Acer Projector Pw730 User Manual

... English

Introduction

1.	 Laser	Indicator	Light
2. Power
3.  Laser Button
4.	 Source
5. Resync
6.  Freeze
7.	 Hide8.	 Mute
9. Aspect Ratio
10.	 Keystone/Four	Directional		
	 Select	Keys
11.	 Back
12.	 Digital	Zoom
13.	 Menu
14.	 Mouse	Left	Click
15.	 Mouse	Right	Click
Remote Control with Laser Pointer
16.	 Mouse
17.	 Volume	+/-
18.	 Page	Up/Page	Down
19.	 Empowering	Key
20.	 RGB21.	 Brightness
22.  Contrast
23.  Color
24.	 VGA
25. Component
26.	 S-Video27.	 Video28.	 HDMI
29.	 DVI
30....

0English ...

Installation

Connecting the Projector
USBHDMIDVIVGA-INPr/CrPb/CbYS-VIDEO
VIDEOAUDIO-INVGA-OUTRS-232
 To ensure the projector works well with your computer, please 
make sure the timing of the display mode is compatible with the 
projector. Refer to the “Compatibility Modes” section on page 39.
Video	Output
DVD	Player,	Settop	Box,	
HDTV	receiver
4
2
3
6
DVIVGAUSB
10
S-Video	Output
9
1
RS232
7
5
11
DVD	Player
8
PC...

... English

Installation

Powering On/Off the Projector
Power
Powering On the Projector
1.	 Open	the	lens	cap.
2.	 Ensure	that	the	power	cord	and	signal	cable	are	securely	connected.	The	Power	LED	will	flash	
amber.
3.  Turn on the lamp by pressing “Power” button on the control 
panel 	and	the	Power	LED	will	turn	amber.
4.	 Turn	on	your	source	(computer,	notebook,	video	player	 ,etc.).	The	projector	will	detect	your	source	automatically.
	
If the screen displays ”Lock” & ”Source” icons, it...

English ...

Installation

Warning Indicator
 When the “LAMP” indicator lights solid amber, the projector 
will automatically shut itself down. Please contact your local 
reseller or service center.
 
When the “TEMP” indicator lights solid amber, it indicates the 
projector has been overheated. You will see a message “Projector 
Overheated. Lamp will automatically turn off soon.” on the on-
screen display.  The projector will automatically shut itself down.
  Under normal conditions, the...

... English

Installation

Adjusting the Projector Image Height
The projector is equipped with elevator feet for adjusting 
the image height.
To raise the image:1.	 Press	the	elevator	button	
.
2.  Raise the image to the desired height ,	then	release	the	
button to lock the elevator feet into position.
3.  Use 
	to	fine-tune	the	display	angle.
To lower the image:
1.	 Press	the	elevator	button.
2.	 Lower	the	image,	then	release	the	button	to	lock	the	el
-
evator feet into position.
3.  Use...

English ...
Installation
Adjusting the Projector Zoom / Focus
You may turn the zoom ring to zoom in or out. To focus the 
image,	rotate	the		focus	ring	until	the	image	is	clear.	The	pro
-
jector	will	focus	at	distances	from	4.92	to	32.81	feet	(1.5	to10.0	
meters).
Adjusting Projection Image Size
Focus Ring Zoom	Ring
Screen(Diagonal)
Screen Size
Distance
This graph is for user’s reference only.
72"(184cm)
121"(307cm)
169"(430cm)
193"(491cm)
242"(614cm)
44" (111cm)...

... English

User Controls
Control Panel & Remote Control
There are two ways for you to control the functions: Re-
mote Control and Control Panel.
Control Panel
 Using the Control Panel
Power
 Refer	to	the	“Power	On/Off	the	Projector”	section	on	pages	12-13.
Resync
 Automatically synchronizes the projector to the input source.
Menu 
 Press “Menu” to launch the on screen display (OSD) menu or exit \
the OSD menu.
Source 
 Press	“Source”	to	choose	RGB,	Component-p,	Component-i,	
S-Video,...

English ...

User Controls

Using the Remote Control
Power 
 Refer	to	the	“Power	On/Off	the	Projector”	section	on	pages	12-13
Laser Button  
 Aim	the	remote	control	at	the	viewing	screen,	press	and	hold	this button to activate the laser pointer.
Resync
 Automatically synchronizes the projector to the input source.
Source 
 Press	“Source”	to	choose	RGB,	Component-p,	Component-i,	
S-Video,	Composite	Video	,	DVI-D/A	,	HDTV	and	HDMI	
sources.
Freeze
 Press “Freeze” to pause the screen image....

... English

User Controls

Mouse / Mouse Right Click / Mouse Left Click 
  These functions are the same as a mouse of PC or Mac.These functions are available only when the projector is connected to a computer via an USB cable.
Empowering Key 
Acer	Empowering	Key	provides	three	Acer	unique	functions,	they	
are	“Acer	eView	Management”,	”Acer	eTimer	Management”	and	”
Acer eOpening Management” respectively. 
  Acer eView Management 
Press ”e” to	launch	“Acer	eView	Management”		
submenu.
“Acer...

English ...

User Controls

RGB
 Press “RGB” for true-color optimization.
Brightness
 Press “Brightness” to adjust the brightness of the image.
Color
 Press “Color” to adjust the color temperature of image.
Contrast
 Press “Contrast” to control the difference between the lightest and darkest parts of the picture. 
VGA
	Press	“VGA”	to	change	source	to	VGA-In	connector.	This	con-nector supports Analog RGB.
Component
 Press “Component” to change source to component connec tor. This...