Aaxa Projector P4 User Manual

							Connecting to a Computer
Connect the large end of the 
8
VGA Cord
to your computer’s
VGA Adapter
Connect the small end of the
VGA Cord
to your P4’s 
VGA Adapter
Step 1:
Step 2:
Step 3:
Select “Source” Change resolution
Then
In the Main Menu  
						

							Connecting to a Computer Cont.
Step 4:
Enabling VGA output on your Computer – To enable VGA output on your computer most computers require “turning on” the video output feature.  Each com\
puter is different.  Please consult your owner’s manual for instructions to enable VGA output.  Below are standard instructions for a Windows XP computer – not all systems are the same.
Press function & “F5” to instruct the computer to enable multiple displays.You can also press Windows+P to toggle through display settings.
*NOTE: different operating sys-tems may differ
Step 5:
1. Right click on computer desk-top and select “Properties”2. Display Properties window will pop up3. Click on the “Settings” Tab4. If a secondary monitor is grayed out, click on it and check “Extend my Windows Desktop onto this monitor”5. If the image is blurry or the text  is not legible, adjust the screen resolution.  We recommend 800x600 or 1024x768.  
Step 6:
9 
						

							Connecting to Composite Video
Connect one end of the
Composite Cord
to your P4’s
A/V Adapter
Connect opposite end ofto your devices 
Step 1:
Step 2:
Composite CordComposite Cord
10 
						

							Connecting to Composite Video Cont.
Connectivity with multimedia devices
The P4 can connect to many media devices including: iPod, iPhone, iPad, \
VHS 
players, DVD players, smart phones, cameras, video game consoles and oth\
er 
peripherals with ease.
*Apps on smart phones require video out capabilities to be displayed wit\
h the P4.11
Step 3:
Select “Source” 
In the Main Menu 
Choose Composite Video
Then
Turn on your multimedia device.
Step 4: 
						

							Step 3:
Turn on your multimedia device.
Step 4:
Connecting Speakers/Headphones
Connect your speaker
or headphones 
12
3.5 mm cord 
to your P4’s
Speaker Adapter
Step 1:
Step 2:
Caution for Earphone (Earplug) Use• Prolonged use at high volume may impair your hearing.
Ensure the power and  volume on your 
speaker or headphones is turned on
Step 3:
Place headphones/earphones in/over ears 
						

							Connecting Keyboard/Mouse
Connect your key-board/mouse combo’sUSB Adapter
to your P4’s
USB Input
Step 1:
Mouse Touchpad
Left Click
Right Click
Remove the USB Adapter from the back of your Key-board /mouse combo
Step 2:
Step 3:
Move the ON/Off Switch on the side of the combo. 
13
Step 4:
Press the “red” button to sync the wireless usb adapter to the key\
board.  
						

							Connecting Keyboard/Mouse
Optional Keyboard and Mouse can be purchased directly from AAXA Technologies at www.aaxatech.com
A USB mouse can be used to select most options on the P4.  • To move the cursor, place 1 finger on the pad located on the right and move your finger in the direction you wish to move the mouse.• Hover over your selection and click the left mouse button.• A keyboard can be used in the “desktop” feature.Please refer to the “Desktop section of the manual for a more detaile\
d explanation.
Wireless Signal
14 
						

							Computer Data Transfer Only
Connect small end of the
15
USB Adapter
to your P4’s
Micro USB Input
to your computer’s 
Step 1:
Step 2:
Connecting your P4 to your computer for data 
transfer allows you to add files to store onto the 
onboard memory.  This will allow you to play files 
with your P4 as a standalone device.
USB AdapterUSB Port
Connect opposite end of  
						

							USB Port
Computer Data Transfer Only
16
Step 3:
Turn On the P4 and open the“Open to view files” 
that autoplays.
NAND hardrive
OR
Step 4:
Place files in appropriate folders
Video files go here
Music files go here
Image files go here
Note.  If your computer fails to detect the projector, check to make sure the cable is se-curely inserted on both sides.  If you’re still unable to view the fo\
lder, please consult with 
your operating system’s owner manual. 
						

							How to Save Files to your Sd or USB 
17
Video files go here
Music files go here
Image files go here
In order to correctly display your media files SD or USB, the  files must be placed in the 
correct folder. 
Step 1:
Create folders “movie”, “music”, and “picture” in all lowercase.To do this, right click on your mouse on an empty space in your SD or USB’s main folder.   
Step 2:
Place files in appropriate folders