Acer Projector Pw730 User Manual

... English

User Controls

On Screen Display Menus
Sub Menu
Settings
The Projector has multilingual On Screen Display menus that 
allow you to make image adjustments and change a variety of 
settings. The projector will automatically detect the source. 
How to operate 
1.	 To	open	the	OSD	menu,	press	“Menu”	on	the	Remote	Control	or	
Control Panel.
2. When	OSD	is	displayed,	use	   keys to select any item in the 
main	menu.	After	selecting	the	desired	main	menu	item,	press	
 
to enter sub menu...

0English ...

User Controls

Color
(Computer / Video 
Mode)
Display Mode
There are many factory presets optimized for various types of im-
ages. 
Bright : For brightness optimization.
PC : For computer or notebook.
Video	:	For	playing	video	in	a	bright	environment.
Theater : For Home Theatre usage in a dark room.
sRGB : For true-color optimization.
User : Memorize user’s settings.
Brightness
Adjust the brightness of the image.
Press the  to darken image.
Press the  to lighten the image....

... English

User Controls

White Segment
Use the white Segment control to set the white peaking level of 
DMD	chip.	0	stands	for	minimal	segment,	and	10	stands	for	maxi-
mum	segment.	If	you	prefer	a	stronger	image,	adjust	towards	the	
maximum	setting.	For	a	smooth	and	more	natural	image,	adjust	
towards the minimum setting.
Degamma
Effects	the	represent	of	dark	scenery.		With	greater	gamma	value,	dark scenery will look brighter.
Color R
Adjusts the red color. 
Color G
Adjusts the green color....

English ...

User Controls

Image
(Computer / Video 
Mode)
H. Keystone (Horizontal Keystone)
Press the  or  button to adjust image distortion horizontally and makes a squarer image.
V. Keystone (Vertical Keystone)
Press the  or  button to adjust image distortion vertically and makes a squarer image.
Aspect Ratio
Use this function to choose your desired aspect ratio.
Full : Resize image to fit full screen.
16:9	:	The	input	source	will	be	scaled	to	fit	the	width	of	the	screen	and narrowed...

... English

User Controls

“H.	Position”,	“V.	
Position”,	“Frequen-cy” and “ Tracking” functions are not 
supported	under	DVI	
and	Video	mode.
“Sharpness” func-tions is not supported 
under	DVI	and	Com-puter mode.
“Signal Type” is only available for 
Component,	Com-
posite 	video, 	S-Video,	
HDMI and SCART signal sources.
Image
(Computer / Video 
Mode)
	  Rear-Ceiling
When	you	select	this	function,	the	projector	reverses	
and turns the image upside down at same time. You can 
project from...

English ...

User Controls

ECO Mode
Choose “On” to dim the projector lamp which will lower power 
consumption,	extend	the	lamp	life	and	reduce	noise.	Choose	”Off”	
to return normal mode.
Auto Shutdown (Minutes)
The projector will auto shutdown while there is no signal input after 
the setting time.
Source Lock
When	source	lock	is	turned	off,	the	projector	will	search	for	other	
signals if the current input signal is lost. When source lock is turned \
on,	it	will	“Lock”	the	current	source...

... English

User Controls

Acer eOpening Management is a PC utility  
for user to change the default startup screen of 
Acer projector to their desired image. You can 
install Acer eOpening Management from the 
bundled CD. Connect the projector to your PC 
with the bundled USB cable then execute Acer 
eOpening Management utility to download 
your desired image from your PC to projector. 
Before	the	download	starts,	the	projector	must	
enter “Download Mode” first. Please follow 
the...

English ...

User Controls

Lamp Hour Reset
 Press the  button after choosing “Yes ”to reset the lamp hour  
	counter	to	0.
Security
Press  to start “Security” setting. If the “Security” function is \
enabled,	your	must	enter	“Administrator	Password”	first	before	
Security setting.
Security
This projector provides an excellent security function 
for the administrator to manage the usage of the 
projector .
Select “On” to enable the security function. User have to enter password depending on...

... English

User Controls

Timeout(Min.)
Once	“Security”	is	set	to	“On”,	administrator	can	set	
timeout function.
Press  or  to select timeout duration.
The	range	is	from	10	minutes	to	990	minutes.
When	time	is	up,	the	projector	will	request	user	to	enter password again.
The factory default setting of “Timeout(Min.)” is “Off”.
User Password
Press  to set up or change “User Password”.
 
Use 	,		,	 or  to select the character and 
press	“MENU”	to	confirm.
Press  to delete character after...

English ...

User Controls

The projector provides two options of ”Security Mode”.
Select “Request password only after plugging 
power	cord”,	the	project	will	request	user	to	input	
password only for the first time plugging on power 
cord of the projector.
Select “Always request password while projector 
turns	on”,	user	has	to	input	password	every	time	
when switching on the projector.
Administrator Password
“Administrator Password” can be accepted by 
both	“Enter	Administrator	Password”	and...