cover. 

Chapter 383
Removing the RJ-11 Port
1.See “Removing the Upper Cover” on page 68.
2.See “Removing the Right Speaker Module” on page 76.
3.See “See “Removing the LCD Module” on page 66.” on page 80.
4.Disconnect the RJ-11 cable from the modem module.
5.Grasp the cable and remove it from the housing well.
6.If necessary, insert the tweezers in the RJ-11 jack. Grip the jack and lift to remove. 

84Chapter 3
Removing the CPU Fan
1.See “Removing the Mainboard” on page 80.
1.Disconnect the fan cable from the mainboard as shown. 
2.Remove the single captive screw to release the module.
3.Remove the fan module as shown 

Chapter 385
Removing the Thermal Module
1.See “Removing the Mainboard” on page 80.
2.See “Removing the CPU Fan” on page 84.
3.Remove the four (4) securing screws from the CPU plate.
NOTE: When replacing, ensure the screws are replaced in the order as marked on the plate.
4.Remove the module from the mainboard.
StepSizeQuantityScrew Type
CPU Thermal 
ModuleM2.5*3 4 

86Chapter 3
Removing the CPU 
1.See “Removing the Thermal Module” on page 85.
2.Using a flat screwdriver, turn the CPU socket latch counter-clockwise 180° to release the CPU.
3.Lift the CPU clear of the Mainboard. 

Chapter 387
 LCD Module Disassembly Process
LCD Module Disassembly Flowchart
Screw List
StepScrewQuantityColorPart No.
LCD Bezel M2.5*5 (NL) 4 Black MA000007YG0 
Inverter Board M2.5*5 (NL) 1 Black MA000007YG0 
Camera Module M2*3 (NL) 2 Black MA0000060G0
LCD Panel M2.5*5 (NL) 2 Black MA000007YG0 
LCD Brackets M2*3 (NL) 8 Black MA0000060G0 

88Chapter 3
Removing the LCD Bezel
1.See “Removing the LCD Module” on page 66.
2.Remove the two upper and two lower bezel screw caps. Remove the four securing screws from the LCD 
module.
 
3.Starting from the bottom, pry the bezel inwards and upwards to remove it from the LCD Module.
StepSizeQuantityScrew Type
LCD Bezel M2.5*5 (NL) 4 

Chapter 389
Removing the Inverter Board
1.See “Removing the LCD Bezel” on page 88.
2.Remove the securing screw.
3.Remove the inverter board and disconnect the left and right Inverter board cables as shown..
StepSizeQuantityScrew Type
Inverter Board M2.5*3 (NL) 1 

90Chapter 3
Removing the Camera Module
1.See “Removing the LCD Bezel” on page 88.
2.Remove the securing screw.
3.Disconnect the Camera Module cable as shown.
StepSizeQuantityScrew Type
Camera Module 
bracketM2.5*3 (NL) 1