Acer Projector Pd527 User Manual

19... English

User Controls

 Mouse / Mouse Right Click / Mouse Left Click 
   These functions are the same as a mouse of PC or Mac.
  Empowering  Key 
 Acer Empowering Key provides three Acer unique functions, they are "Acer eView Management", "Acer eTimer Management" and "Acer eOpening Management" respectively. Press "e" key for more than one second to launch the on screen display main menu to 
modify its function.   
   
Acer eView Management 
 Press "e" to...

20English ...

User Controls

 S-Video
  Press “S-Video” to change source to S-Video source. 
  VGA
  Press “VGA” to change source to VGA-In connector. This
    connector
 supports Analog RGB, YPbPr (480p/576p/720p/
    1080i),
 YCbCr (480i/576i) and RGBsync. 
  Video
  Press “Video” to change source to Composite Video   
    source.
  Component
  Press “Component” to change source to component connec 
    tor.
 This connector supports YPbPr (480p/576p/720p/1080i)  
    and YCbCr (480i/576i
)....

21... English

User Controls

The Projector has multilingual On Screen Display menus that 
allow you to make image adjustments and change a variety of 
settings. The projector will automatically detect the source. 
How to operate 
1.  To open the OSD menu, press “Menu” on the Remote Control or    
  Control Panel.
2. When OSD is displayed, use     keys to select any item in the    
       main menu. After selecting the desired main menu item, press 
    
  to enter sub menu for feature setting.
3. Use...

22English ...

User Controls

Color
(Computer / Video 
Mode)
Display Mode
 There are many factory presets optimized for various types of  
images.  
   Bright : For brightness optimization.
   PC : For computer or notebook.
   Video : For playing video in a bright environment.
  Theater : For Home Theatre usage in a dark room.  
   sRGB : For true-color optimization.
  User : Memorize user’s settings.
 Brightness
 Adjust the brightness of the image.
  Press the  to darken image.
  Press the  to...

23... English

User Controls

Color
(Computer / Video 
Mode)
 White Segment
 Use the white Segment control to set the white peaking level of DMD chip. 0 stands for minimal segment, and 10 stands for maxi-mum segment.  If you prefer a stronger image, adjust towards the maximum setting.  For a smooth and more natural image, adjust towards the minimum setting.
 Degamma
 Effects the represent of dark scenery.  With greater gamma value, dark scenery will look brighter.
Color R
 Adjusts the red color. 
Color...

24English ...

User Controls

Keystone
Adjust image distortion caused by tilting projection. (±16 degrees)
Aspect Ratio
Use this function to choose your desired aspect ratio.
 Auto : Keep the image with original width-higth ratio and maxi 
              mize the image to fit native horizontal or vertical pixels. 
 4:3 : The input source will be scaled to fit the projection screen    
              and becomes 4:3 ratio. 
 16:9 : The input source will be scaled to fit the width of the...

25... English

User Controls

 H. Position (Horizontal Position)
  Press the  to move the image left. 
  Press the  to move the image right. 
 V.  Position (Vertical Position)
  Press the  to move the image down.
  Press the  to move the image up.
 Frequency
 “Frequency”changes the display data frequency to match the fre-
quency of your computer’s graphic card. If you experience a  
vertical flickering bar, use this function to make an adjustment.
 Tracking
 “Tracking” synchronizes the signal timing...

26English ...

User Controls

ECO Mode
Choose “On” to dim the projector lamp which will lower power 
consumption, extend the lamp life and reduce noise.  Choose ”Off” 
to return normal mode.
Auto Shutdown(Minutes)
The projector will auto shutdown while there is no signal input 
after the setting time.
Source Lock
When source lock is turned off, the projector will search for other 
signals if the current input signal is lost. When source lock is 
turned on, it will “Lock” the current source channel...

27... English

User Controls

Acer eOpening Management is a PC utility    
for user to change the default startup screen of 
Acer projector to their desired image. You can 
install Acer eOpening Management from the 
bundled CD. Connect the projector to your PC 
with the bundled USB cable then execute Acer 
eOpening Management utility to download 
your desired image from your PC to projector. 
Before the download starts, the projector must 
enter “Download Mode” first. Please follow the 
instruction...

28English ...

User Controls

Management 
(Computer / Video 
Mode)
Lamp Hour Elapse
 Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding
 Choose this function to show or to hide warning message when the  
 changing lamp message is displayed.  The message will show up 30 
hours before end of life.
Lamp Hour Reset
 Press the  button after choosing “Yes ”to turn the lamp hour  
 counter to 0 hours. 
Reset
Press the  button after choosing “Yes” to return the display pa-
rameters on all...