Acer Pn X14 Users Guide

21
EnglishColor
Display ModeThere are many factory presets optimized for various types 
of images.
•Bright: For brightness optimization.
•Presentation: For meeting presentation with higher 
brightness.
•Standard: For common environment.
•Video: For playing video in a bright environment.
•Education: For education environment. (for S5201/
T111/PS-X11/S5201B/T111E/PS-X11K/S5301WB/T121E/
PS-W11K)
•User: Memorize user’s settings.
Wall ColorUse this function to choose a proper color according to the 
wall....

22
English
Note: Saturation and Tint functions are not supported under 
computer, or HDMI (PC) mode.
Note: HDMI Color Range is only available when the input signal is HDMI.
DegammaEffects the representation of dark scenery. With greater 
gamma value, dark scenery will look brighter.
Color RAdjusts the red color.
Color GAdjusts the green color.
Color BAdjusts the blue color.
SaturationAdjusts a video image from black and white to fully 
saturated colors.
•Press   to decrease the amount of color in the...

23
EnglishImage
Projection
• Front-Desktop: The factory default setting.
• Front-Ceiling: When you select this function, the 
projector inverts the image for ceiling-mounted 
projection.
• Rear-Desktop: When you select this function, the 
projector reverses the image so that you can project 
behind a translucent screen.
• Rear-Ceiling: When you select this function, the 
projector reverses and inverts the image at same time. 
You can project from behind a translucent screen with 
ceiling mounted...

24
English
SharpnessAdjusts the sharpness of the image.•Press   to decrease the sharpness.
•Press   to increase the sharpness.
H. Position 
(Horizontal 
Position)
•Press   to move the image left.
•Press   to move the image right.
V. Position 
(Vertical 
Position)
•Press   to move the image down.
•Press   to move the image up.
FrequencyChanges the projector’s refresh rate to match the frequency 
of your computer’s graphics card. If you experience a vertical 
flickering bar in the projected image, use this...

25
English
Note: H. Position, V. Position, Frequency and Tracking functions 
are not supported under video mode.
Note: Sharpness function is not supported under computer mode.
Note:
The 3D function is supported by VGA source only. Please see the timing 
table for detailed 3D timings.
It needs correct settings on graphics card 3D application program for correct 
3D display.
The SW players, such as Stereoscopic Player and DDD TriDef Media Player 
can support 3D format files. You can download these players...

26
EnglishStartup ScreenUse this function to select your desired startup screen. If you 
change the setting, it will take effect when you exit the OSD 
menu.•Acer: The default startup screen of your Acer projector.
•User: Use the memorized picture from the Screen 
Capture function.
Screen CaptureUse this function to customize the startup screen. To capture 
the image that you want to use as the startup screen, follow 
the instructions below.
Notice:
Before proceeding with the following steps, make sure...

27
English
Closed CaptionSelects a preferred closed captioning mode from CC1, CC2, 
CC3, CC4, (CC1 displays captions in the primary language in 
your area). Select Off to turn off the captioning feature. 
This function is only available when a composite video or S-
Video input signal is selected and its system format is NTSC.
Set your screen aspect ratio to 4:3. The function is not 
available when the aspect ratio is 16:9 or 16:9 format 
detected under Auto mode.
SecuritySecurity
This projector provides...

28
English
User Password
•Press   to set up or change User Password.
•Use the numerical keys on the remote control to set the 
password and press MENU to confirm.
•To delete the digits, Press  .
•Enter the password again when you see Confirm 
Password displayed.
•The password should be 4~8 digits in length.
•If you select Request password only after plugging 
power cord, you are requested to input the password 
every time the power cord is plugged.
•If you select Always request password while projector...

29
EnglishResetPress   after choosing Yes to return the display 
parameters on all menus to the factory default settings.
LAN Setting
(for P5206/
N216/PN-X14/
S5201/T111/PS-
X11)To connect your projector to the network:
1 Take a RJ45 cable and connect one end to the LAN input 
jack of the projector and the other end to the RJ45 port.
2 Enter the LAN Setting menu. The Enter Administrator 
Password dialogue box is displayed.
3 Enter Administrator Password. The next level menu 
is displayed.
The factory...

30
English
About LAN Setting (for P5206/N216/PN-X14/S5201/T111/PS-X11)
Note 1 : An overview of the remote network operation page
LAN
(for S5201B/
T111E/PS-X11K/
S5301WB/
T121E/PS-W11K)•The default value is Off. Choose On to enable the 
LAN connection.
LAN IP/Mask
(for S5201B/
T111E/PS-X11K/
S5301WB/
T121E/PS-W11K)
•Identify IP and Mask address.
LAN Reset
(for S5201B/
T111E/PS-X11K/
S5301WB/
T121E/PS-W11K)
•Reset LAN function.
Auto ScreenThe default value is On. The up/down move of your 
electronic screen...