Acer Projector Pd724 User Manual

9... English

Introduction

 Connection Ports
1.	 USB	Connector
2.	 HDMI	Connector
3.	 DVI	Input	Connector	
4.	 VGA	Input	Connector	(PC	Analog	Signal)
5.	 Component	Video	Input	Connector
6.	 S-Video	Input	Connector
7.	 RS232	Connector
8.	 KensingtonTM	Lock	Port
9.	 Power	Socket
10.	 VGA	Output	Connector	(Monitor	Loop-through	Output	Connec-
tor)	
11.	 Audio	Input	Connector
12.	 Composite	Video	Input	Connectort
Below items are for PD724W/PD726W only:
13.	 Lan	(RJ45	Port	for	10/100M	Ethernet)
14.	 Audio...

0English ...
Introduction
1.	 Laser	Pointer2.	 Power
3.	 Laser	Button
4.	 Source5.	 Resync6.	 Freeze7.	 Hide8.	 Mute
9.	 Aspect	Ratio
10.	 Keystone/Four	Directional		
	 Select	Keys
11.	 Back
12.	 Digital	Zoom
13.	 Menu
14.	 Mouse	Left	Click
15.	 Mouse	Right	Click
Remote Control with Laser Pointer
16.	 Mouse
17.	 Volume	+/-
18.	 Page	Up/Page	Down
19.	 Empowering	Key
20.	 RGB21.	 Brightness22.	 Contrast23.	 Color24.	 VGA25.	 Component26.	 S-Video27.	 Video
28.	 HDMI29.	 DVI
30.	 Transmit	Indicator...

... English

Installation
Connecting the Projector
1.........................................................................\
.............................................Power	Cord2.........................................................................\
.............................................. VGA	Cable3.........................................................................\
........................Composite	Video...

English ...

Installation

1.........................................................................\
.............................................Power	Cord2.........................................................................\
................................................Lan	Cable3.........................................................................\
..........................Audio	Cable	Jack/Jack4.........................................................................\...

... English

Installation

Powering On/Off the Projector
Power
Powering On the Projector
1.	 Open	the	lens	cap.
2.	 Ensure	that	the	power	cord	and	signal	cable	are	securely	connected.	The	Power	LED	will	flash	
amber.
3.	 Turn	on	the	lamp	by	pressing	“Power”	button	on	the	control	
panel. And	the	Power	LED	will	turn	amber.
4.	 Turn	on	your	source	(computer,	notebook,	video	player	 ,etc.).		The	projector	will	detect	your	source	automatically.
	If the screen displays "Lock" &...

English ...

Installation

Warning Indicator
	When the “LAMP” indicator lights solid amber, the projector 
will automatically shut itself down.  Please contact your local 
reseller or service center.
 When the “TEMP” indicator lights solid amber for about 20 sec-
onds, it indicates the projector has been overheated.  You will see 
a message “Projector Overheated. Lamp will automatically turn 
off soon.” on the on-screen display.  The projector will automati-
cally shut itself down.
  Under...

... English

Installation

Adjusting the Projector Image Height
The	projector	is	equipped	with	elevator	feet	for	adjusting	
the	image	height.
To	raise	the	image:1.	 Press	the	elevator	button	
.
2.	 Raise	the	image	to	the	desired	height	angle		,	then	re-
lease	the	button	to	lock	the	elevator	feet	into	position.
3.	 Use	
	to	fine-tune	the	display	angle.
To	lower	the	image:
1.	 Press	the	elevator	button.
2.	 Lower	the	image,	then	release	the	button	to	lock	the	el
-
evator	feet	into	position....

6English ...
Installation
Adjusting the Projector Zoom / Focus
You	may	turn	the	zoom	ring	to	zoom	in	or	out.		To	focus	the	
image,	rotate	the		focus	ring	until	the	image	is	clear.	The	pro
-
jector	will	focus	at	distances	from	3.94	to	39.43	feet	(1.2	to12.02	
meters).
Adjusting Projection Image Size
Focus	Ring Zoom	Ring
Max.29.50"(74.9cm)73.76"(187.3cm)Min.24.63"(62.6cm)61.57"(156.4cm)143.66"(364.9cm)102.62"(260.6cm)205.23"(521.3cm)250.38"(636.0cm)
Max.(WxH)23.60"...

17... English

User Controls
Control Panel & Remote Control
There are two ways for you to control the functions: Re-
mote Control and Control Panel.
Control Panel
 Using the Control Panel
Power
 Refer to the “Power On/Off the Projector” section on pages 13-14.
Resync
 Automatically synchronizes the projector to the input source.
Menu 
 Press “Menu” to launch the on screen display (OSD) menu. To exit\
 OSD, press “Menu” again.
 Confirm your selection of items.
Source 
 Press “Source” to choose RGB,...

English ...

User Controls

Using	the	Remote	Control
Power 
 Refer	to	the	“Power	On/Off	the	Projector”	section	on	pages	13-14
Laser Button 	
 Aim	the	remote	at	the	viewing	screen,	press	and	hold	this	
button	to	activate	the	laser	pointer.
Resync
	Automatically	synchronizes	the	projector	to	the	input	source.
Source 
	Press	“Source”	to	choose	RGB,	Component-p,	Component-i,	
S-Video,	Composite	Video	,	DVI-D/A	,	HDTV	and	HDMI	
sources.
Freeze
	Press	“Freeze”	to	pause	the	screen	image.
Hide
...