Acer Pd110 Users Guide

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals21
English
4. Procedure as Step.3.
5. Press 
 to save and exit the Users info. menu.
6. The startup screen will display the new wording after restart the projector.
Note:
XEach line can input 35 characters only.
XOnce entering Users info. menu can use remote control to operate only.
XUse Del to delete the previous character.
XUse Space to add a space.
User’s Info          

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals22
English
User Controls
Computer Mode
Image-I
Brightness
Adjusts the brightness of the image.
XPress W to darken image.
XPress X to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of
the picture. Adjusts the contrast changes the amount of black and white in the image.
XPress W to decrease the contrast.
XPress X to increase the...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals23
English
User Controls
Computer Mode
Image-II
Frequency
“Frequency” is for changing the display data frequency to match the frequency of
your computer’s graphic card. When you experience a vertical flickering bar, use this
function to make an adjustment.
Tracking
Choose “Tracking” to synchronize the signal timing of the display with that of the
graphic card. When you experience an unstable or...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals24
English
User Controls
Video Mode
Image-I
Brightness
Adjusts the brightness of the image.
XPress W to darken the image.
XPress X to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts
of the picture. Adjusts the contrast changes the amount of black and white in the
image.
XPress W to decrease the contrast.
XPress X to increase the...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals25
English
User Controls
Video Mode
Image-II
Keystone
Adjust image distortion caused by tilting the projector. (±16 degrees)
16:9/4:3 (Aspect Ratio)
You can use this function to select your desired aspect ratio.
Zoom
You can use this function to adjust the screen to the most appropriate size or to
enlarge a particular area. You can also use STWX to change the area you want to
enlarge.
Color Temp....

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals26
English
User Controls
Computer / Video Mode
Language
Language
You can display the multilingual OSD menu. Use S and T to select your preferred
language.        

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals27
English
User Controls
Computer / Video Mode
Management
Menu Location
Choose the Menu location on the display screen.
Projection
X
Front-Desktop
The factory default setting.
X
Rear-Desktop
When you select this function, the projector reverses the image so you can project
behind a translucent screen.
X
Front-Ceiling
When you select this function, the projector turns the image upside down for...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals28
English
Appendices
Troubleshooting
If you experience trouble with the projector, refer to the following.  If the
problem persists, please contact your local reseller or service center.
Problem: No image appears on screen.
XEnsure all the cables and power connections are correctly and  securely connected
as described in the “Installation” section.
XEnsure the pins of connectors are not crooked or...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals29
English
Appendices
Problem: The screen of the notebook or PowerBook computer
is not displaying your presentation.
XIf you are using Notebook PC:
Some Notebook PCs may deactivate their own monitor’s screen when a second
display device is in use. Each of them has a different way to be reactivated.  Refer
to your computer documentation for detailed information.
XIf you are using an Apple PowerBook:...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals30
English
Appendices
Problem: The image is distorted when displaying 16:9 DVD.
The projector itself will automatically detect 16:9 DVD and adjust the aspect ratio by
digitizating to full screen with 4:3 default setting.
If the image is still distorted, you will also need to adjust the aspect ratio by referring
to the following:
XPlease select 4:3 aspect ratio type on your DVD player if you are...