Acer Aspire 4530 Service Guide
Have a look at the manual Acer Aspire 4530 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 371 6.Remove the upper cover by lifting upward from the chassis. Disconnect E as shown.
72Chapter 3 Removing the Launch Board 1.See “Removing the Upper Cover” on page 69. 2.Remove the three screws from the Launch Board. 3.Disconnect the Launch Board FFC as shown 4.Lift the Launch Board clear of the Upper Cover. StepSizeQuantityScrew Type Launch Board M2.5*4 3
Chapter 373 Removing the Speaker Module 1.See “Removing the Upper Cover” on page 69. 2.Turn the cover over and remove the four screws securing the Speakers to the Upper Cover. 3.Lift up the left speaker to allow access to the cables.Becareful not to pull damage the speaker cables. 4.Carefully lift up the mylar cover to expose the cables. Do not remove mylar completely. StepSizeQuantityScrew Type Speaker Module M2.5*4 4
74Chapter 3 5.Remove the cable from the cable channel as shown. 6.While lifting the mylar cover, pull through the finger print reader cable and touchpad FFC to expose the speaker cable. 7.Remove the cable from the cable channel.
Chapter 375 8.Remove the seven screws from the HDD plate. 9.Lift the HDD plate and continue to pull out the speaker cable. 10.Ensure the speaker cable is removed from the cable channel and lift up the right speaker. StepSizeQuantityScrew Type Speaker Module M2.5*3 7
76Chapter 3 Removing the Finger Print Reader 1.See “Removing the Upper Cover” on page 69. 2.Disconnect the Finger Print Reader cable. 3.Remove the securing screw from the Finger Print Reader board. 4.Remove the bracket. StepSizeQuantityScrew Type Finger Print ReaderM2.5*4 1
Chapter 377 5.Remove the Finger Print Reader board. Removing the Touch Pad Module IMPORTANT:The Touch Pad is integrated into the design of the Upper Cover. To replace the Touch Pad, remove all components from the Upper Cover and install an entirely new Upper Cover. 1.See “Removing the Finger Print Reader” on page 76. 2.Disconnect the TouchPad cable from the TouchPad board.
78Chapter 3 Removing the Bluetooth board 1.See “Removing the Upper Cover” on page 69. 2.Disconnect the Bluetooth cable from the mainboard. 3.Remove the single securing screw from the Bluetooth board. 4.Carefully lift the Bluetooth board from the mainboard. StepSizeQuantityScrew Type Bluetooth Module M2*3 1
Chapter 379 5.Disconnect the cable from the bluetooth board.
80Chapter 3 Removing the Mainboard 1.See “Removing the Upper Cover” on page 69. 2.Remove the two securing screws from the Mainboard. 3.Ease the casing outward and remove the mainboard, rightside first, as shown. StepSizeQuantityScrew Type Mainboard M2.5*4 2