Aaxa Projector P1 Jr User Manual

							Table of Contents........................................................................\
..............................1
Warnings ........................................................................\
..............................................2
Accessories ........................................................................\
..........................................3
General Operation 
  Turning the Projector On/Of ..........................................................4
 Projector Description ........................................................................\
.5
  Focus Adjustment / Throw Distance ............................................6
  Tripod Adapter ........................................................................\
...............6
Input / Output ........................................................................\
....................................7
Menu System
  AV Input ........................................................................\
.............................8
  SD Card ........................................................................\
...............................9-14
  USB Data ........................................................................\
...........................15
  Settings ........................................................................\
..............................16-17
Troubleshooting ........................................................................\
...............................18
Specifcations ........................................................................\
.....................................19
Table of Contents
1  
						

							  Congratulations on purchasing the world’s smallest LCOS pico projector with media player! 
The P1 Jr. pico projector features a bright 11 lumen projector with built-in media player capable of 
projecting videos, pictures, and media of up to 50”*.  Combined with its 1 hour internal battery the P1 Jr. 
pico projector is the ultimate portable entertainment device! In this manual you will fnd instructions on 
how to use your P1 Jr. pico projector.
* Notice: The P1 Jr is designed to be used in dark areas only – use in lit areas is not recommended.
 
Warning: Please use this product as instructed to prevent any injuries.
Do not operate the projector in moist or wet    Avoid extreme temperatures as this 
environments. Exposure to water may      may damage the projector.
cause electrical shock.
Caution Lithium Ion Battery onboard.       Avoid using the projector if damaged. 
Do not dispose of improperly or expose       Taking apart the projector is not  
to extreme heat.          recommended and will void the 
      warranty.    
     
P1 Jr. Pico Projector
2  
						

							USB Cable       AC Adapter/Charger
AV Cable           Adjustable Tripod
* Note: Actual accessories may appear diferent from those 
               shown above.
P1 Jr. Projector
3
Package Contents  
						

							Turning On the Projector
Press and hold the power button for 3 seconds to turn the 
projector on. The welcome screen should appear while the 
projector is loading and will automatically load into the 
onboard media player.
Note:  Please make sure the P1 Jr is fully charged before use.  
Charge time can be up to 3-4 hours. To charge the projector:
     1. Attach the power adapter to the projector 
     2. Attach the power adapter to the wall outlet 
Turning Of the Projector
Hold the power button for 3 seconds until the optical engine
turns of.
        
        
        
        
4
General Operation  
						

							       1. Projection lens
       The projection lens emits the image from the 
       projector. Make sure there is nothing obstructing the 
       lens to obtain a clear image. 
       2. Focus adjustment
       If the projected image is not in focus, move the ring 
       to the left or right to bring the image into focus. A 
       clear picture can be acheived at a distance of 10” - 90“.
       Please see page 6 for focus and throw distances.
3. Joystick
Use the joystick to navigate through each menu. The joystick behaves 
diferently in each submenu. The diagram below depicts the language 
used in the rest of the manual to describe the functionality of the joystick. 
4. Escape (ESC)
In most scenarios, the escape button exits from the current menu to 
the top level menu. Please see each menu section to learn more about 
this button.
5
General Operation  
						

							Tripod Adapter
Insert the tripod to the bottom of 
the projector as shown to the left. 
Confrm that the tripod is securely 
fastened before turning on the 
projector.
General Operation
6
Focus Adjustment / Throw Distance
The focus can be adjusted by turning the wheel located at 
the front of the projector. The projector is capable of the 
distances specifed on the right.  
						

							1. A/V Port – The P1 Jr. can project 
    video from standard composite 
    video sources. A resolution of 
    720x480 can be supported. Please 
    see page (8) for more information 
    about AV Input Devices. 
2. Power Button - To turn on/of the projector,
    press this button for 3 seconds. 
3. Mini USB Port – The Mini USB port is designed for data input from USB OTG devices. Please see the USB 
    Data description on page 14 to learn more. 
4. Projector Power – The P1 Jr. accepts 100-240V 50-60hz power at 2000ma. The charge receptacle is 
    found on the back of the projector.  The P1 Jr. can be operated during charging.
      5. SD Card – The P1 Jr. can accept up to 
                8GB SD Cards.  For accepted fle formats 
                please see the specifcations page (19) for 
                additional information.
Inputs / Outputs
7  
						

							The AAXA P1 Jr. pico projector features an onboard 
media player complete with onboard menu system.  
The onboard menu system allows the user to select 
from diferent video inputs as well as video and 
picture playback.  
AV (Audio / Video) Input 
Selecting the AV input will enable the P1 Jr. to display 
video from a device connected to the AV port. Input 
resolution can be either NTSC or PAL of up to 
720x480 video resolution.
a. To connect an A/V cable, insert the 3.5mm portion 
     into 3.5-2.5mm adapter. Place that in to the A/V 
     port of the projector and the other end to 
     external device. 
Menu System
8  
						

							Menu System
AV (Audio / Video) Input (cont’d)
 b. Click on the “AV input” icon in the main menu. A blue screen will appear and the projector will be ready 
     to accept an A/V signal. 
 c. Turn on the external device and make sure it is properly set up to output video.
 d. Possible A/V sources: Standard Composite (included), iPod/iPhone, HTC Series, Nokia Series, DVD Player 
      (non Bluray / HD), Cable Box (non HD), Nintendo Wii (composite only), Microsoft Xbox (composite only), 
      Sony Playstation (composite only). You may purchase the cable necessary to connect your external 
      device from AAXA or your AAXA dealer. Please see your device’s instruction manual for more 
      information. Please ensure your device has video output capabilities. For example some cell phones 
      have the video output feature blocked.
SD Card
Selecting the SD Card input opens a submenu to allow you to select the type of data you would like to 
access. The submenu includes access to: Videos, Photos, Music and Files. Please see the SD Card Memory 
section on page 10 to see the menu items. 
USB Data
Selecting the USB Data input will allow the user to access data on their USB OTG (On-The-Go) device. Please 
see the USB Data section on page 15 for additional information. 
Setup
Selecting the Setup option allows the user to change various settings on the P1 Jr. Please see the Settings 
9
Menu System