Aaxa Projector Led Pico User Manual

							aaxa
TECHNOLOGIES
User Guide 
						

							Caution!
WARNING:  Please use this product as instructed.  Misuse may cause 
injury or death.
DO NOT use while driving
DO NOT expose to water or wet 
surfaces.  Electric shock may occur.
DO NOT expose the projected LED 
image to your eyes or the eyes of 
others
 
DO NOT block or restrict airflow 
from ventilation holes as this may 
cause the projector to overheat
Keep the projector, battery, or  
charger away from any heat sources
Caution for Battery Use• Do not pierce or puncture the battery with sharp objects• Do not heat the product or expose it to high temperature.• Do not wet it or place it in any liquid
Caution for Headphone Use• Prolonged use at high volume may impair your hearing.• High volume during walking or driving may cause distractions and result in injury or death 
						

							Table of Contents
Chapter 1: LED Pico at a glance
Main Unit Front/Back
Keypad
Accessories 
Chapter 2: Getting Started
Powering On / OFF
Focus Adjustment  / Throw 
Distance
Connecting to a Computer HDMI
Connecting to Composite Video
Connecting to HDMI Video
Connecting to Speaker or Head-
phones
Connecting a Micro SD Card
1
2
3
4
5
6
7
9
11
13
14
16
18
19
21
22
24
25
27
28
29
34
35
36
Connecting to a USB Host
Chapter 3: Menu Screens
Main menu
Video Player Menu
 Video FAQ
Photo Viewer Menu
 Photo FAQ
Music Player Menu
 Music FAQ
Ebook Viewer Menu
Setup Menu
Chapter 4: Technical Details
Troubleshooting
Specifications
1 
						

							LED Pico at a Glance
2
Chapter 1
USB Port
Main Unit Front/Back
Power Button
HDMI
Focus Adjustment
Menu Navigation
Audio Out
Charge Port
AV Input 
						

							Keypad
3
On / OffBack / Exit
Directional Keys 
						

							Accessories
4
*Under various circumstances, the actual accessories may be different from 
those shown in the pictures above.
Tripod
A/V Cable
Micro USB Cable 
						

							Getting Started
1. If you want to charge your LED Pico, simply plug in the Micro USB cable \
to any computer or wall adapter.2. Once your LED Pico is charged, hold down the power button for approximat\
ely three seconds until the unit starts projecting.
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press and the power button once, then again to confirm.2. After a few seconds, the unit should turn off fully.
Note: The LED Pico Projector battery does not charge when it is in operation. 
						

							Focus Adjusment / Throw Distance
Focus Adjustment
• Spin the focus wheel up or down until the image becomes 
clear.
6
DIAGONAL SCREEN SIZE
16:9 Aspect  Ratio
Throw Distance Chart
Distance inch (“)2638516375
Diagonal Inch (“)1725344250
Throw Ratio 1.5
*minimum throw distance: 10 inches 
						

							Connecting to a Computer via HDMI
Connect one end of the 
7
HDMI Cord
to your computer’s
HDMI Adapter
HDMI Cord
to your LED Picos 
HDMI Adapter
Step 1:
Step 2:
Step 3:
Select “INPUT” icon
In the Main Menu 
Connect one end of the 
Select “HDMI” icon 
						

							Connecting to a Computer Cont.
Step 4:
Enabling HDMI output on your Computer – To enable HDMI output on your computer most comput-ers require “turning on” the video output feature.  Each computer \
is different.  Please consult your owner’s manual for instructions to enable HDMI output.  Below are standard ins\
tructions for a Windows XP computer – not all systems are the same.
Press function & “F5” to instruct the computer to enable multiple displays.You can also press Windows+P to toggle through display settings.
*NOTE: different operating sys-tems may differ
Step 5:
1. Right click on computer desk-top and select “Properties”2. Display Properties window will pop up3. Click on the “Settings” Tab4. If a secondary monitor is grayed out, click on it and check “Extend my Windows Desktop onto this monitor”5. If the image is blurry or the text  is not legible, adjust the screen resolution.  We recommend 1280x800. 
Step 6:
8