Accusplit Stopwatch AE920HRM User Manual

ACCUSPLIT EAGLE  920HRM 
Heart Rate Monitor 
 
1.0 Introduction 
 
Thank you for your purchase. This watch includes 5 functional m odes: Current Time, Heart 
Rate Alert, Daily Alarm, Chronograph and Timer Mode. 
 
With this watch, you also get ECG accurate  heart rate readings without the use of a chest 
strap! How?  Simply put the watch on your  wrist, place two fingers on the sensors located on 
the face of  the watch, and watch your heart  rate display in the digital window  within 
seconds!...

4.0 Button Operation Summary 
 
[mode] Button 
•  Press the button to select one of the 5 functional modes   
•  In functional modes: Press and hold the button to select setting display 
•  In any setting display: Press the button  to choose between different settings. Press and 
hold the button to exit setting sequence. 
 
[start/stop] Button 
•   In Current Time Mode: press the button to select between the Date Display and Time 
Display 
•  In Daily Alarm Mode: Press the button to select between ON...

Functional Modes 
This watch includes 5 functional modes: 
1)  Current Time Mode 
2)  Heart Rate Alert  Mode 
3) Daily Alarm Mode 
4) Chronograph Mode 
5) Timer Mode. 
 
Every functional mode has one or more functional displays; these functional displays 
provide the supplementary information  to the corresponding functional mode. 
 
To Switch among the Functional Modes and Displays 
To select among the above functional modes, press the [mode] button following the adjacent 
diagram. 
 
6.0 Current Time...

6.1 Setting the Current Time Mode 
 
  
To Set the Current Time Mode 
To set the current time and date, and their display formats, press and hold the [mode] button 
for about 2 seconds to select the setting di splay (the second digits will start flashing). 
 
The Setting Sequence 
•  When the seconds digits start to flash, press the [mode] button to move the flashing 
following the setting sequence of the adjacent diagr am or press the [start/stop] or [reset] 
button to reset the second digits to zero....

7.0 About Heart Rate Measurement 
 
 
  
In exercise or sports, your heart naturally speeds up in pumping blood to the body in 
accordance with your increased energy level. This watch can calculate that increase 
expressed as the number of beats per minutes (bpm) to determine a safe target heart rate 
for each individual. 
 
PRECAUTIONS/TIPS 
 
1.  A heart rate sensor is located on the back of the watch.  The back sensor must make 
firm contact with the users skin during measurement. 
 
2. DO NOT take...

7.1 Heart Rate Measurement 
 
 Heart Rate Measurement 
 
•  In any functional mode, press the 6:00 sens or with your index finger and your middle 
finger place on the 12:00 sensor located on the face of the watch. 
 
•   Rest your thumb on the side of your wris t. Make sure the sensor on the back of the 
watch sits firmly on your skin. 
 
•   You will hear a beep tone once your heart rate has been acquired (this usually take 5-8 
seconds). 
 
•  Remove your fingers from the s ensors and view your heart...

8.0 Heart Rate Alert Function 
 
 About the Heart Rate Alert Function 
 
•  By presetting a target heart rate range, y ou can activate the heart rate alert function. 
This function helps prevent the user from going over or under a target heart rate. 
 
•   In course of doing exercise or sports:  When the user takes a heart rate measurement 
that is out of the preset desirable range, th is watch will beep twice. Hence, the user 
could render the appropriate actions such  as slow-down or speed up the...

8.1 Heart Rate Alert Mode 
 
 
 
When Heart Rate Alert Function is ON 
 
The following displays will be appeared on the display every 2 seconds: 
1)  Upper Limit Display - the preset upper limit that set for the heart rate alert function 
2)  Lower Limit Display - the preset lower limi t that set for the heart rate alert function 
3)  Age and Gender Display (see note 1) - the age and gender that set for the upper and 
lower limit calculation. 
 
When Heart Rate Alert Function is OFF 
The --- and oF...

8.2 Setting the Heart Rate Alert Mode 
 
 To Set the Heart Rate Alert Mode 
To preset your target heart rate: 
1)  I npu t  your  targ et  h ear t ra te  ran ge  (l ower  and upper limits), or 
2)  Input your age and gender (lower and upper limits will be automatically 
calculated). 
 
To set the heart rate alert mode, press and  hold the [mode] button for about 2 seconds to 
select the setting display (the  age digits will start flashing). 
 
The Setting Sequence 
•  When the age digits start to flash,...

9.0 Daily Alarm Mode 
 Daily Alarm Mode 
•  The Alarm Time (hours, minutes) appears on the display. 
 
To Turn the Daily Alarm ON and OFF 
•  Press the [start/stop] button  once to choose ON or OFF. 
•  When the Daily Alarm Indicator    appears (the daily alarm is ON), the watch starts beeping 
at the alarm time for about 30 seconds. 
 
To Turn the Hourly Chime ON and OFF 
•   Press the [reset] button once to choose ON or OFF. 
•  When the Hourly Chime Indicator    appears (the hourly chime is ON), the...