Acer Projector Pd527 User Manual

							
39... English

Wireless projection

Configuring your Acer WPG
You  will  need  to  be  connected  to  an  Acer  WPG  to  change  any  configuration 
settings. Once you're connected, click the Configure button in the upper right-
hand corner of the Acer WPG screen.
               
Projector ID
Check this feature to enable projector identification. If this option is enabled, a 
4-digit number will be displayed when the projector is started up, or when the 
projector is not receiving any input.
Configuration password setup
Use  this  to  set  a  password  to  restrict  access  to  the  configuration  menus.  This 
is  useful  when  the  WPG  is  used  by  a  number  of  people,  and  you  do  not  wish 
unauthorized persons to make any changes to the configuration.
The first time you click on this link, you will see the following:
                      
						

							
40English ...

Wireless projection

Click on Set a new password to set a password.
          
Enter the password — it can be up to 16 characters in length.
           
Once the password has been set, it needs to be entered before any changes can 
be made to the configuration of your Acer WPG.
            
						

							
41... English

Wireless projection

You  can  also  change  or  delete  the  password  by  clicking  Configuration  pass-
word setup.
              
Upgrade firmware
Click  on  this  link  to  check  if  there  is  any  newer  firmware  available.  You  will 
need to be connected to a network with an open Internet connection to do this.
Network settings
Click on this link to change the network settings.
             
Here,  you  can  set  a  customized  SSID  to  identify  the  Acer  WPG.  You  can  also 
change the IP address — either set it to automatically obtain an IP address, or 
manually set a static IP address.
If  necessary,  you  can  set  the  RF  channel  used  to  connect  with  notebooks  as 
well. 
						

							
42English ...

Wireless projection
Projection controls
Use the projection controls to perform various functions.
           
Hide
This  feature  projects  a  blank  screen,  so  that  you  can  make  changes  to  a  docu-
ment,  or  refer  to  confidential  information  as  needed,  without  your  audience 
being able to see it.
Freeze
This  feature  freezes  the  projected  image,  so  that  you  can  make  changes  to  a 
document,  or  refer  to  confidential  information  as  needed,  without  your  audi
-
ence being able to see it.
Projector remote control
Through  the  WPG,  you  are  able  to  carry  out  many  of  the  same  functions  that 
the remote control allows you to perform, directly from your notebook.
Hotkey explanation
Click this button for a quick reminder of what the hotkey functions are.
 +  +  will toggle between full mode, and simplified mode:
                      
						

							
43... English

Appendices
Troubleshooting
 If you experience trouble with the projector, refer to  
 the following information.  If the problem persists, 
please contact your local reseller or service center.
Problem: No image appears on screen.
 Ensure all the cables and power connections are correctly and  
  securely connected as described in the “Installation” section.
 Ensure the pins of connectors are not crooked or broken.
 Check if the projection lamp has been securely installed. Please  
  refer to the “Replacing the lamp” section.
 Make sure you have removed the lens cap and the projector is  
  switched on.
 Ensure that the “Hide” feature is not enabled.
Problem: Partial, scrolling or incorrectly displayed image.
 Press the “Resync” button on the Remote Control.
  If you use a PC:
  If the resolution of your computer is higher than 1024 x 768.   
     Follow the steps outlined below to reset the resolution.
For Windows 3.x:
  1.  In the Windows Program Manager, click the “Windows Setup”  
    icon in the Main group.
  2.  Verify that your display resolution setting is less than or equal  
    to 1024 x 768.
For Windows 95, 98, 2000, XP:
  1.  Open “My Computer” icon, the “Control Panel” folder, and  
    then double click on the “Display” icon.
  2.  Select the “Setting” tab.  
  3.  In the “Desktop Area” you will find the resolution setting.   
    Verify that the resolution setting is less than or equal to 1024 x  
    768  resolution.
 If the projector is still not projecting the whole image, you will  
  also need to change the monitor display you are using. Refer to  
  the following steps.
  4.  Follow the above steps 1-2. Click on the “Advanced Properties”  
    button.
  5.  Select the “Change” button under the “Monitor” tab . 
						

							
44English ...

Appendices

  6.  Click on “Show all devices”. Then select “Standard monitor  
    types” under the “Manufacturers” box ; choose the resolution  
    mode you need under the “Models” box. 
  7.  Verify that the resolution setting of the monitor display is less  
    than or equal to 1024 x 768.
 If you are using a Notebook PC:
  1.  You are required to implement the above steps of resolution  
    setting of the computer first.
  2.  Switch the Notebook PC display to the “external display only”  
    or “CRT only” mode. 
  If you experience difficulty in changing resolutions or your   
  monitor freezes, restart all the equipment and the projector.
Problem: The screen of the Notebook or PowerBook computer 
is not displaying your presentation.
 If you are using a Notebook PC:
  Some Notebook PCs may deactivate their screens when a second  
  display device is in use.  Refer to your computer’s documentation  
  for information on how to reactivate the monitor display.
  If you are using an Apple PowerBook:
  In Control Panels, open the PowerBook Display to select Video  
  Mirroring “On”.
Problem: Image is unstable or flickering
 Use “Tracking” to correct it.  Refer to page 25.
 Change the monitor color setting from your computer.
Problem: Image has vertical flickering bar
 Use “Frequency” to make an ad adjustment.  Refer to page 25.
  Check and reconfigure the display mode of your graphic card to  
  make it compatible with the product.  Refer to page 27.
Problem: Image is out of focus
  Adjusts the Focus Ring on the projector lens.  Refer to page 16.
  Make sure the projection screen is between the required distance  
  5 to 40 feet (1.5 to12.2 meters) from the projector. 
						

							
45... English

Appendices

Problem: The image is outstretched when displaying 
16:9 DVD.
The projector automatically detects 16:9 DVD and adjusts the 
aspect ratio by digitizing to full screen with 4:3 default setting.
If the image is still outstretched, you will also need to adjust the as-
pect ratio by referring to the following:
 Please select 4:3 aspect ratio type on your DVD player if you are 
playing a 16:9 DVD.
 If you can’t select 4:3 aspect ratio type on your DVD player, please 
select 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed.
  Select “Image” from the OSD and adjust the projection direction.  See page 24.
Problem: Lamp burns out or makes a popping sound
  When the lamp reaches its end of life, it will burn out and may make a loud popping sound.  If this happens, the projector will 
not turn on until the lamp module has been replaced. To replace 
the lamp, follow the procedures in the “Replacing the Lamp”. See 
page 46.
Problem: LED lighting message
Message
 Power LED
Temp LEDLamp LED
Red     Blue
Standby State
(Input power cord)Slow Flashing   
Lamp lighting   
Power on   
Power off (Cooling)Quick Flashing   
Error (Lamp fail)   
Error (Thermal fail)   
Error (Fan lock fail)  Flashing 
Error (Over Temp.)   
Error 
(Lamp Breakdown)   
 =>Light On   =>Light Off 
						

							
46English ...

Appendices

Replacing the lamp
The projector will detect the lamp life itself.  It will show you 
a warning message “Lamp is approaching the end of its useful 
life in full power operation. Replacement Suggested!” When 
you see this message, changing the lamp as soon as possible.  
Make sure the projector has been cooled down for at least 30 
minutes before changing the lamp. Warning: Lamp 
compartment is hot!  Allow it to cool down before changing lamp!
Warning: To 
reduce the risk of personal injury, do not drop the lamp module 
or touch the lamp bulb. 
The bulb may shatter and cause injury if it is dropped.
 1
3
4 2
 Lamp Changing Procedure: 
  1. Turn the power off the projector by pressing the Power      button.
  2.  Allow the projector to cool down at least 30 minutes.
  3.  Disconnect the power cord.
4.  Use a screwdriver to remove the screw from the cover.
 
5.  Push up and remove the cover. 
 
6.  Remove the 2 screws from the lamp module.
  7.  Pull out the lamp module.  
 To replace the lamp module, reverse the previous steps. 
						

							
47... English

Appendices

Problem: Message Reminders
 “Lamp is approaching the end of its useful life in full power opera-
tion. Replacement Suggested!” will be shown about 10 seconds 
when lamp life is going to deplete. 
 “Projector Overheated. Lamp will automatically turn off soon.” will 
be shown when the system temperature is over heat.
 “Fan fail. Lamp will automatically turn off soon.” will be shown 
when the fan is out of order. 
						

							
48English ...

Appendices

Specifications
The specs specified below are subject to change without notice.  Regarding the final specs, please refer to Acer accounced marketing specs. 
  Light Valve  -  Single Chip DLPTM Technology by Texas Instruments
  Lamp  -  230W User Replaceable Lamp
  Number of Pixels  -  1024 pixels(H) X 768 lines(V)
  Displayable Color  -  16.7M colors
  Contrast Ratio  -  2000:1 (Full On/Full Off)
  Uniformity  -  90% 
  Noise Level  -  30dB(A)(standard mode / 27dB(A)(ECO mode)
  Projection Lens  - F/
2.4~2.65 f=28.04~33.59mm with 1.2X Manual zoom  
      lens
  Projection Screen Size (Diag.)  -  24.6 to 300 inches (0.625 to 7.62 meters) Diagonal
  Projection Distance  -  5 to 40 feet (1.5 to 12.2 meters)
  Video Compatibility  -  NTSC 3.58/NTSC 4.43/PAL/SECAM and HDTV    
      compatible  
    -  Composite video & S-Video capability
  H. Frequency  -  31.5kHz~100kHz horizontal scan
  V. Frequency  -  56Hz~85Hz vertical refresh
  Power Supply  -  Universal AC input 100-240V ; Input Frequency 
50/60Hz
  I/O Connectors  -  Power: AC power input socket
    -  VGA Input:
   
  One DVI connector for Digital signal with HDCP    
     One 15-pin D-sub for VGA, component and HDTV 
      signal
    -  VGA Output: One 15-pin D-sub for VGA output
    -  Video Input: 
   
  One Composite video RCA input
   
  One S-Video input 
    -  USB:One USB connector
    -  Audio Input: One phone jack for audio input
   -  Audio Output: One phone jack for wireless audio    
     output 
    -  Lan Output: One Lan port (RJ45 connector for    
      10/100M Ethernet) 
(for /PD525PW/PD527W only)
  Weight  -  5.9 lbs (2.7kg)
 Dimensions (W x H x D)  -  11.1 x 4.1 x 10.1 inches (283 x 104 x 256 mm)
  Environmental  -  Operating Temperature: 41~95
oF (5~ 35oC)
      Humidity: 80% maximum (Non-condensing)
    -  Storage Temperature: -4~140
oF (-20~60oC)
      Humidity: 80% maximum (Non-condensing)
  Safety Regulation  -  FCC Class B, CE Class B, VCCI-II, UL, cUL,    
      TÜV-GS, C-tick, PSB, PSE, CB Report, CCC