Acer Travelmate 220 Service Guide
Have a look at the manual Acer Travelmate 220 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
62Chapter 3 9. Disconnect the microphone cable and then remove the inverter board from the LCD panel. 10. Disconnect the LCD power cable and the inverter cable from the inverter board. Removing the 14.1” TFT LCD 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Cable Cover” on page 57 6. See “Removing the LCD Module” on page 58 7. See “Removing the 14.1” TFT LCD Bezel” on page 59 8. To remove the LCD, first remove the four screws from the LCD, then remove the LCD from the LCD panel.
Chapter 363 Removing the 13.3” TFT LCD 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Cable Cover” on page 57 6. See “Removing the LCD Module” on page 58 7. See “Removing the 13.3” TFT LCD Bezel” on page 60 8. To remove the LCD, first remove the two screws from the LCD, then remove the LCD from the LCD panel. Removing the 13.3” TFT LCD Brackets 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Cable Cover” on page 57 6. See “Removing the LCD Module” on page 58 7. See “Removing the 13.3” TFT LCD Bezel” on page 60
64Chapter 3 8. Remove two screws on each side to remove the LCD brackets. Removing the LCD Coaxial Cable 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Cable Cover” on page 57 6. See “Removing the LCD Module” on page 58 7. See “Removing the 14.1” TFT LCD Bezel” on page 59 8. See “Removing the 13.3” TFT LCD Bezel” on page 60 9. See “Removing the 14.1” TFT LCD” on page 63 10. See “Removing the 13.3” TFT LCD” on page 64 11 . See “Removing the 13.3” TFT LCD Brackets” on page 64 12. Remove the ESD tape then remove the LCD coaxial cable from the LCD.
Chapter 365 Removing the Microphone Cable 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Cable Cover” on page 57 6. See “Removing the LCD Module” on page 58 7. See “Removing the 14.1” TFT LCD Bezel” on page 59 8. See “Removing the 13.3” TFT LCD Bezel” on page 60 9. See “Removing the 14.1” TFT LCD” on page 63 10. See “Removing the 13.3” TFT LCD” on page 64 11 . Remove the ESD tape and then the microphone cable from the LCD panel.
66Chapter 3 Disassembling the Main Unit Removing the CPU Heat Sink Plate 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. Remove two screws from the CPU heat sink plate. 6. Lift the CPU heatsink plate from the main unit. Removing the RTC Battery 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the CPU Heat Sink Plate” on page 67 6. Disconnect the RTC cable and then remove the RTC battery gently. Removing the Touch Pad Frame 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. First, disconnect the touch pad cable from the main board.
Chapter 367 6. Detach the touch pad frame together with the touch pad button from the upper case carefully. 7. Remove the touch pad scroll key from the upper case. 8. To detach the touch pad board, first disconnect the touch pad cable from the touch pad board and then remove the touch pad board from the upper case. Removing the Touch Pad Cable 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Touch Pad Frame” on page 67 6. Remove the touch pad cable from the upper case carefully.
68Chapter 3 Removing the Upper Case 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Cable Cover” on page 57 6. See “Removing the LCD Module” on page 58 7. See “Removing the CPU Heat Sink Plate” on page 67 8. See “Removing the RTC Battery” on page 67 9. Remove the screw as shown here and disconnect the FDD cable from the main unit. 10. To remove the upper case, first remove eight screws from the base of the unit as shown.
Chapter 369 11 . Pull the upper case from the unit gently. Removing the RTC Battery Holder 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Cable Cover” on page 57 6. See “Removing the LCD Module” on page 58 7. See “Removing the CPU Heat Sink Plate” on page 67 8. See “Removing the RTC Battery” on page 67 9. See “Removing the Upper Case” on page 69 10. Remove the RTC battery holder. Removing the Floppy Disk Drive Module 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Cable Cover” on page 57 6. See “Removing the LCD Module” on page 58 7. See “Removing the CPU Heat Sink Plate” on page 67 8. See “Removing the RTC Battery” on page 67 9. See “Removing the Upper Case” on page 69
70Chapter 3 10. Pull the floppy disk drive module out from the upper case carefully. Disassembling the Floppy Disk Drive Module 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Cable Cover” on page 57 6. See “Removing the LCD Module” on page 58 7. See “Removing the CPU Heat Sink Plate” on page 67 8. See “Removing the Upper Case” on page 69 9. See “Removing the Floppy Disk Drive Module” on page 70 10. Remove the two screws from the floppy disk drive bracket and remove the bracket from the drive. 11 . To disassemble the floppy disk drive module, first disconnect the floppy disk drive FPC cable from the drive. 12. Detach the FDD bezel from the drive carefully.
Chapter 371 Removing the Charger Plate 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Cable Cover” on page 57 6. See “Removing the LCD Module” on page 58 7. See “Removing the CPU Heat Sink Plate” on page 67 8. See “Removing the RTC Battery” on page 67 9. See “Removing the Upper Case” on page 69 10. To remove the charger plate, first remove the screw from the charger plate then remove the charger plate from the main board. Removing the CPU Heat Sink 1. See “Removing the Battery Pack” on page 49 2. See “Removing the Hinge Caps” on page 56 3. See “Removing the Middle Cover” on page 56 4. See “Removing the Keyboard” on page 57 5. See “Removing the Cable Cover” on page 57 6. See “Removing the LCD Module” on page 58 7. See “Removing the CPU Heat Sink Plate” on page 67 8. See “Removing the RTC Battery” on page 67 9. See “Removing the Upper Case” on page 69 10. Remove the four screws to detach the CPU heatsink from the main board.