Acer Travelmate 2470 Service Guide
Here you can view all the pages of manual Acer Travelmate 2470 Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 71
Chapter 363 This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. To disassemble the computer, you need the following tools: TWrist grounding strap and conductive mat for preventing electrostatic discharge TSmall Philips screw driver TPhilips screwdriver TPlastic flat head screw driver TTw e e z e r s NOTE: The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding...
Page 72
64Chapter 3 General Information Before You Begin Before proceeding with the disassembly procedure, make sure that you do the following: 1.Turn off the power to the system and all peripherals. 2.Unplug the AC adapter and all power and signal cables from the system. 3.Remove the battery pack.
Page 73
Chapter 365 Disassembly Procedure Flowchart The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the system board, you must first remove the keyboard, then disassemble the inside assembly frame in that order. Start Battery Middle CoverHDD CoverDIMM CoverH*2 P*1 HDD ModuleO*4 H*3 CPU Lower Case Assembly 86.9A353.3R0*2 Modem Board Memory...
Page 74
66Chapter 3 Screw List ItemDescriptionPart Number A SCW HEX NYL I#R-40/O#4-40 L5.5 34.00015.081 B SCREW MACH WAFER M2*L4 NI 86.00059.220 (PC Card slot x4) C CPU SCREW M2.5*4.3L (2.3 KG) 86.00D01.230 D CPU SCREW M2.5*4.3L (1.55 KG) 86.00D02.230 E SCREW M2.5-6 86.9A323.6R0 F SCRW M2.5*L8(NON NYLOK) 86.9A323.8R0 G SCREW M2*3 NYLON 1JMCPC-420325 86.9A352.3R0 H SCREW 86.9A352.4R0 I SCREW M2.5*4L(NYLOCK)BLACK ZN 86.9A353.4R0 J SCREW M2.5X6 86.9A353.6R0 K SRW M2.5*8L B/ZN NYLOK 700 86.9A353.8R0 L SCRW...
Page 75
Chapter 367 Removing the Battery Pack 1.Unlock the battery lock. 2.Slide the battery latch then remove the battery.
Page 76
68Chapter 3 Removing the Wireless LAN Card/the HDD Module/the Memory/the ODD Module and the LCD Module Removing the Memory and the HDD Module 1.Remove the five screws fastening the DIMM cover. 2.Detach the DIMM cover carefully. 3.Pop out the memory carefully. 4.Disconnect wireless main and auxiliary antenna from the wireless LAN card. 5.Pop out the wireless LAN card and remove it. 6.Remove the three screwss fastening the HDD cover. 7.Detach the HDD cover from the main unit. 8.Remove the four screws...
Page 77
Chapter 369 Removing the ODD Module 1.First, remove the screw fastening the ODD module as shown. 2.Push the ODD module outwards then remove it. Removing the LCD Module 1.Detach the middle cover from the main uiit carefully. 2.Disconnect the launch board FFC from the launch board. 3.Remove the middle cover (with launch board and microphone) from the main unit. 4.Disconnect the microphone cable from the launch board.
Page 78
70Chapter 3 5.Take out the microphone from the middle cover. 6.Remove the two screws fastening the launch board. 7.Then remove the launch board from the middle cover. . 8.Remove the screw holding the keyboard. 9.Turn over the keyboard as shown. 10.Disconnect the keyboard cable. 11 .Remove the keyboard from the main unit. 12.Tear off the tapes fastening the wireless antenna cable. 13.Pull the antenna set from the main unit. 14.Disconnect the LCD cable. 15.Turn over the notebook then remove two screws...
Page 79
Chapter 371 16.Remove two screws fastening the LCD hinges. 17.Then detach the LCD module from the main unit.
Page 80
72Chapter 3 Disassembling the Main Unit Separate the Main Unit Into the Upper and the Lower Case Assembly 1.Disconnect the touchpad cable and the LED FFC from the main board. 2.Remove the 15 screws on the bottom as shown. 3.Detach the upper case assembly from the lower case assembly carefully. Disassembling the Lower Case Assembly 4.Turn over the lower case assembly to the bottom side, then disconnect the fan cable. 5.Turn over the lower case assemlby to the fron side, then detach the bluetooth module....