Acer Aspire 3600 Service Guide
Here you can view all the pages of manual Acer Aspire 3600 Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 31
Chapter 125 PCMCIA Port ItemSpecification PCMCIA controller ENE CB712 Supports card type Type-II Number of slots One type-II Access location Left panel Supports ZV (Zoomed Video) port No ZV support Supports 32 bit CardBus Yes System Board Major Chips Item Controller Core logic Intel ® 915GM/PM (for Aspire 5500)/Intel® 910GML (for Aspire 3600)+Intel® ICH6-M (Mobile Intel 82801FB) VGA ATI Mobility RADEON ® X700 (for discrete models) LAN BroadCom BCM4401(10/100M for Aspire 3600); BCM5788M(1G for...
Page 32
26Chapter 1 Battery ItemSpecification Vendor & model name BATTERY LI-ION 6 CELLS-SANYO 2000mAH UR18650F BATTERY LI-ION 6 CELLS-SONY 2000mAH US18650G4 BATTERY LI-ION 6 CELLS-SANYO 2400mAH UR18650F BATTERY LI-ION 6 CELLS-SONY 2400mAH US18650G7 BATTERY LI-ION 9 CELLS-SANYO 2400mAH UR18650F Battery Type Li-ion Pack capacity 4800mAh 6cell and 7200mAh 9cell for Aspire 5500 4000mAh 6cell for Aspire 3600 Number of battery cell 53.3W 6cell and 79.9W 9cell for Aspire 5500 44.6W 6cell for Aspire 3600...
Page 33
Chapter 127 Support Color 262K colors (RGB 6-bit data driver)262,144 262,144 Viewing Angle (degree) Horizontal: Right/Left Vertial: Upper/Lower45/45 20/3545/45 20/3545/45 20/45 Temperature Range( C) Operating Storage (shipping)0 to +40 (with high humidity more than 90%RH) -25 to +600 to +40 (with high humidity more than 90%RH) -25 to +600 to +40 (with high humidity more than 90%RH) -20 to +60 LCD Inverter ItemSpecification Vendor & model name Delta DAC-07B037 B YEC YNV-C01 SumidaTWS-442-125...
Page 35
Chapter 229 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press m during POST (when “Press to enter Setup” message is prompted on the...
Page 36
30Chapter 2 Navigating the BIOS Utility There are six menu options: Info., Main, System Devices, Security, Boot, and Exit. Follow these instructions: TTo choose a menu, use the cursor left/right keys (zx). TTo choose a parameter, use the cursor up/down keys ( wy). TTo change the value of a parameter, press por q. TA plus sign (+) indicates the item has sub-items. Press e to expand this item. TPress ^ while you are in any of the menu options to go to the Exit menu. TIn any menu, you can load default...
Page 37
Chapter 231 Main NOTE: The system information is subject to different models. ParameterDescription Product Name This field displays the prodcut name of the system. Manufacturer Name This field displays the manufacturer name of the system BIOS Version This field displays the BIOS version of the system. VGA Version This field shows the VGA firmware version of the system. HDD Model Name This field shows the model name of HDD installed on primary IDE master. HDD Serial Number This field displays the serial...
Page 38
32Chapter 2 The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters. L2 Cache This field displays CPU L2 cache size. It varies in CPU type. System Memory This field reports the memory size of system base memory. The size is fixed to 640 KB. Extended Memory This field reports the memory size of the extended memory in the system. Extended memory size = Total memory size - 2MB VGA...
Page 39
Chapter 233 NOTE: The screen above is for your reference only. Actual values may differ. Insyde Software SCU May 20, 2005 5:40:09 AM Main Advanced Security Boot Exit Date and Time Power On Display ˇ Quiet Boot ˇ LCD Auto DIM ˇ Network Boot ----------------Power On Display--------------- _ F12 Boot Menu OK Cancel ˇ D2D Recovery Press key to select a control. button or...
Page 40
34Chapter 2 The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: You can also enable Acer disc-to-disc system recovery via Alt+F10 during POST. ParameterDescriptionFormat/Option Date and Time The hours are displayed with 12 hour format. The values setin these two fields take effect immediately. Quiet Boot Determines if the system will display customer logo and summary screen or not. Enable: Customer logo is displayed,...