Acer Projector P5280 User Manual

19
EnglishP1165/P1165P/P1265/P1265P/P5260i/P5270/P5280 series
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
W (cm) x H (cm)Max zoom
Min zoom
From base to top of 
image 

30 61 x 46 1.2 1.3 53
40 81 x 61 1.6 1.7 70
50102 x 762.02.288
60 122 x 91 2.4 2.6 105
70 142 x 107 2.8 3.1 123
80 163 x 122 3.2 3.5 140
90 183 x 137 3.6 3.9 158
100 203 x 152 4.0 4.4 175
120 244 x 183 4.8 5.2 210
150 305 x 229 5.9 6.6 263
180 366 x 274 7.1 7.9 315
200 406 x 305 7.9 8.7 351
250 508 x 381 9.9 10.9 438
300 610 x...

20
English
P5370W series
The table below shows how to achieve a desired image size by adjusting either 
the position or the zoom ring. For example: to obtain an image size of 50 set 
the projector at a distance 1.7 m and 1.8 m from the screen and adjust the zoom 
level accordingly.
Desired Distance
HeightForm base to 
top of image
1.8m1.7m
50Desired
image size
A
CD
B 

21
EnglishP5370W series
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
W (cm) x H (cm)Max zoom
Min zoom
From base to top of 
image 

30 65 x 40 1.0 1.1 45
40 86 x 54 1.3 1.5 61
50108 x 671.71.876
60 129 x 81 2.0 2.2 91
70 151 x 94 2.3 2.6 106
80 172 x 108 2.7 2.9 121
90 194 x 121 3.0 3.3 136
100 215 x 135 3.3 3.7 151
120 258 x 162 4.0 4.4 182
150 323 x 202 5.0 5.5 227
180 388 x 242 6.0 6.6 272
200 431 x 269 6.7 7.3 303
250 538 x 337 8.3 9.2 378
300 646 x 404 10.0 454
Zoom Ratio: 1.1x 

22
English
User Controls
Acer Empowering Technology
Empowering  KeyAcer Empowering Key provides three 
Acer unique functions, they are Acer 
eView Management, Acer eTimer 
Management and Acer eOpening 
Management respectively. Press   
key for more than one second to launch 
the Onscreen display main menu to 
modify its function.
Acer eView ManagementPress   to launch Acer eView 
Management  submenu.
Acer eView Management is for 
display mode selection. Please refer to 
Onscreen Display Menus section for...

23
EnglishOnscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments 
and change a variety of settings.
Using the OSD menus
•To open the OSD menu, press MENU on the remote control or control 
panel.
•When the OSD is displayed, use the   keys to select any item in the 
main menu. After selecting the desired main menu item, press   to enter 
submenu for feature setting.
•Use the   keys to select the desired item and adjust the settings by 
using the   keys....

24
English
Color setting
Display ModeThere are many factory presets optimized for various types of 
images.
•Bright: For brightness optimization.
•Standard: For common environment.
•Video: For playing video in a bright environment.
•Blackboard: Blackboard mode can improve displayed color 
when you project onto darker surfaces.
•User 1: Memorize user’s settings.
•User 2: Memorize user’s settings.
BrightnessAdjust the brightness of the image.
•Press   to darken image.
•Press   to lighten the image....

25
English
Note: Saturation and Tint functions are not supported under computer 
mode or DVI mode.
Image setting
TintAdjusts the color balance of red and green.
•Press   to increase the amount of green in the image.
•Press   to increase the amount of red in the image.
Keystone Adjust image distortion caused by tilting projection. (±40 degrees)
Aspect Ratio Use this function to choose your desired aspect ratio.
•Auto: Keep the image with original width-higth ratio and maxi 
mize the image to fit native...

26
English
Note: H. Position, V. Position, Frequency and Tracking functions 
are not supported under DVI or Video mode.
Note: Sharpness functions is not supported under DVI and Computer 
mode.
Note: Signal Type function is only for HDMI or SCART connector.Front-Ceiling
•When you select this function, the projector inverts the image for 
ceiling-mounted projection.
Rear-Desktop
•When you select this function, the projector reverses the image so 
you can project from behind a translucent screen....

27
EnglishManagement setting
ECO Mode Choose On to dim the projector lamp which will lower power 
consumption, extend the lamp life and reduce noise.  Choose Off 
to return normal mode.
Auto Shutdown The projector will automatically shutdown when there is no signal 
input after the allocated time. (in minutes)
Source Lock When source lock is turned off, the projector will search for 
other signals if the current input signal is lost. When source lock is 
turned on, it will lock the current source channel...

28
English
Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding Activate this function to display a reminder to change the lamp 30 
hours before its expected end-of-life.
Lamp Hour Reset
Press the   button after choosing Yes to turn the lamp hour 
counter to 0 hours.
Security Security
This projector provides a useful security function for the 
administrator to manage usage of the projector .
Press   to change the Security setting. If the security function 
is enabled,...