Acco Nobo Digital DLP Projector X17E User Manual

Problem: No image appears on screen
Ensure all the cables and power connections are correctly and  
  securely connected as described in the “Installation” section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please  
refer to the “Replacing the lamp” section (page 35).
Make sure you have removed the lens cap and the projector is  
 switched on.
Ensure that the “Hide” feature is not turned on.
Problem: Partial, scrolling or...

  5.  Select the “Change” button under the “Monitor” tab .
  6.  Click on “Show all devices.” Next, select “Standard monitor  
    types” under the SP box; choose the resolution mode you need  
    under the “Models” box. 
  If you are using a Notebook:
  1.  First, follow the steps above to adjust resolution of the    
  computer.
  2.  Press the toggle output settings. example:[Fn]+[F4]
  If you experience difficulty changing resolutions or your    
  monitor freezes, restart all equipment including the...

  Make sure the projection screen is between the required distance 4.9  
to 39.4 feet (1.5 to 12.0 meters) from the projector (refer to page 14).
Problem: The image is stretched when displaying 16:9 DVDThe projector automatically detects 16:9 DVD and adjusts the aspect 
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect 
ratio by referring to the following:
Please select 4:3 aspect ratio type on your DVD player if you are...

Appendices
Problem: Message Reminders
Fan failed: 
Over temperature:  
Replacing the lamp:
Password error :  
Time out:  
34
English ...
Appendices




 

35
... English
Appendices
Replacing the lamp
The projector will detect the lamp life itself.  It will show you a 
warning message 
“
”
When you see this message, change the lamp as soon as pos-
sible.
Make sure the projector has cooled down for at least 30 
minutes before changing the lamp. 
Warning: Lamp 
compartment is hot!
Allow it to cool down 
before changing lamp!
Warning: To 
reduce the risk of 
personal injury, do not 
drop the lamp module 
or touch the lamp bulb. 
The bulb may shatter 
and cause...

Remark : 
1.> “
*”compressed 
computer image.
2.> The column of Digi-
tal is support DVI-D 
connector.
Compatibility Modes
Mode Resolution(ANALOG)V.Frequency
(Hz)H.Frequency
(kHz)
VESA VGA 640 x 350
70 31.5
VESA VGA 640 x 35085 37.9
VESA VGA 640 x 40085 37.9
VESA VGA 640 x 48060 31.5
VESA VGA 640 x 48072 37.9
VESA VGA 640 x 48075 37.5
VESA VGA 640 x 48085 43.3
VESA VGA 720 x 40070 31.5
VESA VGA 720 x 40085 37.9
VESA  SVGA 800 x 60056 35.2
VESA SVGA 800 x 60060 37.9
VESA SVGA 800 x 60072 48.1
VESA SVGA...

Please note that 
damage resulting from 
incorrect installation 
will invalidate the war-
ranty.
Ceiling Mount Installation
1.  To prevent damaging your projector, please use the ceiling 
mount package for installation.
2.  If you wish to use a third party ceiling mount kit, please 
ensure the screws used to attach a mount to the projector 
meet the following specifications:
Screw type: M2.6
Maximum screw length: 10mm
Minimum screw length: 8mm

37
... English
Appendices