Acer Aspire 8942 Service Guide
Have a look at the manual Acer Aspire 8942 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 3181 StepSizeQuantityScrew Type Switch Cover (red callout)M2.5*6.5 9 Switch Cover (green callout)M2.5*4 4
182Chapter 3 Replacing the Keyboard 1.Place the keyboard face down on the upper cover. 2.Connect the Keyboard cable by inserting the cable into the Mainboard and closing the locking latch.
Chapter 3183 3.Connect the Backlight cable inserting the cable into the Mainboard and closing the FFC latch. 4.Flip the keyboard over and slide the bottom tabs into the holes in the upper cover. 5.Press the Keyboard into the Upper Cover until all the securing clips snap into place.
184Chapter 3 External Module Reassembly Instructions Replacing the WLAN Module 1.Insert the WLAN board into the WLAN socket.2.Replace the single screw to secure the module. 3.Connect the two (2) antenna cables to the module. NOTE: The black antenna cable connects to the upper terminal and the white antenna cable to the lower terminal. StepSizeQuantityScrew Type WLAN Module M2*3 2
Chapter 3185 Replacing the TV Tuner Module 1.Insert the TV Tuner as shown. 2.Connect the Antenna cable to the TV Tuner as shown. NOTE: When reattaching the Antenna, ensure the cable is tucked into the chassis to prevent damage. 3.Insert the single screw to secure the TV Tuner to the Mainboard. StepSizeQuantityScrew Type TV Tuner M2*3 1
186Chapter 3 Replacing the DIMM Modules Replacing the Hard Disk Drive Module 1.Insert the DIMM Module in place.2.Press down to lock the DIMM module in place. 1.Place the HDD in the HDD carrier.2.Replace the two (2) screws to secure the carrier. 3.Insert the HDD, interface side first, and lower it into place.4.Slide the HDD in the direction of the arrow to connect the interface.
Chapter 3187 Replacing the ODD Module 1.With the ODD tray in the eject position, replace the ODD cover on the new ODD Module. 2.Secure ODD bracket with two (2) screws.3.Slide the module in to the chassis and press until the module is flush with the chassis. 4.Replace the single screw to secure the Module.
188Chapter 3
Replacing the Lower Covers
1.Insert the Lower Cover as shown.
2.Tighten the seven (7) screws in the Lower Door.
Chapter 3189 Replacing the SD Dummy Card Push the SD Dummy into the slot until an audible click indicates that the card is correctly inserted. Replacing the Battery 1.Slide and hold the battery release latch to the release position (1), insert the battery pack and press down (2).2.Slide the battery lock in the direction shown to secure the battery in place. 1 2