3M Super Close Projection System SCP715/SCP740/SCP 717 Operators Guide

6 © 3M 2008.  All Rights Reserved.

Usage Notice  3M™ Super Close Projection System  
Important Note
 1.  
This product will detect the life of the lamp itself. Please be 
sure to change the lamp when it shows warning messages.
 2.   Reset the “Lamp Counter Reset” function from the On 
Screen Display “Management” menu after replacing the 
lamp module (refer to page 28).
 3.   When switching the projector off, please allow the projector 
to complete its cooling cycle before disconnecting the power.
 4....

© 3M 2008.  All Rights Reserved.  7

3M™ Super Close Projection System Introduction
Product Features
3M Super Close Projection System SCP715/SCP717 
are XGA single chip 0.7” DLP® projectors and 3M Super 
Close Projection System SCP740 is a WXGA single chip 
0.65” DLP® projector. Outstanding features include:
   SCP715/SCP717 - True XGA, 1024 x 768 addressable 
pixels
  SCP740 - True WXGA, 1280 x 800 addressable pixels
 Texas Instruments Single chip DLP® Technology
 NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM...

8 © 3M 2008.  All Rights Reserved.

Introduction  3M™ Super Close Projection System

US AC Power Cord
VGA Cable
Wireless Remote Controller
Projector
Package Overview
This projector comes with all the items shown below. 
Check to make sure your unit is complete. Contact your 
dealer immediately if anything is missing.
Documents : 
	Operator’s Guide
	Quick Start Card
	Product Safety Guide
	WEEE Card
2 x AA Batteries
UK AC Power Cord
EUR AC Power Cord3.5mm Audio Cable
USB Cable 

© 3M 2008.  All Rights Reserved.  9

3M™ Super Close Projection System Introduction

1. Control Panel
2.  Focus Ring
3.  Projection Lens
4.  Elevator Button
5.  Elevator Foot
6.  Power Socket
7.  Connection Ports
8.  IR Receivers
Main Unit
Product Overview
1
2
3
5
87
6
4 

10  © 3M 2008.  All Rights Reserved.

Introduction  3M™ Super Close Projection System

Control Panel
1. Four Directional Select Keys
2.  Keystone +/-
3.  Enter
4.  Menu (On/Off)
5.  Source Select
6.  Re-Sync
7.  Power/Standby
8.  Power/Standby LED 
9.  Lamp Indicator LED
10.  Temp Indicator LED
1246
23579
810 

© 3M 2008.  All Rights Reserved.  11

3M™ Super Close Projection System Introduction

Connection Ports
1. Power Socket
2.  5V-Relay Connector (Output: 5VDC, 2A 
)
3.  RS232 Connector
4.  Audio Input Connector
 (for S-Video or Composite)
5.  Audio Output Connector
6.  Audio Input Connector (for DVI-D or RGB1-In or RGB2-In)
7.  Kensington
TM Lock Port
8.  Networking Connector RJ45
9.  USB Connector (connect to PC for Remote Mouse function) 
10.  Composite Video Input Connector
11.  S-Video Input...

12  © 3M 2008.  All Rights Reserved.

Introduction  3M™ Super Close Projection System
Remote Control with Mouse Function
1. Power
2.  Mute
3.  Timer
4.  Display Format
5.  Mouse
6.  Mouse Right Click
7.  Page Up
8.  Page Down
9.  Four Directional Select 
Keys
10.  Re-Sync
11.  Enter
12.  S-Video Source
13.  Composite Video 
Source
14.  DVI Source
15.  Source Lock
16.  Blank
17.  Freeze
18.  Display Mode
19.  Mouse Left Click
20.  Zoom In
21.  Zoom Out
22.  Clear 
23.  Menu 
24.  VGA1 Source
25.  VGA2...

© 3M 2008.  All Rights Reserved.  13

3M™ Super Close Projection System Installation
Connecting the Projector
1.........................................................................\
...........................Power Cord2.........................................................................\
..............Audio Output Cable3..............................................................Network Cable (optional accessory)4.........................................................................\...

14  © 3M 2008.  All Rights Reserved.

Installation  3M™ Super Close Projection System  

Connect the Video
1.........................................................................\
...........................Power Cord2.........................................................................\
..............Audio Output Cable3................................................Composite Video Cable (optional accessory)4.............................................................S-Video Cable  (optional...

© 3M 2008.  All Rights Reserved.  15

3M™ Super Close Projection System Installation

Powering On the Projector
1. Ensure that the power cord and signal cable are securely 
connected. The Power LED will turn red.
2.  Turn on the lamp by pressing “Power/Standby” button on the 
control panel. And the Power LED will turn blue.
3. Turn on your source (computer, notebook, video player, 
etc.). The projector should automatically detect your source 
within “Management” menu; check that “Input Source” has...