Acer Projector Pd724 User Manual
Here you can view all the pages of manual Acer Projector Pd724 User Manual. The Acer manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
9... English Wireless projection Connecting to a projector Once you’ve installed the software, you will be able to connect to any projector that is equipped with the Acer WPG. To connect to a projector, simply double- click the Acer WPG icon on your desktop to launch the application. The application will automatically detect available WPGs. Each WPG is iden- tifiable by the "AcerProjector" indicator in the SSID. If the projector is installed in a permanent...
Page 42
0English ... Wireless projection Using the audio function If “Wireless” is selected as the input source, you can play audio content through the internal speakers of the projector. You can also plug external speakers into the WPG’s audio-out jack for better audio quality. Your audio driver may have different terminology for some of the set- tings required below. If you wish to use the WPG’s audio features, please ensure that none of the audio settings...
Page 43
... English Wireless projection 4) Ensure that Mono Mix, Stereo Mix and/or Wave-out Mix are checked. 5) Click OK to open the “Recording Mix” window. Ensure that Mono Mix, Stereo Mix or Wave-out Mix is selected.
Page 44
English ... Wireless projection Configuring your Acer WPG You will need to be connected to an Acer WPG to change any configuration settings. Once you're connected, click the Configure button in the upper right- hand corner of the Acer WPG screen. Projector ID Check this feature to enable projector identification. If this option is enabled, a 4-digit number will be displayed when the projector is started up, or when the projector is not receiving any...
Page 45
... English Wireless projection Click on Set a new password to set a password. Enter the password — it can be up to 16 characters in length. O nce the password has been set, it needs to be entered before any changes can be made to the configuration of your Acer WPG.
Page 46
English ... Wireless projection You can also change or delete the password by clicking Configuration pass- word setup. Upgrade firmware Click on this link to check if there is any newer firmware available. You will need to be connected to a network with an open Internet connection to do this. Network settings Click on this link to change the network settings. Here, you can set a customized SSID to identify the Acer WPG. You can also change the IP address —...
Page 47
... English Wireless projection Projection controls Use the projection controls to perform various functions. Hide This feature projects a blank screen, so that you can make changes to a docu- ment, or refer to confidential information as needed, without your audience being able to see it. Freeze This feature freezes the projected image, so that you can make changes to a document, or refer to confidential information as needed, without your audi - ence...
Page 48
6English ... Appendices Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center. Problem: No image appears on screen. Ensure all the cables and power connections are correctly and se- curely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed. Please...
Page 49
... English Appendices 6. Click on “Show all devices”. Then select “Standard monitor types” under the “Manufacturers” box ; choose the resolution mode you need under the “Models” box. 7. Verify that the resolution setting of the monitor display is less than or equal to 1024 x 768. If you are using a Notebook PC: 1. You are required to implement the above steps of resolution set- ting of the computer first. 2. Switch the Notebook PC display to the “external display only” or “CRT...
Page 50
English ... Appendices Problem: The image is outstretched when displaying 16:9 DVD. The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting. If the image is still outstretched, you will also need to adjust the as- pect ratio by referring to the following: Please select 4:3 aspect ratio type on your DVD player if you are playing a 16:9 DVD. If you can’t select 4:3 aspect ratio type on your DVD player, please...