Acer Pn X14 Users Guide

11
EnglishAdjusting the Projected Image
Adjusting the Height of the Projected Image
The projector is equipped with an elevator foot for adjusting the image height.
To raise the image:
1 Press the elevator button.
2 Raise the image to the desired height angle, then release the button 
to lock the elevator foot into position.
3 Use Tilt adjusting wheel to fine-tune the display angle.
To lower the image:
1 Press the elevator button.
2 Lower the image to the desired height angle, then release the button 
to...

12
English
How to Optimize Image Size and Distance
Consult the table below to find the optimal image sizes achievable when the 
projector is positioned at a desired distance from the screen.
•P5206/N216/PN-X14
If the projector is 3 m from the screen, good image quality is possible for image 
sizes between 75 and 98.
Note: Remind as below figure, the space of 161 cm height is 
required when the projector is located at 3 m distance.
Desired
Distance 
(m)
< A >Minimum Screen Size (Min zoom) Maximum Screen...

13
English•S5201/T111/PS-X11/S5201B/T111E/PS-X11K
If the projector is 2 m from the screen, good image quality is possible for image 
sizes around 161.
Note: Remind as below figure, the space of 320 cm height is 
required when located at 2 m distance.
Desired
Distance 
(m)
< A >Screen Size
Diagonal 
(inch)
< B >W (cm) x H (cm)From base to 
top of image 
(cm) 
< C >
0.5 40 82 x 61 80
0.8 65 131 x 98 128
1.1 89 180 x 135 176
1.4 113 230 x 172 224
1.7 137 279 x 209 272
2161328 x 246320
2.3 186 377 x 283 368...

14
English
•S5301WB/T121E/PS-W11K
If the projector is 2 m from the screen, good image quality is possible for image 
sizes around 189.
Note: Remind as below figure, the space of 281 cm height is 
required when located at 2 m distance.
Desired
Distance 
(m)
< A >Screen Size
Diagonal 
(inch)
< B >W (cm) x H (cm)From base to 
top of image 
(cm) 
< C >
0.5 47 102 x 64 70
0.6 57 122 x 77 84
0.7 66 143 x 89 98
0.8 76 163 x 102 112
0.9 85 184 x 115 126
1 95 204 x 128 140
1.5 142 306 x 191 210
2189408 x 255281...

15
EnglishHow to Get a Preferred Image Size by Adjusting 
Distance and Zoom
The table below shows how to achieve a desired image size by adjusting either 
the position or the zoom ring.
•P5206/N216/PN-X14
To obtain an image size of 50 set the projector at a distance between 1.5 m 
and 2.0 m from the screen and adjust the zoom level accordingly.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
< A >W (cm) x H (cm)Max zoom
< B >Min zoom
< C >From base to top of 
image < D >
30 61 x 46 1.2 49
40 81...

16
English
•S5201/T111/PS-X11/S5201B/T111E/PS-X11K
To obtain an image size of 50 set the projector at a distance 0.6 m from the 
screen.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
< A >W (cm) x H (cm)Max zoom
< B >Min zoom
< C >From base to top of 
image < D >
30 61 x 46 0.4 0.4 59
40 81 x 61 0.5 0.5 79
50102 x 760.60.699
60 122 x 91 0.7 0.7 119
70 142 x 107 0.9 0.9 139
80 163 x 122 1.0 1.0 158
90 183 x 137 1.1 1.1 178
100 203 x 152 1.2 1.2 198
120 244 x 183 1.5 1.5 238
150 305 x 229 1.9...

17
English•S5301WB/T121E/PS-W11K
To obtain an image size of 50 set the projector at a distance 0.5 m from the 
screen.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
< A >W (cm) x H (cm)Max zoom
< B >Min zoom
< C >From base to top of 
image < D >
30 65 x 40 0.3 0.3 44
40 86 x 54 0.4 0.4 59
50108 x 670.50.574
60 129 x 81 0.6 0.6 89
70 151 x 94 0.7 0.7 104
80 172 x 108 0.8 0.8 118
90 194 x 121 0.9 0.9 133
100 215 x 135 1.1 1.1 148
120 258 x 162 1.3 1.3 178
150 323 x 202 1.6 1.6 222
180 388 x 242...

18
English
User Controls
Installation Menu
The installation menu provides an onscreen display (OSD) for projector 
installation and maintenance. Use the OSD only when the message No 
signal input is displayed on the screen.
1 Turn on the projector by pressing   (POWER) on the control panel or 
remote control.
2 Press MENU on the control panel or remote control to launch the 
OSD for projector installation and maintenance.
3 The background pattern acts as a guide to adjust the calibration and 
alignment...

19
EnglishAcer Empowering Technology
Empowering KeyAcer Empowering Key provides three 
Acer unique functions: Acer eView 
Management, Acer eTimer 
Management, Acer eOpening 
Management and Acer ePower 
Management. Press   for more 
than one second to launch the 
Onscreen Display main menu to modify 
its function.
Acer eView ManagementPress   to launch Acer eView 
Management.
Acer eView Management is for 
display mode selection. Please refer to 
the Onscreen Display (OSD) Menus 
section for more details....

20
English
Onscreen Display (OSD) Menus
The projector has multilingual Onscreen Display (OSD) menus that allow 
you to make image adjustments and change a variety of settings.
Using the OSD menus
•To open the OSD menu, press MENU on the control panel or remote 
control.
•When the OSD is displayed, use   to select an item in the main menu. 
After selecting the desired main menu item, press   to enter a submenu 
for feature setting.
•Use   to select the desired item and adjust the settings by using 
....