Acer Extensa 5630z Service Guide

Chapter 135
Max. media 
transfer rate 
(disk-buffer, 
Mbytes/s)540 540 540 850
DC Power Requirements
Voltage 
tolerance5V(DC) +/- 5% 5V(DC) +/- 5%5V(DC) +/- 5% 5V(DC) +/- 5%
Optical Disc Drive
ItemSpecification
Vendor & model name TOSHIBA SUPER-MULTI DRIVE DL 8X TS-L633A LF
PIONEER SUPER-MULTI DRIVE 8X DVR-TD08RS LF
PANASONIC SUPER-MULTI DRIVE DL 8X UJ-870A LF
HLDS SUPER-MULTI DRIVE TRAY DL 8X GSA-T50N LF
HLDS SUPER-MULTI DRIVE DL 8X GSA-T50N LF
SONY SUPER-MULTI DRIVE DL 8X AD-7560S LF
PLDS SUPER-MULTI...

36Chapter 1
Loading mechanism Load: Manual
Release: (a) Electrical Release (Release Button)
               (b) Release by ATAPI command 
               (c) Emergency Release
Power Requirement
Input Voltage 5 V +/- 5% (Operating) 
Audio Interface
ItemSpecification
Audio Controller Realtek ALC883 Azalia and Amplifier Maxim MAX9710 & 
MAX4411
Audio onboard or optional Built-in
Mono or Stereo Stereo
Resolution 18 bit stereo full duplex
Compatibility HD audio Interface; S/PDIF output for PCM or AC-3 
content...

Chapter 137
 Bluetooth Intel ICH9M
Wireless 802.11 b+g Intel ICH9M
PCMCIA/ 5 in 1 Card Reader OZ711MZ
Audio Codec Audio Azalia(ALC268)
LAN BCM5764M
Keyboard
ItemSpecification
Keyboard controller Winbond WPC775
Total number of keypads 84-/85-key
Windows logo key Yes
Internal & external keyboard work 
simultaneouslyPlug USB keyboard to the USB port directly: Yes
Battery
ItemSpecification
Vendor Panasonic/Sanyo/Sony/Simplo
Battery Type Li-ion
Pack capacity  6Cell 4400 MAH/8Cell 4800 MAH
Number of battery...

38Chapter 1
Temperature Range( C)
Operating
Storage (shipping)0 to +50
-40 to +60
AC Adaptor
ItemSpecification
Input  100-240V~ 1.5A, 50-60Hz/
Output 19V 4.74A 90W/19V 3.42A 65W
System Power Management
ACPI modePower Management
Mech. Off (G3) All devices in the system are turned off completely.
Soft Off (G2/S5) OS initiated shutdown. All devices in the system are turned 
off completely.
Working (G0/S0) Individual devices such as the CPU and hard disc may be 
power managed in this state.
Suspend to RAM...

Chapter 239
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if 
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 
Troubleshooting when problem arises.
To activate the BIOS Utility, press F2 during POST (when “Press  to enter Setup” message is prompted 
on the...

40Chapter 2
Navigating the BIOS Utility
There are six menu options: Information, Main, Security, Boot, and Exit.
Follow these instructions:
qTo choose a menu, use the left and right arrow keys.
qTo choose an item, use the up and down arrow keys.
qTo change the value of a parameter, press F5 or F6.
qA plus sign (+) indicates the item has sub-items. Press Enter to expand this item.
qPress Esc while you are in any of the menu options to go to the Exit menu.
qIn any menu, you can load default settings by...

Chapter 241
Information
The Information screen displays a summary of your computer hardware information.
NOTE: The system information is subject to different models.
ParameterDescription
CPU Type This field shows the CPU type and speed of the system.
CPU Speed This field shows the speed of the CPU.
IDE0 Model Name This field shows the model name of HDD installed on primary IDE master.
IDE0 Serial Number This field displays the serial number of HDD installed on primary IDE master.
ATAPI Model Name This...

42Chapter 2
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option 
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
Phoenix SecureCore(tm) Setup Utility
Main
Item Specific Help
, , or
 selects field. System Time:
System Date:
System Memory:
Extended Memory:
Video Memory:
Quiet Boot:
Network Boot:
F12 Boot Menu:
D2D Recovery:
SATAMode
F1
EscHelp
ExitSelect Item
Select Menu
Change Values
Select Sub-Menu -/+...

Chapter 243
The table below describes the parameters in this screen. Settings in boldface are the default and suggested 
parameter settings.
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is 
because the user is not allowed to control the settings in these cases.
ParameterDescriptionFormat/Option
System Time Sets the system time. The hours are displayed 
with 24-hour format.Format: HH:MM:SS 
(hour:minute:second) System Time
System Date Sets...

44Chapter 2
Security
The Security screen contains parameters that help safeguard and protect your computer from unauthorized 
use.
NOTE: Please refer to “Remove HDD/BIOS Password” section if you need to know how to remove HDD/BIOS 
Password.
Phoenix SecureCore(tm) Setup Utility
Main
F1
EscHelp
ExitSelect Item
Select Menu
Change Values
Select Sub-Menu -/+
EnterF9
F10Setup Defaults
Save and Exit
Information Security Boot Exit
Item Specific Help
Supervisor Password
controls access of the
whole setup...