55EC9300, 77EC9800 LG Oled Tv Owners Guide

							ENGLISH
31MAKING CONNECTIONS
Connecting to an Audio System
You can use an optional external audio system instead of the built-in sp\
eaker.
Digital Optical Audio Connection
Transmits a digital audio signal from the TV to an external device. Conn\
ect the external device and the TV with the optical audio cable as shown in the following illustration.
 
y Do not look into the optical output port. Looking at the laser beam may \
damage your vision.
 
y Audio with ACP (Audio Copy Protection) function may block digital audi\
o output.
 NOTE
OPTICAL AUDIO IN
Digital Audio System
(*Not Provided)
OPTICAL AUDIO IN
Digital Audio System
(*Not Provided)
(For 55EC9300)(For 77EC9800)   
						

							ENGLISH
32MAKING CONNECTIONS
Connecting headphones (For 77EC9800)
Listening to sound with headphones.
 
y Do not use headsets (earphones) at high volume or for a long time. It \
may cause damage to your hearing.
 
y AUDIO menu options are disabled when headphones are connected.
 
y When changing AV MODE with a headphone connected, the change is applied \
to video but not to audio.
 
y Optical Digital Audio Out is not available when connecting a headphone.
 
y Headphone impedance: 16 
Ω
 
y Max audio output: 0.627 mW to 1.334 mW
 
y Headphone jack size: 3.5 mm (0.13 inches)
 NOTE
(*Not Provided)
Headphone   
						

							ENGLISH
33MAKING CONNECTIONS
Connecting a USB Device
Connect a USB storage device such as USB flash memory, external hard dri\
ve, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files.
Choose any USB input port to connect. It does not matter which port you use.
 ySome USB Hubs may not work. If a USB device connected using a USB Hub is\
 not detected, connect it directly to the USB port on the TV.
 ySome USB device may not work if it does not meet USB 3.0 standard.  In case, connect it to USB IN 2 or USB IN 3 port. (For 77EC9800)
 NOTE
(*Not Provided)
USB / USB HUB / HDD
(*Not Provided)
USB / USB HUB / HDD
(For 55EC9300)
(For 77EC9800)   
						

							ENGLISH
34MAGIC REMOTE FUNCTIONS
MAGIC REMOTE FUNCTIONS
When the message Magic Remote battery is low. Change the battery. is displayed, replace the battery. To install 
batteries, open the battery cover, replace batteries (1.5 V AA) matchi\
ng  and  ends to the label inside the compartment, and close the battery cover. Failure to match the correct p\
olarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient polluti\
on. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the in\
stallation actions in reverse.
 
y Do not mix old and new batteries, as this may damage the remote control.\
 CAUTION
This remote uses infrared light. When in use, it should be pointed in th\
e direction of the TV’s remote sensor.
 (POWER)Turns the TV on or off.
 Navigation buttons (up/down/left/right) Press the up, down, left or right button to scroll the menu.If you press  buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right.
 (Home) Accesses the Home menu.
 (BACK)Returns to the previous screen.
 (EXIT to LIVE)Switches among broadcast (antenna) and various inputs.
 Wheel (OK)Press the center of the Wheel button to select a menu.You can change channels and scroll the menu by using the Wheel button.
 VOL Adjusts the volume level.
/INPU
TDisplays the Screen Remote. * Accesses the Universal Control Menu in some regions. * Pressing and holding the  button will display a menu to select an external device that is connected to the TV.
Used for viewing 3D video.
 (MUTE)Mutes all sounds. * By pressing and holding the  button, VD function will be enabled.SAP(Secondary Audio Program) Feature can also be enabled by pressing the  key.. CH Scrolls through the saved channels.
 (Voice recognition)Network connection is required to use the voice recognition function.1. Press the voice recognition button.2.  Speak when the voice display window appears on the left of the TV screen.*  Use the Magic Remote no further than 10 cm (4 inch) from your face.*  The voice recognition may fail when you speak too fast or too slowly.*  The recognition rate may vary depending upon the user’s characteristics (voice, pronunciation, intonation, and speed) and the environment (noise and TV volume).
Color buttonsThese access special functions in some menus.( Red,  Green,  Yellow,  Blue)
/INPUT
P
VOL CH     
						

							ENGLISH
35MAGIC REMOTE FUNCTIONS
Registering Magic Remote 
The Magic Remote operates by pairing with your TV.
How to register the Magic Remote
(Wheel)
To use the Magic Remote, first pair it with your TV. 1  Put batteries into the Magic Remote and turn the TV on.2  Point the Magic Remote at your TV and press the  Wheel (OK) on the remote control.*  If the TV fails to register the Magic Remote, try again after turning the TV off and back on.
How to deregister the Magic Remote 
(BACK)
 
(Home)
Press the  (BACK) and  (Home) at the same time, for five seconds, to unpair the Magic Remote with your TV. » 
Pressing and holding the  (EXIT to LIVE) button will let you cancel and re-register Magic Remote at once.
How to use Magic Remote 
 yShake the Magic Remote slightly to the right and left or press  (Home), /INPU T,  buttons to make the pointer appear on the screen. (In some TV models, the pointer will appear when you turn the Wheel button.) y 
If the pointer has not been used for a certain period of time or Magic Remote is placed on a flat surface, then the pointer will disappear. y 
If the pointer does not move as you wish, shake Magic Remote to the left and right. The pointer will move to the center of the screen. y 
The Magic Remote depletes batteries faster than a normal remote due to the additional features.
Precautions to Take when Using the 
Magic Remote 
 yUse the Magic remote within the maximum communication distance (10 m, 32.8 ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure.
 yA communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic remote.
 yThe Magic remote may be damaged or may malfunction if it is dropped or receives a heavy impact.
 yTake care not to bump into nearby furniture or other people when using the Magic remote.
 yManufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric wave interference.
 yIt is recommended that an Access Point (AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m (3.28 ft), the Magic remote may not perform as expected due to frequency interference.    
						

							ENGLISH
36USING THE USER GUIDE
USING THE USER GUIDE
User Guide allows you to easily access detailed TV information.
1 Press  (Home) button to access the Home menu.
2 Select User Guide and press the  Wheel (OK) button.
   
						

							ENGLISH
37SPECIFICATIONS
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrad\
e of product functions.
Power requirementAC 120 V ~ 50 / 60 Hz
Television SystemNTSC-M, ATSC, 64 & 256 QAM
Program CoverageVHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance75 Ω
Environmentcondition
Operating Temperature0 - 40 °C (32 °F ~ 104 °F)
Operating HumidityLess than 80 %
Storage Temperature-20 - 60 °C (- 4 °F ~ 140 °F)
Storage HumidityLess than 85 %
MODELS55EC9300(55EC9300-UA)
Dimensions (W x H x D)
With stand1,225 x 753 x 204 (mm)
48.2 x 29.6 x 8.0 (inch)
Without stand1,225 x 715 x 44 (mm)
48.2 x 28.1 x 1.7 (inch)
WeightWith stand16.7 kg (36.8 Ibs)
Without stand14.7 kg (32.4 Ibs)
Current Value / Power consumption3.2 A / 320 W
MODELS77EC9800(77EC9800-UA)
Dimensions (W x H x D)
With stand1,718 x 1,110 x 322 (mm)
67.6 x 43.7 x 12.6 (inch)
Without stand1,718 x 1,064 x 33.7 (mm)
67.6 x 41.8 x 1.3 (inch)
WeightWith stand43.3 kg (95.4 Ibs)
Without stand39.9 kg (87.9 Ibs)
(For 55EC9300)
Wireless module (LGSBW41) Specifications
Wireless LanBluetooth
StandardIEEE 802.11a/b/g/nStandardBluetooth Version 3.0
Frequency Range2400 to 2483.5 MHz5150 to 5250 MHz5725 to 5850 MHzFrequency Range2400 to 2483.5MHz
Output Power (Max.)
802.11a: 11.5 dBm802.11b: 11 dBm802.11g: 10.5 dBm802.11n - 2.4GHz: 11 dBm802.11n - 5GHz: 12.5 dBm
Output Power (Max.)10 dBm or Lower
 yBecause band channel used by the country could be different, the user ca\
n not change or adjust the operating frequency and this product is set for the regional frequency table. yThis device should be installed and operated with minimum distance 20 cm\
 (7.8 inch) between the device and your body. And this phrase is for the general statement for consideration of user environmen\
t. yContains FCC ID: BEJLGSBW41 / Contains IC: 2703H-LGSBW41   
						

							ENGLISH
38SPECIFICATIONS / EXTERNAL CONTROL DEVICE SETUP
(For 77EC9800)
Wireless module (LGSWF41) Specifications
StandardIEEE 802.11a/b/g/n/ac
Frequency Range2400 to 2483.5 MHz5150 to 5250 MHz5725 to 5850 MHz
Output Power (Max.)
802.11a: 11.5 dBm802.11b: 14.5 dBm802.11g: 16.5 dBm802.11n - 2.4GHz: 16.5 dBm802.11n - 5GHz: 14.5 dBm802.11ac - 5GHz : 14.5 dBm
 yBecause band channel used by the country could be different, the user ca\
n not change or adjust the operating frequency and this product is set for the regional frequency table. yThis device should be installed and operated with minimum distance 20 cm\
 (7.8 inch) between the device and your body. And this phrase is for the general statement for consideration of user environmen\
t. yContains FCC ID: BEJLGSWF41 / Contains IC: 2703H-LGSWF41
Bluetooth module (BM-LDS401) Specifications
StandardBluetooth Version 3.0
Frequency Range2400 to 2483.5 MHz
Output Power (Max.)10 dBm or Lower
 yContains FCC ID : BEJLDS401 / Contains IC : 2703H-LDS401
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com .   
						

							ENGLISH
39MAINTENANCE / TROUBLESHOOTING
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep it at peak performance and to extend the\
 product lifespan.
 
y Before cleaning, turn the power off and disconnect the power cord and al\
l other cables.
 
y When the TV is left unattended or unused for a long time, disconnect the\
 power cord from the wall outlet to prevent possible 
damage from lightning or power surges.
 CAUTION
Screen, Frame, Cabinet, and Stand
To remove dust or light dirt, wipe the surface with a dry, clean, and so\
ft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in cle\
an water or a diluted mild detergent. Then wipe immediately with a dry cloth.
 
y Do not push, rub, or hit the surface with your fingernail or a sharp obj\
ect, as this may result in scratches on the screen and 
image distortions.
 
y Do not use any chemicals, such as waxes, benzene, alcohol, thinners, ins\
ecticides, air fresheners, or lubricants, as these may 
damage the screen’s finish and cause discoloration.
 
y Do not spray liquid onto the surface. If water enters the TV, it may res\
ult in fire, electric shock, or malfunction.
 CAUTION
Power Cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
ProblemSolution
Cannot control the TV with the remote control.
 yCheck the remote control sensor on the product and try again. yCheck if there is any obstacle between the product and the remote contro\
l. yCheck if the batteries are still working and properly installed ( to ,  to ).
No image display and no sound is produced.
 yCheck if the product is turned on. yCheck if the power cord is connected to a wall outlet. yCheck if there is a problem in the wall outlet by connecting other produ\
cts.
The TV turns off suddenly.
 yCheck the power control settings. The power supply may be interrupted. yCheck if the Sleep Timer/Time Power Off is activated in the TIMERS settings. yIf there is no signal while the TV is on, the TV will turn off automatic\
ally after 15 minutes of inactivity.