Acer Projector P1500 User Guide

1
EnglishIntroduction
Product Features
This product is a single-chip DLP® projector, including the following 
outstanding features:
•DLP® technology
•X111/X1140/X1140A/X111P: Native 800 x 600 SVGA resolution, Auto/4:3/
16:9 aspect ratio supported
X1240: Native 1024 x 768 XGA resolution, Auto/4:3/16:9 aspect ratio 
supported
X1340W/P1340W/X1340WH/P1340WG: Native 1280 x 800 WXGA 
resolution,Auto/Full/4:3 /16:9/L.Box aspect ratio supported
H6510BD/P1500: Native 1920 x 1080 1080p...

2
English
Package Overview
This projector comes with all the items shown below. Check to make sure you 
have them all. Contact your dealer immediately if any thing is missing.
Projector Power cord VGA cable
Security card User’s guide (CD-ROM) Remote control
Quick start guide Battery x 2 Carrying case
 (Optional)
Dust filter
 (Optional) 

3
EnglishProjector Overview
Projector Outlook
Front/upper side
Rear side
#Description#Description
1 Control panel 5 Zoom ring
2 Projection lens 6 Focus ring
3 Tilt adjusting wheel 7 Remote control receiver
4 Power key and Power indicator LED
#Description#Description
1 Mini USB connector 7 HDMI connector
2 Monitor loop-through output connector 8 Power socket
3 Analog RGB signal/HDTV/component 
video input connector9 Tilt adjusting wheel
4 RS232 connector 10 Kensington™ lock port
5 S-Video input connector...

4
English
Control Panel
#FunctionDescription
1 LAMP Lamp Indicator LED.
2POWER indicator 
LEDRefer to the Turning the Projector On/Off section.
3 Keystone Adjusts image distortion caused by tilting projection 
(±40 degrees).
4 RESYNC Automatically synchronizes the projector to the input 
source.
5 MENU Launches the Onscreen Display (OSD) menu, returns to 
the previous step for the OSD menu operation or exits 
the OSD menu.
6 Power key Refer to the Turning the Projector On/Off section.
7 TEMP Temp...

5
EnglishRemote Control Layout
#FunctionDescription
1 POWER Refer to the Turning the Projector On/Off section.
2 ASPECT RATIO To choose the desired aspect ratio.
3 ZOOM Zooms the projector display in or out.
4 RESYNC Automatically synchronizes the projector to the input 
source.
5
KeystoneAdjusts image distortion caused by tilting projection 
(±40 degrees).
Four 
directional 
selection 
keysSelects items or makes adjustments to your selection.
6 Keypad 0~9 Press 0~9 to input a password in the Setting >...

6
English
11 Infrared 
transmitterSends signals to the projector.
12 Empowering key Enables unique Acer functions: eView, eTimer, ePower 
Management, e3D.
13 FREEZE To pause the screen image.
14 HIDE Press HIDE to hide screen image; press again to 
display the image.
15 SOURCE Chooses RGB, component video, S-Video, composite 
video, HDMI or HDTV source. 
16 MENU Launches the Onscreen Display (OSD) menu, returns to 
the previous step for the OSD menu operation or exits 
the OSD menu.
17 PgUp/PgDn For...

7
EnglishGetting Started
Connecting the Projector
#Description#Description
1Power cord 6S-Video cable
2 VGA cable 7 RS232 cable
3 VGA to component video/HDTV 
adapter8 USB cable
4 Composite video cable 9 3 RCA component cable
5 Audio cable
RS232
RS232
RB G RB G
HDTV adapterD-Sub
D-Sub
78
D-Sub
D-Sub
2
56
4
2
USB
USB
 1
RW
9
3
Y
Y
5
5
RW
DVD player, 
Set-top box, 
HDTV receiver VGA
RS232Video/S-Video 
Output
Display
Speakers
X111/X1140/X1140A/X111P/X1240/X1340W
 
 
  

8
English
#Description#Description
1 Power cord 6 S-Video cable
2 VGA cable 7 RS232 cable
3 VGA to component video/HDTV 
adapter8 USB cable
4 Composite video cable 9 3 RCA component cable
5 Audio cable 10 HDMI cable
RB G
D-SubHDTV adapter
D-Sub
D-Sub
8
D-Sub
2
6
4
USB1
RW
9
Y
Y
5
5USB
37
RS232
RS232
2
10
RB G
RW
5
DVD player, 
Set-top box, 
HDTV receiver VGA
RS232Video/S-Video 
Output
Display
Speakers
P1340W/X1340WH/P1340WG 

9
English
Note: To ensure the projector works well with your computer, 
please make sure the timing of the display mode is compatible 
with the projector.
#Description#Description
1 Power cord 7 RS232 cable
2 VGA cable 8 USB cable
4 Composite video cable 9 3 RCA component video cable
5 Audio cable 10 HDMI cable
6S-Video cable
DVD player, 
Set-top box, 
HDTV receiver VGA
RS232Video/S-Video 
Output
Display
Speakers
H6510BD/P1500 

10
English
Turning the Projector On/Off 
Turning On the Projector
1 Ensure that the power cord and signal cable are securely connected. 
The Power LED will light red.
2 Turn on the projector by pressing   (POWER) on the control panel or 
remote control, and the Power indicator LED will turn blue.
3 Turn on your source (computer, notebook, video player, etc.). The 
projector will detect your source automatically.
• If the screen displays No Signal, please make sure the signal cables 
are securely...