Acer Extensa 2700 Service Guide

Chapter 362
 
Removing the Thermal Module
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the Keyboard” on page 61.
4.See “Removing the Fan” on page 61.
5.Disconnect the fan cable then remove the four screws fastening the thermal module.
6.Then remove the thermal module.
Removing the Processor
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the Keyboard” on page 61.
4.See “Removing the RTC...

63Chapter 3
Installing the Processor
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the Keyboard” on page 61.
4.See “Removing the RTC Battery” on page 61.
5.See “Removing the Fan” on page 61.
6.See “Removing the Thermal Module” on page 62.
7.Lift up the CPU lever, then place the CPU back to the CPU socket. Please remember to press the CPU 
lever after you put the CPU back to the socket.
Removing the Upper Case Assemly 
1.See “Removing the Keyboard”...

Chapter 364
4.Then take the upper case assembly off the main unit.
Removing the Touchpad Board
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the Keyboard” on page 61.
4.See “Removing the Upper Case Assemly” on page 63.
5.To detach the touch pad board, first disconnect the touch pad cable from the touch pad board with a 
plastic tweezers.Then release the touchpad cover lock on the back as the picture shows.
6.Remove the touchpad cover, the remove...

65Chapter 3
3.See “Removing the LCD Module” on page 55.
4.See “Removing the Keyboard” on page 61.
5.See “Removing the Upper Case Assemly” on page 63.
6.See “Removing the Touchpad Board” on page 64.
7.Remove the touchpad scroll key then remove the touchpad cable.
Removing the VGA Thermal Plate
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the Keyboard” on page 61.
4.See “Removing the Fan” on page 61.
5.See “Removing the Thermal Module” on page 62....

Chapter 366
Removing the Second Fan Bracket
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the LCD Module” on page 55.
4.See “Removing the RTC Battery” on page 61.
5.See “Removing the Fan” on page 61.
6.See “Removing the Thermal Module” on page 62.
7.Remove the three screws that fasten the second fan bracket then remove the bracket.
Removing the ODD Module(1)
1.See “Removing the Battery” on page 50.
2.Remove the screw that fastens the ODD bracket on...

67Chapter 3
Removing the HDD Bracket
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the Keyboard” on page 61.
4.See “Removing the Upper Case Assemly” on page 63.
5.Remove the four screws holding the HDD bracket, then remove the HDD bracket.
Removing the Main Board
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the Keyboard” on page 61.
4.See “Removing the Upper Case Assemly” on page 63.
5.See...

Chapter 368
.
13.Remove the two screws holding the main board as the picture shows. Remove another two screws that 
fasten the main board. Then detach the main board from the lower case carefully.
Removing the DC Board
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the Keyboard” on page 61.
4.See “Removing the Upper Case Assemly” on page 63.
5.See “Removing the Fan” on page 61.
6.See “Removing the Thermal Module” on page 62.
7.See “Removing the VGA...

69Chapter 3
3.See “Removing the Keyboard” on page 61.
4.See “Removing the Upper Case Assemly” on page 63.
5.See “Removing the Fan” on page 61.
6.See “Removing the Thermal Module” on page 62.
7.See “Removing the VGA Thermal Plate” on page 65.
8.See “Removing the CPU Heatsink Plate” on page 65.
9.See “Removing the Second Fan Bracket” on page 66.
10.See “Removing the ODD Module(2)” on page 66.
11 .See “Removing the HDD Bracket” on page 67.
12.See “Removing the Main Board” on page 67.
13.Remove the four hex...

Chapter 370
Removing the Speaker Set
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the Keyboard” on page 61.
4.See “Removing the Upper Case Assemly” on page 63.
5.See “Removing the Fan” on page 61.
6.See “Removing the Thermal Module” on page 62.
7.See “Removing the VGA Thermal Plate” on page 65.
8.See “Removing the CPU Heatsink Plate” on page 65.
9.See “Removing the Second Fan Bracket” on page 66.
10.See “Removing the ODD Module(2)” on page 66.
11...

71Chapter 3
System Upgrade Procedure
Base Unit to Wireless Unit
1.Turn out the two screws fastening the modem cover then open the cover.
2.Connect the wirless antennae.
3.Insert the wireless LAN board to the wireless socket on the main board.
4.Close the modem cover and fasten the cover with the two screws.
NOTE: You must connect the wireless antennae before you insert the wireless LAN board to the socket. If you 
insert the wireless LAN card first, the pressure you press to fasten the wireless antennae...