Acer Aspire 4930 4930G Series User Manual
Here you can view all the pages of manual Acer Aspire 4930 4930G Series User Manual. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 81
Chapter 371 5.Pull the optical drive module out from the main unit. 6.Remove the two screws (A) securing the ODD bracket and remove the ODD bracket from the optical disk drive module.
Page 82
72Chapter 3 7.Insert a pin in the eject hole of the ODD to eject the ODD tray. 8.Press down on the locking catch to release the ODD cover, and remove. StepSize (Quantity)ColorTo r q u e 1 M2.5 x L5 (1) Black 5 M2 x L4 (3) Black 1.6 Kgf-cm
Page 83
Chapter 373 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List ItemScrewColorPart No. A M2 x L3 Black 86.00D29.620 D M2 x L5 Black 86.00E32.725 F M2 x L4 Black 86.00F24.724 H M2.5 x L8 Black 86.00E34.738
Page 84
74Chapter 3 Removing the Switch Cover CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is recommended that only fingers are used to remove the Switch Cover. 1.See “Removing the Battery Pack” on page 60. 2.Locate and remove the two securing screws as shown. 3.Turn the computer over and open the LCD module fully to expose the Switch Cover. 4.Lift the Switch Cover as shown, leftside first. StepSize (Quantity)ColorTo r q u e 2 M2.5 x 5 (2) Black
Page 85
Chapter 375 5.Turn the Switch Cover over to expose the interface cable and detach it using the tweezers. 6.Lift the Switch Cover clear of the chassis.
Page 86
76Chapter 3 Removing the Keyboard 1.See “Removing the Battery Pack” on page 60.. 2.Push down on the two latches securing the keyboard to the upper case. 3.Lift the keyboard away from the chassis as shown.
Page 87
Chapter 377 4.Turn over the keyboard on the Touch Pad area. 5.Disconnect both sides of the keyboard cable from the mainboard to remove the keyboard.
Page 88
78Chapter 3 Removing the Antenna 1.Remove the Antenna Cables from the securing pins as shown.
Page 89
Chapter 379 2.Turn the computer over. Remove the adhesive tape from the antenna cable. 3.Feed the antenna cables from the underside of the computer.
Page 90
80Chapter 3 4.Remove the Antenna Cables from the securing pins as shown. 5.Pull the cables under the speaker panel as shown.