Acer Projector Pd527 User Manual
Have a look at the manual Acer Projector Pd527 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9... English Introduction Connection Ports 1. RS232 Connector 2. USB Connector 3. Monitor Loop-through Output Connector (VGA-Out) 4. Audio Input Connector 5. Composite Video Input Connector 6. S-Video Input Connector 7. PC Analog Signal/HDTV/Component Video Input Connector 8. DVI Input Connector (for Digital signal with HDCP function) (Op- tional) 9. KensingtonTM Lock Port Below items are for PD525PW/PD527W only: 10. Lan (RJ45 Port for 10/100M Ethernet) 11. Audio Output Connector 12. Reset Button 13. Status Indicator 14. Antenna 1 6 2 5 3 4 7 9 14 F o r P D 5 2 5 P W /PD527W only 11 12 13 10 8
10English ... Introduction 1. Laser Pointer 2. Power 3. Laser Button 4. Source 5. Resync 6. Freeze 7. Hide 8. Mute 9. Aspect Ratio 10. Keystone/Four Directional Select Keys 11. Back 12. Digital Zoom 13. Menu 14. Mouse Left Click Remote Control with Laser Pointer 15. Mouse Right Click 16. Mouse 17. Empowering Key 18. Volume + 19. Volume - 20. Page Up 21. Page Down 22. VGA 23. S-Video 24. Video 25. Component 26. DVI 27. Wireless or Language 28. Transmit Indicator Light 28 11 8 24 4 12 3 7 17 22 2 10 5 13 9 6 23 1 14 15 16 18 21 20 25 26 27 19
11... English Installation 1. ....................................................................................................................Power Cord2. .....................................................................................................................VGA Cable3. ...............................................................................................Composite Video Cable4. ......................................................................................................................USB Cable5. ........................................................................VGA to Component/HDTV Adapter 6. ................................................................................................................S-Video Cable 7. .................................................................................................Audio Cable Jack/Jack8. ................................................................................DVI Cable (Optional Accessory) Connecting the Projector To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Refer to the “Compatibility Modes” section on page 49. Video OutputDVD Player, Settop Box, HDTV receiver 4 2 3 6 7 DVIRGB USB 5 S-Video Output 8 1 RS2327
12English ... Installation 1 1. ....................................................................................................................Power Cord2. .......................................................................................................................Lan Cable3. ...............................................................................................Audio Cable Jack/RCA4. ..........................................................................................................................Antenna(for PD525PW/PD527W only, need to attach the antenna by user) Internet Connecting the Projector For Wireless function 23 4
13... English Installation Power/Standby Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will flash red. 3. Turn on the lamp by pressing “Power/Standby” button on the control panel.And the Power LED will turn blue. 4. Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. If the screen displays "Lock" & "Source" icons, it means the pro- jector locks on this source type and there is no such type of input signal found If the screen displays “No Signal”, please make sure the signal cables are securely connected. If you connect multiple sources at the same time, using the “Source” button on the remote control or control panel to switch. Powering On/Off the Projector Turn on the projector first and then the signal sources. 1
14English ... Installation Warning Indicator When the “LAMP” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service center. When the “TEMP” indicator lights solid red for about 20 sec- onds, it indicates the projector has been overheated. You will see a message “Projector Overheated. Lamp will automatically turn off soon.” on the on-screen display. The projector will automati- cally shut itself down. Under normal conditions, the projector can be switched on again after it has cooled down. If the problem persists, you should con- tact your local dealer or our service center. When the “TEMP ” indicator flashs red for about 30 seconds, you will see a message “Fan fail. Lamp will automatically turn off soon.” on the on-screen display. Please contact your local dealer or our service center. Powering Off the Projector 1. Press the “Power/Standby” button to turn off the projector lamp, you will see a message “Please press power button again to com - plete the shutdown process. Warning: DO NOT unplug while the projector fan is still running.” displayed on the projector’s screen. Press the “Power/Standby” button again to confirm, otherwise the message will disappear after 5 seconds. 2. The cooling fans continue to operate for about 30 seconds for cooling cycle and the Power LED will be quick red flash. When the Power LED becomes slow flashing, the projector has entered standby mode. If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press “Power/Standby” button to restart the projector. 3. Disconnect the power cord from the electrical outlet and the pro - jector. 4. Do not turn on the projector immediately following a power off procedure.
15... English Installation Adjusting the Projected Image Adjusting the Projector Image Height Elevator Foot 12Elevator Button The projector is equipped with an elevator foot for adjusting the image height. To raise the image: 1. Press the elevator button . 2. Raise the image to the desired height angle , then release the button to lock the elevator foot into position. To lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the elevator foot into position.
16English ... Installation 0D[ FP FP FP FP FP FP 0LQ FP FP FP FP FP FP 0D[ :[+ [ [FP [ [FP [ [FP [ [FP [ [FP [ [FP 0LQ :[+ [ [ FP [ [ FP [ [FP [ [FP [ [FP [ [ FP P P P P P P Focus Ring Zoom Ring Adjusting the Projector Zoom / Focus You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 5 to 40 feet (1.5 to12.2 meters) . Adjusting Projection Image Size Screen(Diagonal) Screen Size Distance This graph is for user’s reference only.
17... English
User Controls
Remote ControlControl Panel
Control Panel & Remote Control
There are two ways for you to control the functions: Re-
mote Control and Control Panel.
Using the Control Panel
Power
Refer to the “Power On/Off the Projector” section on pages
13-14.
Resync
Automatically synchronizes the projector to the input source.
Source
Press “Source” to choose RGB, Component-p, Component-i,
S-Video, Composite, DVI-D (Optional), Video and HDTV
sources.
Menu
Press “Menu” to launch the on screen display (OSD) menu. To exit
OSD, press “Menu” again.
Confirm your selection of items.
Four Directional Select Keys
Use to select items or make adjustments to
your selection.
18English ...
User Controls
Using the Remote Control
Power
Refer to the “Power On/Off the Projector” section on pages
13-14
Laser Button
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
Resync
Automatically synchronizes the projector to the input source.
Source
Press “Source” to choose RGB, Component-p, Component-i,
S-Video, Composite Video , DVI-D (Optional)and HDTV
sources.
Freeze
Press “Freeze” to pause the screen image.
Hide
Momentarily turns off the video. Press “Hide” to hide image,
press again to restore display of the image.
Aspect Ratio
Use this function to choose your desired aspect ratio.(4:3/16:9/
Auto )
Mute
Use this key to close the volume.
Four Directional Select Keys
Use to select items or make adjustments to
your selection for the OSD menu operation.
Keystone
Adjusts image distortion caused by tilting the projector (±16
degrees).
Menu
Press “Menu” to launch the on screen display menu. To exit
OSD, press “Menu” again.
Zoom
Digital Zoom in/out.
Back
Back to the previous step for the OSD menu operation.