Acer Aspire 5538 Service Guide
Have a look at the manual Acer Aspire 5538 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
101Chapter 3 Removing the Antennas 1.See “Removing the LCD Panel” on page 95. 2.Remove the tape securing the Microphone cable to the antenna cables. 3.Lift up the shielding holding the right Antenna cable in place. Ensure that the cable is free from all fasteners. 4.Carefully pry up the right Antenna pad, as shown, and remove the pad from the LCD Module. IMPORTANT: A strong adhesive is used to secure the Antenna pad in place. Take care not to bend the pad during removal.
Chapter 3102 5.Lift up the shielding holding the left Antenna cable in place. Ensure that the cable is free from all fasteners. 6.Carefully pry up the left Antenna pad and remove the pad from the LCD Module. IMPORTANT: A strong adhesive is used to secure the Antenna pad in place. Take care not to bend the pad during removal.
103Chapter 3 LCD Module Reassembly Procedure Replacing the Antennas 1.Adhere the Left Antenna Pad (White cable) to the LCD Cover as shown. 2.Replace the shielding to secure the left Antenna cable in place. Ensure that the cable passes under all fasteners.
Chapter 3104 3.Adhere the Left Antenna Pad (Black cable) to the LCD Cover as shown. 4.Replace the shielding to secure the right Antenna cable in place. Ensure that the cable passes under all fasteners. Replacing the Microphone 1.Push the Microphone Module in place as shown.
105Chapter 3 2.Press the cable onto the LCD cover as shown to secure it in place. Adhere the shielding tabs where they cover the Microphone cable. 3.Secure the Microphone cable under the shielding tabs along the bottom edge of the LCD Cover. 4.Apply tape to secure the Microphone cable to the antenna cables.
Chapter 3106 Replacing the LCD Brackets 1.Lift the antenna cable and slide the left LCD Bracket under the antenna cable. 2.Place the LCD bracket on the LCD cover so the LCD Cover pins penetrate the bracket. 3.Lift the antenna cable and slide the right LCD Bracket under the antenna cable.
107Chapter 3 4.Place the LCD bracket on the LCD cover so the LCD Cover pins penetrate the bracket. Replacing the FPC Cable 1.Connect the LCD cable as shown. 2.Adhere the clear adhesive tape to the LCD Panel.
Chapter 3108 3.Adhere the camera cable to the LCD Panel. Replacing the LCD Panel 1.Place the LCD Panel into of the LCD Cover back edge first, aligning the pins with the holes in the mounting tabs.
109Chapter 3 2.Insert the four screws to secure the LCD Panel to the LCD Module. Replacing the Camera Board 1.Connect the cable to the Camera Board as shown. StepSizeQuantityScrew Type LCD Panel M2*3 4
Chapter 311 0 2.Place the Camera Board into the LCD Module so that the mounting pins are aligned and press down to secure to the adhesive. NOTE: Be sure the magnet rests next to the post on the LCD cover as shown. Replacing the LCD Bezel 1.Route the LVDS cable through the cable channel and hinge cover as shown. 2.Route the Antenna cables and microphone cable through the cable channel and hinge cover as shown.