Acer Aspire 4730zg Service Guide
Have a look at the manual Acer Aspire 4730zg Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 351 5.Detach the WLAN board from the WLAN socket. NOTE: When attaching the antenna back to the WLAN board, make sure the cables are sitting in the housing to prevent damage.
52Chapter 3 Removing the Hard Disk Drive Module 1.See “Removing the Battery Pack” on page 44. 2.Remove the HDD cover, See “Removing the Lower Covers” on page 47. 3.Use the pull-tab to pull and lift the hard disk drive module out of the bay. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
Chapter 353 4.Remove the four screws securing the hard disk to the carrier. StepSizeQuantityScrew Type HDD Carrier M3*3 (NL) 4
Chapter 355 Removing the Optical Drive Module 1.See “Removing the Battery Pack” on page 44. 2.Remove the Memory cover. See “Removing the Lower Covers” on page 47. 3.Remove the screw securing the ODD module. 4.Carefully insert a screw driver to release the locking latch. NOTE: A plastic screw driver is recommended to prevent scratching the surface of the computer. StepSizeQuantityScrew Type ODD Module M2.5*5(NL) 1
56Chapter 3 5.Pull the optical drive module out from the chassis. 6.Remove the three screws securing the ODD bracket and remove the ODD bracket from the optical disk drive module. 7.Insert a pin in the eject hole of the ODD to eject the ODD tray. StepSizeQuantityScrew Type ODD Bracket M2*3 (NL) 3
Chapter 357 8.Press down on the locking catch to release the ODD cover and remove.
58Chapter 3 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List StepScrewQuantityColorPart No. Switch Cover M2*3 (NL) 2 Black 86.AR102.004 LCD Module M2.5*8(NL) 4 Black 86.AR102.001 M2.5*5 (NL) 2 Black 86.AR102.002 Upper Cover M2.5*8 (NL) 8 Black 86.AR102.001 M2.5*5 (NL) 7 Black 86.AR102.002 Touch Pad Bracket M2*3 (NL) 2 Black 86.AR102.004 Launch Board M2*3 (NL) 2 Black 86.AR102.004 Speaker M2*3 (NL) 4 Black 86.AR102.004 I/O Board M2.5*5 (NL) 1 Black 86.AR102.002 Bluetooth Board M2*3 (NL) 1 Black 86.AR102.004 Modem Module M2*3 (NL) 2 Black 86.AR102.004 Mainboard M2.5*5 (NL) 1 Black 86.AR102.002 Thermal Module M2.5*6.5 4 Black 86.AR102.012 CPU Fan M2*4-NI (NL) 3 Black 86.AR102.006 HDMI Module M2*4-NI (NL) 2 Black 86.AR102.006 Rem ove Switch CoverRem ove Keyboard Remove External Modules before proceeding Rem ove AntennaRem ove LCD ModuleRem ove Upper Cover Rem ove Touchpad BracketRem ove I/O BoardRem ove Launch Board Rem ove Finger Print Reader Rem ove Speaker ModuleRem ove Modem Board Rem ove Thermal Module Rem ove CPU Rem ove Switch Board Rem ove Mainboard Rem ove Bluetooth Board Upper CoverLower Cover Rem ove CPU FanRem ove HDMI Module
Chapter 359 Removing the Switch Cover CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is recommended that you only use your fingers to remove the Switch Cover. 1.See “Removing the Battery Pack” on page 44. 2.Locate and remove the two securing screws as shown. 3.Turn the computer over and open the LCD module to expose the Switch Cover. 4.Lift the Switch Cover as shown, and move from right to left side. StepSizeQuantityScrew Type Switch Cover M2*3(NL) 2
60Chapter 3 5.Turn the Switch Cover over to expose the FFC cable and detach it using the tweezers. 6.Lift the Switch Cover clear of the chassis.