Acer Aspire 8730z Service Guide
Have a look at the manual Acer Aspire 8730z Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 371 6.Remove the one screw (B) securing the locker bracket and remove the locker bracket from the optical disk drive module. StepSize (Quantity)ColorTo r q u e 1 M2 x L4 (1) Silver 1.6 kgf-cm
72Chapter 3 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List ItemScrewColorPart No. A M2 x L4 Black 86.00E34.738 B M2 x L4 Silver 86.9A552.4R0 MAIN UNIT KEYBOARD MAIN BOARD Bx1 MAIN UNIT DISASSEMBLY LCD MODULE Ax4 UPPER CASE Ax 16 CPU THERMAL MODULE CPU S C R E W X 8 Bx1 SPEAKER MODULESUBWOOFER MIDDLE COVER E-KEY BOARDFINGERPRINT MODULE B x 2 B x 2 TOUCHPAD MODULE USB MODULE POWER BOARD B x 2 B x 1 VGA CARD B x 2 MODEM CARD B x 2 Bx3
Chapter 373 Removing the Middle Cover 1.See “Removing the Battery Pack” on page 54. 2.Use a plastic screw driver to pry loose the side of the middle cover. 3.Carefully pry loose the middle cover from the latches securing it and remove the middle cover.
74Chapter 3 Removing the Keyboard 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the Middle Cover” on page 73. 3.Push up on the four latches securing the keyboard to the upper case. 4.Carefully pry loose the keyboard and turn it over on the touchpad area.
Chapter 375 5.Disconnect the keyboard cable from the main board to remove the keyboard. Removing the Power Board 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the Middle Cover” on page 73.
76Chapter 3 3.Remove the one screw (B) securing the power board to the upper case. 4.Release the power board from the latch and turn it over. StepSize (Quantity)ColorTo r q u e 1 M2 x L4 (1) Silver 1.6 kgf-cm
Chapter 377 5.Disconnect the power board cable from PWCN1 connector on the system to remove it.
78Chapter 3 Removing the Heatsink Module NOTE: There are two version of heatsink module. For this section, we are going to use the discrete model. The UMA version looks like the picture below: 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the Lower Cover” on page 56. 3.Disconnect the heatsink connector from the main board.
Chapter 379 4.Remove the eight screws securing the heatsink module in the order shown. NOTE: The green VGA board in Aspire 8730/8730Z Series is made by NVdia, while the red VGA board in Aspire 8530 Series is made by ATI. 5.Carefully lift up the heatsink module.
80Chapter 3 Removing the CPU NOTE: Aspire 8730/8730Z Series uses the Intel® processor, while Aspire 8530 Series uses the AMD® processor. But the process in removing the CPU are the same for all the models. 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the Lower Cover” on page 56. 3.See “Removing the Heatsink Module” on page 78. 4.Using a flat screwdriver, turn the CPU socket latch counter-clockwise to release the CPU.