Home > Aaxa > Projector > Aaxa Projector P4 User Manual

Aaxa Projector P4 User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Aaxa Projector P4 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 39 Aaxa manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 36
    Add page 31 to Favourites
    image text
    Enable zoom 
    							Setup Menu
28
The Settings Menu can be accessed by selecting “Settings”on the ma\
in menu
Sound & DisplayVolume Settings • Allows the raising or lowering of volumePicture Adjustment• Brightness, backlight and color temperature op-tionsIMAGE FLIP• Flips image upside down (for rear projection)
Date and Time
• Adjust Date and Time 
Language & Keyboard
• The projector allows you to choose from different 
languages
• To choose the language of your choice, highlight 
the language you want and press play. 
Disk Usage
• Displays total memory used on the P4’s onboard 
memory as well as an SD card if inserted
There are 4 menus in the settings menu
    Add page 32 to Favourites
    image text
    Enable zoom 
    							Technical Details
29
Chapter 4
IMAGE IS BLURREDPossible CausesSolution
The Projector is not in focusAdjust the focus with the focus adjustment dial until the image comes into focus
The Projector is offset from plane / angle of operationMove the projector so that it is both 180 degrees and on an evern plane with the screen.
No Sync, No Signal
Troubleshooting
1. Be sure to setup the computer to enable a video signal output.  On 
some laptops this is done by pressing and holding Function F5 key.  If 
using the P4 as an external monitor on Windows based systems, this 
can be done by selecting “extend my desktop to this monitor”.  The 
native resolution of the p4 projector is 858x480 and accepts up to 
1024x768.  Depending on the video driver different resolutions may 
need to be selected for proper output.
    Add page 33 to Favourites
    image text
    Enable zoom 
    							Technical Details
30
THE PROJECTOR DOES NOT TURN ONPossible CausesSolution
There is no powerCheck to ensure the power outlet or battery source is good.  check the power adapter to ensure a proper connection with the wall outlet as well as the proejctor.  Confirm that the unit is charged and has enough power
The power button was not held long enoughTo power on the projector, the power button needs to be depressed for a full 3 seconds.  try holding the power button until the optical engine turns on
NO PICTURE / FILE NOT SUPPORTEDPossible CausesSolution
The video source is not properly connected or selectedCheck the video source signal to ensure that it is properly connected.  Select the current input source by choosing the input desired from the main menu
Incorrect file extension / Video is encoded with incorrect codecPlease refer to “Specifications” page to see which file types and codex are supported.  Verify that the file was encoded properly.
Troubleshooting
    Add page 34 to Favourites
    image text
    Enable zoom 
    							Specifications
31
Brightness 
Native Resolution
Maximum Resolution
Contrast Ratio
Projectoin Lens:
Image Size: 
Lamp: 
Video in:
Audio Output:
SD Card
 
USB:
Dimensions 
Weight
Supported File Formats
80 Lumens 
WVGA(858x480)
WXGA(1280x800)
2000:1 
Manual Focus
10~80 inches 
20,000 hour RGB Triple LEDs 
Composite A/V
VGA(mini-VGA)
1.0 W stereo speakers
3.5 mm audio jack
SD-HC Card Slot
(32GB maximum) 
USB OTG (On-the-Go)
(Memory Sticks)
USB Data Transfer
172x71x31mm 
0.5 lbs
AVI, MPG. MP4 MP3, 
FLV, RMVB, RM, JPG
    Add page 35 to Favourites
    Enable zoom
    Add page 36 to Favourites
    image text
    Enable zoom 
    							Please direct all customer service inquiries to:
AAXA Technologies, Inc.
103A East Alton
Santa Ana, CA 92707
(714) 957-1999
[email protected]
    All Aaxa manuals Comments (0)

    Related Manuals for Aaxa Projector P4 User Manual