Aaxa Projector P1 Jr User Manual

							To access data from the SD Card slot:
 a. Insert the SD Card as shown. The gold connectors on the   
     card should face down. Maximum of 8GB SDHC cards 
     are supported.
 b. Access the SD Card Memory menu from the main menu.
 c. Select one of the icons to access related data on the SD card.
10
SD Card Memory  
						

							Videos
Selecting the video menu brings up the video 
selection submenu seen on the right. To 
navigate to a video, press the joystick up and 
down. To select and play a video, click the 
joystick. For compatible video formats, please 
see the specifcations page. 
During playback, the joystick controls are:
Volume Control: Right/Left
Fast-Foward/Rewind: Up/Down 
  Speeds of 2x, 4x, 8x, 16x, 32x; to play at 
  normal speed, cycle through all speeds
Open Video Playback Menu: Enter
Stop: Escape
After the menu is opened, use the joystick 
to operate the following controls:
  1. Previous  5. Next
  2. Rewind  6. Stop
  3. Play / Pause  7. Repeat / Shufe / Cycle
  4. Fast-Forward  8. Brightness / Contrast 
11
SD Card Memory  
						

							Photos
Photos will initially be seen in thumbnail mode. 
Selecting a photo will begin displaying the 
pictures in slideshow mode (bottom right).
The slideshow can be customized in the 
Settings Menu. Please see the Slideshow page 
to see what settings can be customized.
During the slideshow, joystick controls are:
Previous/Next: Left/Right
Pause: Enter the slideshow submenu by clicking 
on the joystick to bring up the submenu. Select 
play / pause by clicking on the joystick.
Open Slideshow Controls: Enter (below)
Exit: Escape
Use the joystick to operate the controls once 
the menu has been opened.       
1. Previous  5. Zoom
2. Play / Pause  6. Repeat / Shufe / Cycle
3. Next    7. Brightness / Contrast
4. Stop
     
12
SD Card Memory  
						

							Music
To listen to music on the P1 Jr., select the Music 
icon. A list of available music fles will appear. 
Click on the desired song to begin playing. 
Move the joystick up and down to navigate 
between songs. To select a song, press enter
(click on the joystick). 
During playback, joystick controls are:
Volume Control: Left/Right
Previous/Next Song: Up/Down
Opens Control Menu: Enter
Stop/Exit: Escape
*Note: The above controls only apply when the control menu is not open.
Use the joystick to operate the controls once the menu has been opened.
  1. Previous  4. Stop
  2. Next    5. Repeat 1 / Repeat All / Shufe
  3. Play / Pause
     
SD Card Memory
13  
						

							SD Card Memory
SD Card Memory
Files
The fle menu allows for browsing and deletion 
of the fles currently on the SD card. Click on 
the Files icon from the main menu to enter 
the submenu. To navigate through the list, 
press up and down on the joystick. To delete 
a fle, select it from the list by clicking on the 
joystick. This will give you the option to delete. 
To view the fle properties, select the fle and 
it will appear on the right.
     
14
SD Card Memory  
						

							The P1 Jr has the ability to read data from a USB OTG (On-The-Go) enabled device (such devices include cell 
phones, fash drives, etc). This allows the user to view the data stored on the USB OTG enabled device from 
the P1 Jr. 
To access the data on your USB OTG device, plug your USB device to the back of the P1 Jr (shown below). 
Once the connection is made, select USB Data from the main menu and the data will appear. You should 
now be able to access the data on your device. 
If the data does not appear, try reconnecting the device. If that does not resolve the issue, check with your 
device manufacturer to confrm that the device is a USB OTG device.
     
15
USB Data Display              
						

							Settings Menu
The Settings menu can be accessed through the main 
menu by selecting the Setup icon. This submenu allows 
the user to customize the P1 Jr. 
Slideshow – The slideshow setting allows the user to 
change the speed, transition style, and display mode of 
the slideshow. Please see the slideshow section to see 
more details about changing the settings. 
Language – Supported languages include: English, 
       French, German, Italian, Spanish
Keystone – The P1 Jr.’s keystone settings can be changed here. 
Please see the Keystone section on the following page to see how this afects the image. 
About - Selecting this will display general information about the projector. 
Reset - Selecting this will restore the projector to the factory defaults.
16  
						

							Slideshow
Slide show speed – Controls how long each picture is viewed. 
Intervals range from 3 seconds - 5 minutes. 
Transition - Controls the transition between each picture. 
Display mode - “Fit to screen” will compres or enlarge the 
picture to the native resolution of the projector. Pictures 
may become distorted when compressed or enlarged.
“Normal” will display pictures in their actual resolution. 
Keystone 
The P1 Jr.’s keystone settings will only afect vertical keystone. This means only the top and bottom of the 
image may be adjusted. Press the joystick left or right to change the keystone.
17
Settings Menu  
						

							18
Troubleshooting
THE PROJECTOR DOES NOT TURN ON
Possible Causes
There is no power
The power button was not held long enough
NO PICTURE / FILE NOT SUPPORTED
Possible Causes
The video source is not properly connected or selected
Incorrect fle extension / Video is ecoded with incorrect codec
IMAGE IS BLURRED
Possible Causes
The projector is not in focus 
Image appears stretched when connected to an external device.
Solution
Check to ensure the power outlet or battery source is good. Check the power 
adapter to ensure a proper connection with the wall outlet as well as the Projector. 
Confrm that the unit is fully charged and has enough power.
To power on the projector, the power button needs to be depressed for a full 3 
seconds. Try holding the power button until the optical engine turns on.
Solution
Check the video source signal to ensure that it is properly connected.
Select the correct input source by choosing the input desired from the main menu.
Please refer to “Specifcations” page to see which fle types and codecs are 
supported. Verify that the fle was encoded properly. 
Solution
Adjust the focus with the focus adjustment dial until the image comes into focus.
Verify the output setting on the device is confgured to 4:3 aspect ratio.
Troubleshooting  
						

							PROJECTION SYSTEM
Projection Lens:     Manual Focus
Projection Image:     10 ~ 50 inches
Lamp:       Single Chip White LED
      15,000 Hours
 
GENERAL SPECIFICATIONS 
Audio Output:     Onboard 1w Mono speaker
Supported Languages:   English, French, German, 
      Italian, Spanish
Aspect Ratio Control:   4:3
Dimensions:     105*56*20mm
Weight:       126g
Power Consumption:   5V, 2000mA, 6 Watts
Power Supply:     AC100~240V(Free Voltage)
      50Hz/60Hz
Conformances:     CE, UL
 
INPUTS / OUTPUTS 
Video In:      Composite A/V (2.5mm Jack)
USB:       Mini USB Port
SD Card:      SDHC (8GB maximum)
 SUPPORTED FORMATS
Video: AVI; MP4; MPG; 3GP; RMVB; RM; 
  VOB; DAT
Video Codecs: DivX; XViD; MPEG-2; MPEG-4;  
  RV (8/9/10)
Audio Files: MP3
Audio Codecs: AAC; MPEG2; MPEG4;
Images:  JPG
19
Specifcations