Aaxa Projector Led Pico User Manual

Setup Menu
29
The Settings Menu can be accessed by selecting “Settings”on the ma\
in menu
Picture• Picture Mode• Color Temperature
• Aspect Ratio 
Sound• Sound Mode• Balance• Auto Volume• Surround Sound
• EQ
Time• Clock• Off Time
• Sleep Timer
Option• OSD Language• Restore Factory Default• Blending
• OSD Duration
Within the settings menu there are 
four more submenus that allow you 
to customize your LED Pico to the 
settings you want. 

Picture Settings
30
Picture Mode
• Changes the picture mode to 
different settings depending on 
your choosing.
Color Mode
• Adjusts the color temperature 
from hot to cool (red to blue).
Slideshow Time
• Adjusts the time between 
photos when in slideshow 
mode
Aspect Ratio
• Adjusts the image’s aspect 
ratio from 16:9 to 4:3
Upgrade
• Upgrades the LED Pico’s 
firmware
*Caution: Some pictures may be cut off when aspect ratio is set incorrectly 

Sound Settings
31
Sound Mode
• Change the sound mode depend-
ing on what is currently playing.
Balance
• Adjusts the balance of the sound, 
from left to right.
Auto Volume
• Sets the projector to auto-detect 
for the volume. The projector will 
auto detect the appropriate sound 
mode.
Surround Sound
• Adjusts the surround sound capa-
bilities of the projector. 

Time Settings
32
Clock
• Adjust the time/date.
Off Time
• Sets a time for auto turn off of 
projector
On Time
• Sets a time for the projector to 
auto turn on.
Sleep Timer
• Sets a timer until the projector to 
go into sleep mode
Auto Sleep
• Sets the auto sleep of the unit. 

Option Settings
33
OSD Language
• Changes the language of the 
device.
Restore Factory Default
• Restores the projector to factory 
settings.
OSD Duration
• Allows the projector to set a 
duration for the selected OSD 
language.
Soft Version
• Lists the firmware version your 
LED Pico is running 

Technical Details
34
Chapter 4
IMAGE IS BLURREDPossible CausesSolution
The Projector is not in focusAdjust the focus with the focus adjustment dial until the image comes into focus
The Projector is offset from plane / angle of operationMove the projector so that it is both 180 degrees and on an evern plane with the screen.
No Sync, No Signal
Troubleshooting
1. Be sure to setup the computer to enable a video signal output.  On some \
laptops this is done by pressing and holding Function F5 key.  If using...

Technical Details
35
THE PROJECTOR DOES NOT TURN ONPossible CausesSolution
There is no powerCheck to ensure the power outlet or battery source is good.  check the power adapter to ensure a proper connection with the wall outlet as well as the proejctor.  Confirm that the unit is charged and has enough power
The power button was not held long enoughTo power on the projector, the power button needs to be depressed for a full 3 seconds.  try holding the power button until the optical engine turns on
NO...

Specifications
36
Brightness 
Native Resolution
Maximum Resolution
Contrast Ratio
Projectoin Lens:
Image Size: 
Lamp:
 
Video in:
Audio Output:
SD Card
 
USB:
Dimensions 
Weight
25 Lumens 
960x540 (qHD)
1920x1080(1080P)
1000:1 
Manual Focus
10~50 inches 
Triple RGB LEDs with Vibrant Color 
Technology Life 15,000hrs 
Composite A/V
HDMI(mini-HDMI)
1.0 W speaker
3.5 mm audio jack
MicroSD Card Slot
(32GB maximum) 
USB Host
(Memory Sticks)
115mm x 62mm x 20mm 
0.6 lbs 

Please direct all customer service inquiries to:
AAXA Technologies, Inc.
1541 Parkway Loop
Tustin, CA 92780
(714) 957-1999
[email protected]