3M Multimedia Projector X62 Operators Manual

							
X62
Multimedia Projector
Product Safety Guide
X62 Projecteur multimedia - Guide de Sécurité de Produit
X62 Multimedia-Projektor - Sicherheitsanleitung des Geräts
X62 Proyector de Multimedia - Guiá de Seguridad del Producto
X62 Proiettore Multimediale - Guida di Sicurezza del Prodotto
X62 Multimedia Projector - Veiligheidsgids op Product
X62 Projector dos Multimedia - Guia da Segurança de Produto
X62 Multimedia-Projector- Bruksanvisning för Produktsäkerhets
X62 多媒体投影机 - 产品安全指南
X62 멀티미디어 프로젝터 - 제품 안전 가이드
X62 Multimediaprojektori - Laitteen turvaohjeet 
						

							
3M™ Multimedia Projector X62 Product Safety Guide© 3M 20062 
						

							
3M™ Multimedia Projector X62 Product Safety Guide© 3M 20063

Table of Contents
ENGLISHSafety Information  ........................................................................\
................................................................5Product Safety Labels  ........................................................................\
...........................................................9Lamp  ........................................................................\
........................................................................\
...........10Warranty  ........................................................................\
........................................................................\
......13
中文安全信息........................................................................\
........................................................................\
......77产品安全标签........................................................................\
......................................................................81灯泡........................................................................\
........................................................................\
..............82保证........................................................................\
........................................................................\
..............85
한국어안전 정보  ........................................................................\
........................................................................\
....86상품 안전 라벨 ........................................................................\
...................................................................90램프........................................................................\
........................................................................\
..............91보증 사항  ........................................................................\
........................................................................\
....94
中   文
ENGLISH

한국어 
						

							
3M™ Multimedia Projector X62 Product Safety Guide© 3M 2006

ENGLISH 
						

							
3M™ Multimedia Projector X62 Product Safety Guide© 3M 2006

Safety Information
Read, understand, and follow all safety information contained in the 
“Product Safety Guide” and in the “Operator ’s Guide” prior to using 
the X62 Multimedia Projector. Service personnel must also read and 
understand the safety information contained in the “Service Manual”. 
Retain these instructions for future reference.
Intended Use
The 3M™ Multimedia Projector X62 was designed, built and tested for use 
indoors, using 3M brand lamps, 3M brand ceiling mount hardware and nominal 
local voltages. This projector is not intended for household use or use by children. 
The use of other replacement lamps, outdoor operation or different voltages has 
not been tested and could damage the projector or peripheral equipment and/or 
create a potentially unsafe operating condition.
Explanation of Signal Words and Symbols in Safety Labels and Instructions
WARNING: Indicates a potentially hazardous situation, which if not 
avoided, could result in death or serious injury.
CAUTION:  Indicates a potentially hazardous situation, which if not 
avoided, may result in minor or moderate injury.
 Warning: Hazardous Voltage
 Warning: Hazardous High Temperature
 Warning: High Pressure
 Attention: Refer to Safety Instructions in Guides
ENGLISH 
						

							
3M™ Multimedia Projector X62 Product Safety Guide© 3M 20066

ENGLISHENGLISH
• To reduce the risk associated with choking:
 -  Keep the battery and battery holder away from children and pets.
• To reduce the risk associated with exposure to hazardous voltage:
 -    Disconnect power cord when the projector is not in use, during lamp 
replacement, and while cleaning.
	 -	 	
Do	not	remove	any	screws	other	than	those	specified	in	the	lamp	replacement	
instructions.
  - Do not store or operate this projector in wet environments. Do not store or operate this projector in wet environments.
  -  Do not modify this projector.- Do not modify this projector. Do not modify this projector.
  -    Do not attempt to service the projector - there are no user serviceable \
parts, 
other than the lamp cartridge, inside the projector. Contact a 3M authorized 
service provider for service.
 -  Do not allow water or other liquids to enter the projector.
•  To reduce the risk associated with environmental contamination due to mercury:
  -   Dispose of lamp cartridge in accordance with applicable federal, state and local 
regulations.
•	 To	reduce	the	risk	associated	with	exposure	to	hazardous	voltage	and/or	fire:
 -  Replace power cord if damaged.
 -  Contact a 3M authorized service provider if the projector becomes damage\
d.
 -    Use a grounded extension cord with a rating at least equal to that of the projector.
 -  Connect this projector to a grounded outlet.
•   To reduce the risk associated with hazardous voltage, impact, tripping, a\
nd 
intense visible light:
 -  Do not use this projector around unsupervised children.
• To reduce the risk associated with hot surface of lamp cartridge:
 -    Unplug the projector from the electrical outlet and allow the lamp to co\
ol for  
minutes before replacing the lamp.
• To reduce the risk associated with a ruptured lamp:
 -  Always handle the fragile lamp module with care.
 -  Remove the projector from the ceiling or wall mount before replacing the\
 lamp.  
 -    Use care when replacing the lamp module in the event of a lamp rupture -\
 small 
glass particles and small amounts of mercury may be present.
 -  Ventilate the area where the lamp rupture occurred.
 -  Wear safety goggles and gloves when cleaning up ruptured lamp debris.
 -    Carefully collect the ruptured lamp debris in a closed container and dis\
pose of 
the container and the expired lamp module in accordance with federal, st\
ate, 
and local regulations.
 -  Wash your hands thoroughly after handling ruptured lamp debris.
 -  Replace the lamp module when the lamp replacement message appears.
 -  Never replace the lamp module with a previously used lamp module.
WARNING 
						

							
3M™ Multimedia Projector X62 Product Safety Guide© 3M 2006

ENGLISHENGLISH
CAUTION
•    To reduce the risk associated with explosion, and/or chemicals from a leaking battery:
  - Use only with battery type AA or equivalent. Use only with battery type AA or equivalent.
  - �rient the battery �s plus ����and minus �-�� terminals of the batteries according to   � rient the battery �s plus  ���� and minus  �-�� terminals of the batteries according to 
the markings found on the remote control.
  - Do not leave the battery in the remote for an extended period of time.  Do not leave the battery in the remote for an extended period of time.
	 - Do not heat ��disassem �le ��short ��rechar �e��or e �pose to fire or hi �h temperat �re �	 Do 	not 	heat ��	disassem �le ��	short ��	rechar �e��	or 	e �pose 	to 	fire 	or 	hi �h	temperat �re �
  - Do not carry batteries loose in your pocket or purse.  Do not carry batteries loose in your pocket or purse.
  - Avoid eye and skin contact in the event that battery would leak. Avoid eye and skin contact in the event that battery would leak.
  - Do not mix used and new batteries. Do not mix used and new batteries.
•  To reduce the risk associated with the impact of a falling projector:
  - Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling   Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling 
mounting is desired.
	 -�nstallation o ��the ���� wall�ceilin� �it m �st only �e per��ormed �y �� alified personnel �		�nstallation 	o ��	the 	����	 wall�ceilin �	�it	m �st 	only 	�e	per ��ormed 	�y	�� alified 	personnel �
  - Adhere strictly to the proper installation procedure as outlined in the installation   Adhere strictly to the proper installation procedure as outlined in the installation 
instructions when installing the 3M™ wall/ceiling kit.
	 -�lways operate the �nit on a ��at ��st �rdy ��and hori �ontal s �r��ace �	�lways 	operate 	the 	�nit 	on 	a 	�� at ��	st �rdy ��	and 	hori �ontal 	s � r��ace �
•  To reduce the risk associated with intense visible light:
  - Avoid looking directly into the projector lens while the lamp is on. Avoid looking directly into the projector lens while the lamp is on.
•  To reduce the risk associated with tripping and/or impact:
  - Position the power cord and data cable so that they cannot be tripped over. Position the power cord and data cable so that they cannot be tripped over. 
						

							
3M™ Multimedia Projector X62 Product Safety Guide© 3M 2006

ENGLISH
Important Note
  1.   
Always open the lens shutter or remove lens cap when the projection lamp is on.
  2.    To  avoid  premature  lamp  failure,  do  not  change  the  mounting  position  of  the 
projector  �desktop ceiling mount or ceiling desktop mount�� and continue to use the 
same lamp.
		��		
To	avoid	red�ced	lamp	li��e��	do	not	to�ch	projection	lamp	with	�are	fin�ers�
  .   To  avoid  reduced  image  quality,  do  not  touch  projection  lens  or  other  internal 
optical components.
  .   Do  not  use  detergents,  chemicals,  or  any  spray  liquids  for  cleaning  this  unit,  other 
than those referred to in the “�perators Guide”.
  6.   For  maximum  lamp  life,  do  not  strike  or  drop,  improperly  handle,  or  scratch  the 
lamp glass. Also, do not install an old or used lamp. 
		7�		
Keep	 air	filter	 clean�	 Re��er	to	the	 cleanin�	 instr�ctions	 contained	in	the	 “Operator’s	
Guide”.
  .    Keep all ventilation openings free of any obstructions.
  9.   In  some  countries,  the  line  voltage  is  N �T  stable.  This  projector  is  designed  to 
operate  safely  within  a  bandwidth  of  100  to  120  volts  /  220  to  20  volts  �0  to  60 
Hz�� ±10%, but could fail if power drops or surges of ±10 volts occur. In these high-
risk areas, it is recommended to install a power stabilizer unit.
10.    Do not block intake or exhaust air vents. This will cause the projector to over heat 
and shut down.
11. Do not place the projector in direct sunlight or near a hot object such as a heater.
12.   To  prevent  damaging  the  projector,  always  hold  the  projector  whenever  using  the 
elevator buttons to adjust the elevator feet.
13.   Use  the  accessory  cable  or  a  designated-type  cable  for  the  connection.  Some 
cables  have  to  be  used  with  core  set. A  too  long  cable  may  cause  certain  picture 
degradation.  Please  consult  with  your  dealer  for  details.  For  cables  that  have  a 
core only at one end, connect the core to the projector.
1.   Make  sure  that  you  connect  devices  to  the  correct  port.  Incorrect  connection  may 
result in malfunction and/or damage to the device and/or projector.
1.   Do not place the projector in the side/front/rear-up position, except care of the air 
filter� 
						

							
3M™ Multimedia Projector X62 Product Safety Guide© 3M 20069

Product Safety Labels
ENGLISH 
						

							
3M™ Multimedia Projector X62 Product Safety Guide© 3M 200610

Lamp
Lamp Operation:
 The following symptoms may indicate a lamp in need of replacement:
 • LAMP indicator lights up red.
•  To reduce the risk associated with environmental contamination due to 
mercury in the projection lamp:
  -  Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.
 -   The lamp in this product contains mercuy. Dispose of projection lamp in a manner 
that is consistent with your local hazardous waste regulations for mercury.
 -   For recycling and disposal information, contact your respective governmental 
agencies.
     In U.S., contact the Electronic Industries Alliance at www.lamprecycle.org
     In Canada, contact 1- 00-362-3  � 3M Canada ��
WARNING
Display Lamp Operation Hours
 To determine the lamp operation hours, follow these steps:
 1.  While the projector is running, press the MENU button on the remote control.
      Choose the “OPTION” using the ▼ button, and press the ► button or the ENTER button.
   Choose the “LAMP TIME” using the ▼ button.
 2.  The operating time of the lamp will be displayed. 
    The lamp time is the time counted after the last resetting.
√		Note
Please reset the lamp time only when you have replaced the lamp, for a s\
uitable indication about the lamp.
Reset Lamp Hours
  (1)  Press the MENU button to display a menu. Only when the EASY MENU has appeared, 
please perform the next step (2).
  (2)  Point at the “Go To Advance Menu …” in the menu using ▼/▲ button, then press the 
► button. 
  (3)  Point at the “OPTION” in the left column of the menu using ▼/▲ button, then press 
the ► button.
  (4)  Point at the ”LAMP TIME” using ▼/▲ button, then press the ► button. A dialog will 
appear.
  (5)  Press the ▲ button to select “RESET” on the dialog. It performs resetting the lamp 
time.
ENGLISH