Acer Aspire 6530 Service Guide
Here you can view all the pages of manual Acer Aspire 6530 Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 121
Chapter 3111 Replacing the Second Hard Disk Drive Module Replacing the ODD Module 1.Place the HDD in the HDD carrier.2.Replace the four screws to secure the carrier. 3.Replace the HDD and slide to the right to connect the HDD interface.4.Replace the two securing screws as shown. 1.With the ODD tray in the eject position, replace the ODD cover on the ODD Module.2.Turn the ODD over and replace the ODD bracket.
Page 122
11 2Chapter 3 Replacing the Main Hard Disk Drive Module 3.Slide the module in to the chassis and press until module is flush with the chassis.4.Replace the single securing screw as shown. 1.Replace the HDD connector.2.Place the HDD in the HDD carrier. 3.Replace the four screws to secure the carrier.4.Insert the back first and angle the HDD in place. Push down to connect the HDD interface.
Page 123
Chapter 311 3 Replacing the WLAN Module 1.Insert the WLAN board into the WLAN socket.2.Replace the two screws to secure the module. 3.Connect the two antenna cables to the module. NOTE: The White cable goes to the lower terminal and the black cable to the upper terminal.4.Ensure that the cabling is replaced as shown to avoid trapping when the covers are replaced.
Page 124
11 4Chapter 3 Replacing the TV Tuner Module Replacing the VGA Module 1.Insert the TV Tuner into the bracket as shown.2.Insert the TV Tuner in to the socket. 3.Replace the two securing screws.4.Attach the cable as shown, ensuring that the TV Tuner antenna follows the installation pattern of the LCD antenna cables. 1.Insert the VGA module into the socket as shown.2.Replace the four securing screws.
Page 125
Chapter 311 5 Replacing the DIMM Modules NOTE: To replace DIMM Module 2, first remove DIMM Module 1. In this procedure, only DIMM Module 1 is shown. Replacing the Lower Covers 1.Insert the DIMM Module flush with the connector and press down to lock in place. 1.Replace the HDD2 and Lower Covers and secure the captive screws. HDD2 Cover Lower Cover
Page 126
11 6Chapter 3 Replacing the ExpressCard and SD Card Dummy Trays 1.Insert the ExpressCard and push into the slot until flush with the chassis cover.2.Insert the SD Card and push into the slot until flush with the chassis cover.
Page 127
Chapter 411 7 Troubleshooting Common Problems Use the following procedure as a guide for computer problems. NOTE: The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses. 1.Obtain the failing symptoms in as much detail as possible. 2.Verify the symptoms by attempting to re-create the failure by running the diagnostic test or by repeating the same operation. 3.Use the following table with the...
Page 128
11 8Chapter 4 Power On Issue If the system doesn’t power on, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the following actions one at a time to correct the problem. 1.Check the power cable is properly connected to the computer and the electrical outlet. 2.Remove any extension cables between the computer and the outlet. 3.Remove any surge protectors between the...
Page 129
Chapter 411 9 No Display Issue If the Display doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: No POST or Video If the POST or video doesn’t display, perform the following actions one at a time to correct the problem. 1.Make sure that the internal display is selected. On this notebook model, switching between the internal display and the external display is done by pressing Fn+F5. Reference Product pages for specific model...
Page 130
120Chapter 4 Abnormal Video Display If video displays abnormally, perform the following actions one at a time to correct the problem. 1.Reboot the computer. 2.If permanent vertical/horizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced. See “Disassembly Process” on page 42. 3.If extensive pixel damage is present (different colored spots in the same locations on the screen), the LCD is faulty and should be replaced. See “Disassembly Process” on page 42....