Home > Aaxa > Projector > Aaxa Projector P300 Pico Projec User Manual

Aaxa Projector P300 Pico Projec User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Aaxa Projector P300 Pico Projec User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 39 Aaxa manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Technical Details
    39
    Chapter 4
    IMAGE IS BLURREDPossible CausesSolution
    The Projector is not in focus Adjust the focus with the focus adjustment dial 
    until the image comes into focus
    The Projector is offset from plane / angle of 
    operation Move the projector so that it is both 180 degrees 
    and on an evern plane with the screen.
    No Sync, No Signal
    Troubleshooting
    1. Be sure to setup the computer to enable a video signal output.  On some 
    laptops this is done by pressing and holding Function F5 key.  If using the 
    P300 as an external monitor on Windows based systems, this can be done 
    by selecting “extend my desktop to this monitor”.  The native resolution of 
    the P300 projector is 1280x800.  Depending on the video driver different 
    resolutions may need to be selected for proper output. 
    						
    							Technical Details
    40
    THE PROJECTOR DOES NOT TURN ONPossible CausesSolution
    There is no power Check to ensure the power outlet or battery 
    source is good.  check the power adapter to 
    ensure a proper connection with the wall outlet 
    as well as the proejctor.  Confirm that the unit is 
    charged and has enough power
    The power button was not held long enough To power on the projector, the power button 
    needs to be depressed for a full 3 seconds.  try 
    holding the power button until the optical engine 
    turns on
    NO PICTURE / FILE NOT SUPPORTEDPossible CausesSolution
    The video source is not properly connected or 
    selected Check the video source signal to ensure that it 
    is properly connected.  Select the current input 
    source by choosing the input desired from the 
    main menu
    Incorrect file extension / Video is encoded with 
    incorrect codec Please refer to “Specifications” page to see which 
    file types and codex are supported.  Verify that 
    the file was encoded properly.
    Troubleshooting 
    						
    							Specifications
    41
    Brightness 
    Native Resolution
    Maximum Resolution
    Contrast Ratio
    Projectoin Lens:
    Image Size: 
    Lamp:
     
    Video in:
    Audio Output:
    SD Card
     
    USB:
    Dimensions 
    Weight300 Lumens 
    1280x800(WXGA)
    1920x1080(1080P)
    2000:1
     
    Manual Focus
    10~120 inches  
    Triple RGB LEDs with Vibrant Color 
    Technology Life 15,000hrs 
    Composite A/V
    VGA(mini-VGA)
    HDMI(mini-HDMI)
    1.0 W stereo speakers
    3.5 mm audio jack
    MicroSD Card Slot
    (32GB maximum)  
    USB Host
    (Memory Sticks)
    149x99x40mm  
    0.5 lbs 
    						
    							Please direct all customer service inquiries to:
    AAXA Technologies, Inc.1541 Parkway LoopTustin, CA 92780(714) 957-1999
    [email protected] 
    						
    All Aaxa manuals Comments (0)

    Related Manuals for Aaxa Projector P300 Pico Projec User Manual